feature request: timer status/countdown in ithostatus for roomcontrol Itho DemandFlow/QualityFlow

[rr0xx]

With an Itho DF/QF ventilation system, one can link a (virtual) remote to a specific room/valve. Usually this is a RFT AUTO (536-0150) remote. When using this room-remote, there is no active indication in the ithostatus fields. The only indication of a roomcontrol being activated is a Room Flow/Flap position that seems a bit higher than normally.

For example the timer1/2/3 function on that remote linked to a particular room/valve; the roomtimer status and remaining time will not be visible anywhere within the ithostatus. The only indication of a roomcontrol being activated is a Room Flow/Flap position that seems a bit higher than normally. But if that might end by a set timer or that such higher flows are related to a specific room override setting is nowhere visible. From the status it seems that the DF/QF system is functioning in "auto mode".

Data fields related to timers currently present within ithostatus only relate to the "main/general" timer of the whole DemandFlow unit:

• 3_6_9 hours DemandFlow timer (sec)
• Status timer

Or the cooking timer:

• Timer extractor (sec)
• Status high extractor hood

If possible, the addition of some extra data fields that show if a room override is active and/or limited by a timer would be helpful.