Analog Devices MSDK Development and Contribution Guidelines

Development Flow

Development for the MSDK also follows the official GitHub development flow guidelines.

For beginners, learngitbranching.js.org is a great hands-on starting resource.

Contribution Guidelines

The MSDK follows the GitHub contribution guidelines.

External contributions from outside the Analog Devices organization should be made via a Pull Request opened from a fork. Internal contributions should also preferrably use a fork where possible.

If a direct branch on the mainline MSDK repo is made, the following branch naming conventions should be used when possible:

Bugfix/ticket: fix/ticketnumber
New feature: feature/branchname
Generic development branch: dev/branchname
New and/or modified example branch: example/branchname

PR Title - Subject Responsibilites for Reviewers/Mergers/PR Owners

Format: type(scope)<!>: Subject

For more information of the format, please review the pull_request_template.md.

These are the rules for the Subject.

The first character is capitalized and the subject must not end with any punctuation (!,.?)
Use imperative mood in the Subjects - meaning the tone of the Subject should be like giving an order or request.
- “Add” instead of “Added” or “Adding”.
- “Fix” instead of “Fixed” or “Fixing”.
- “Update” instead of “Updated” or “Updating”.
- “Delete” instead of “Deleted” or “Deleting”.
The Subject contents should have useful and concise wording.
- No long descriptive subjects - not concise if it gets too descriptive.
  - You can be more descriptive in the body or footer of the commit by running: git commit -m “Title contents” -m “Body contents” -m “Footer contents”
- No simple titles like “Add small SPI change”
The Subject should include what parts are affected, if any. Only the parts’ CHIP NAME should be used in the Subject. No die names are allowed.
- For the most readability, append the affected parts list at the end of the Subject, so the important, beginning part of the commit message is visible when traversing through the MSDK repo on GitHub.
- The list of chip names should be in ascending numerical order in the Subject.
- Examples:
  1. fix(CMSIS): Rename TRIMSIR registers for MAX32670 and MAX32675
  2. fix(Third-Party): Remove USB DMA support for MAX32655, MAX32665, MAX32690, MAX78000, and MAX78002
  3. feat(Examples): Add console output in Hello_World READMEs for all parts
  4. fix(Examples,PeriphDrivers): Deprecate MXC\_RTC\_GetSecond and MXC\_RTC\_GetSubSecond for all parts except for MAX32520
    - Use this type of wording if all but a few parts were affected to shorten the Subject.
- TIP: The auto-labeler workflow adds part labels to a PR depending on what specific files were updated. Use the list of labels to figure out what parts were affected by the PR's changes.
If the PR title is related to a Jira ticket or an issue, the Subject should begin with the ticket designation.
- Examples:
  1. fix(CMSIS): MSDK-123: Add missing I2C Target registers for MAX32670, MAX32672, and MAX32675
  2. fix(PeriphDrivers): Ticket-321: Fix SPI hanging on 9-bit wide messages for all parts
  3. fix(Documentation): Issue #123: Revise steps for MSDK installation in the user guides
When a merger “Squash and Merges” an approved PR to main, do not delete the PR number that is automatically appended to the title. Ideally, the PR title should be following our rules before approval, so the merger just needs to press the “Squash and Merge” button.
- Using previous examples from rule 4, this is what the commit should look like in the main branch:
  1. fix(CMSIS): MSDK-123: Add missing I2C Target registers for all parts (#412)
  2. fix(PeriphDrivers): Ticket-321: Fix SPI hanging on 9-bit wide messages for all parts (#646)
  3. feat(Examples): Add console output in Hello_World READMEs for all parts (#342)
  4. fix(Examples,PeriphDrivers): Deprecate MXC\_RTC\_GetSecond and MXC\_RTC\_GetSubSecond for all parts except for MAX32520 (#248)

Please ensure all actions have passed or successfully completed before merging a PR into main. MSDK maintainers have permissions to merge approved PRs even with a failing action.

PR Format Rules (Workflow Enforced)

The type is case-sensitive and must be one of the listed types.
The scope is case-sensitive and must be one of the listed scopes.
The first word of the Subject must be capitalized.
The Subject must not end with any punctuation (periods, commas, exclamation marks).

Style Guide

The MSDK code-base, for the most-part, follows the Linux Kernel coding style and Google's C++ Style Guide with the following exception(s):

Indentations are 4 spaces.

Formatting and styling is enforced via clang-format version 14 and cpplint, which automatically run checks against all PRs. A PR cannot be merged until it passes these checks.

Running the Linter & Formatter

Both utilities can be run locally. cpplint should be run first, then clang-format. Additionally, both should be run from the root directory of the MSDK repo so that their config files are loaded properly.

clang-format rules are loaded from the .clang-format and cpplint rules are loaded from CPPLINT.cfg in the root directory of the repo. As a result, the utilities must also be run from the root directory of the repo.

cpplint

cpplint enforces good code practices by scanning for common mistakes and ensuring certain higher-level code patterns are followed. It's a good idea to resolve the errors found by cpplint before before running clang-format, which deals with lower-level code styling and syntax patterns.

cd into the root directory of the MSDK repo.

Run cpplint.

To run cpplint on a file, use cpplint <filepath>.

 $ cpplint Examples/MAX78000/Hello_World/main.c
 Done processing Examples/MAX78000/Hello_World/main.c

To recursively run cpplint on an entire directory, use cpplint --recursive <filepath>.

 $ cpplint --recursive Examples/MAX78000

 Examples/MAX78000/ADC/example_config.h:1:  #ifndef header guard has wrong style, please use: EXAMPLES_MAX78000_ADC_EXAMPLE_CONFIG_H_  [build/header_guard] [5]
 Examples/MAX78000/ADC/example_config.h:14:  #endif line should be "#endif  // EXAMPLES_MAX78000_ADC_EXAMPLE_CONFIG_H_"  [build/header_guard] [5]
 Done processing Examples/MAX78000/ADC/example_config.h
 Done processing Examples/MAX78000/ADC/main.c
 Done processing Examples/MAX78000/AES/main.c
 Done processing Examples/MAX78000/ARM-DSP/arm_bayes_example/arm_bayes_example_f32.c
 ...

Resolve any errors.
git add and git commit any changes to your code.

clang-format

clang-format is a code formatter and style checker that enforces a common style for the code-base. The MSDK uses version 14, which is sometimes not available by default on some Linux distributions. It can be retrieved from https://apt.llvm.org/.

cd into the root directory of the MSDK repo.

Run clang-format.

To run a clang-format check on a file, use the -n "dry-run" flag.

clang-format-14 --style=file --Werror --verbose -n <filename>

For example:

 $ clang-format-14 --style=file --Werror --verbose -n Examples/MAX78000/CRC/main.c

 Formatting [1/1] Examples/MAX78000/CRC/main.c
 Examples/MAX78000/CRC/main.c:86:40: error: code should be clang-formatted [-Wclang-format-violations]
     for (i = 0; i < DATA_LENGTH; i++) { array[i] = i; }
                                     ^

To apply the formatter to automatically format a file, use the -i flag.

clang-format-14 --style=file --Werror --verbose -i <filename>

For example:

 $ clang-format-14 --style=file --verbose -i Examples/MAX78000/CRC/main.c
 Formatting [1/1] Examples/MAX78000/CRC/main.c

This will apply the formatter and overwrite the file. Check the formatter's work using git diff.

 :::diff
 $ diff --git a/Examples/MAX78000/CRC/main.c b/Examples/MAX78000/CRC/main.c
 index 1dda1feed..c16ceb962 100644
 --- a/Examples/MAX78000/CRC/main.c
 +++ b/Examples/MAX78000/CRC/main.c
 @@ -83,7 +83,9 @@ void Test_CRC(int asynchronous)

     printf(asynchronous ? "TEST CRC ASYNC\n" : "TEST CRC SYNC\n");

 -    for (i = 0; i < DATA_LENGTH; i++) { array[i] = i; }
 +    for (i = 0; i < DATA_LENGTH; i++) {
 +        array[i] = i;
 +    }

To apply the formatter to multiple files, the * and ** wildcard characters can be used. * matches any file or folder, and ** recursively matches any file or folder.

To recursively run clang-format on all C files in an entire directory, use:

clang-format-14 --style=file --verbose -n <filepath>/**/*.c.

For example:

 $ clang-format-14 --style=file --verbose -i Examples/MAX78000/ARM-DSP/**/*.c

 Formatting [1/24] Examples/MAX78000/ARM-DSP/arm_bayes_example/arm_bayes_example_f32.c
 Formatting [2/24] Examples/MAX78000/ARM-DSP/arm_class_marks_example/arm_class_marks_example_f32.c
 Formatting [3/24] Examples/MAX78000/ARM-DSP/arm_convolution_example/arm_convolution_example_f32.c
 Formatting [4/24] Examples/MAX78000/ARM-DSP/arm_convolution_example/math_helper.c
 Formatting [5/24] Examples/MAX78000/ARM-DSP/arm_dotproduct_example_f32/arm_dotproduct_example_f32.c
 ...

... which runs the formatter for all C files in the Examples/MAX78000/ARM-DSP directory and all its subdirectories. It should be noted that ** is not supported on native Windows, but * is.

git add and git commit any changes to your code. Now, it's ready for a PR! The same checks will be automatically run against any PRs that are opened in the MSDK, and they must pass before the code can be approved.

Contributing Examples

First, ensure that the example project has been linted and formatted to follow the Style Guide
Copy the example project into the Examples folder of the SDK for the applicable target microcontrollers.
git add and git commit the Example project. Commit your project files before running MSDKGen.
Run the MSDKGen utility to ensure the example project's support files are updated to the latest version.
```
 python msdkgen.py update-all --projects yourprojectname --overwrite
```
Re-test the project if applicable.
If the updated files break any projects they can be restored to the previously working version using the git restore command.

For example, the command below will restore all files in your current working directory.
```
 git restore **
```
The git diff command can also be used to inspect local changes to help identify the root cause. Ex:
```
 git diff ./
```

Contributing Libraries

Libraries should be added to the Libraries sub-folder of the MSDK.

All libraries should include a libraryname.mk file that can be added to Libraries/libs.mk via a toggle-switch. The filename should match the name of library as closely as possible, and expose any required configuration variables.
If necessary, a library may also include a "core" Makefile or set of Makefiles to build it as a standalone static library file. The naming convention is lib<libraryname>.a.

Self-Locating Makefile

The first thing that the libraryname.mk file should do is locate its own directory and store it in a variable. The code snippet can be used to achieve this.

:::Makefile
ifeq "$(LIBRARYNAME_DIR)" ""
# If LIBRARYNAME_DIR is not specified, this Makefile will locate itself.
LIBRARYNAME_DIR := $(dir $(abspath $(lastword $(MAKEFILE_LIST))))
endif

All filepaths for the library should then use this $(LIBRARYNAME_DIR)-type variable as their "root" for all filepaths. This is a safe and reliable way to self-reference internal library files.

For an example, see the Libraries/PeriphDrivers/periphdriver.mk file.

Simple Libraries

For simple libraries, it may be sufficient to just add the library's source files to the build using VPATH and IPATH.

For example:

:::Makefile
IPATH += $(LIBRARY_NAME_DIR)/include
VPATH += $(LIBRARY_NAME_DIR)/src
SRCS += libfile1.c
SRCS += libfile2.c

An example of this is MiscDrivers, which is a simple source-file-only library. It gets its source code selectively added to the build via Libraries/Boards/MAX78000/EvKit_V1/board.mk files.

Advanced Libraries

More advanced libraries (including those with a large number of source files) should include a rule to build as a static library file with a recursive Make call.

This type of library should also set up the appropriate configuration variables to include that static library to the build.

Contributing Documentation

Code Maintainers

MSDK code should be documented using Doxygen syntax on all public functions, data structures, and variables. See the DoxyGen Manual for more details on syntax for C-like languages.

DoxyGen is automatically run across the MSDK code as part of the User Guide's build process. A Peripheral API reference is generated for each target microcontroller using the Doxygen files located in Libraries/PeriphDrivers/Documentation, and the output is packaged as a sub-component of the User Guide when it's built. For code maintainers no action is needed other than maintaining up to date Doxygen documentation for all source code.

User Guide

An MSDK User Guide is maintained in the USERUIDE.md file. This document contains higher-level usage info for the MSDK. If a part, IDE, or library is supported by the MSDK then there should be some relevant info in the User Guide covering its setup, configuration, and usage.

When writing markdown links, relative paths should always be used. Additionally, links to local files on the user's filesystem cannot be used, since the online copy of the docs will throw a 404 on them. See Writing Your Docs for more details.

Static resources such as images should be placed in the res folder.

Building the Documentation

Local Builds

The Documentation/build.py script can be used to build the MSDK User Guide and supporting documentation locally. This script:

Builds all the Peripheral API references using Doxygen and copies them into Documentation
Copies any markdown (.md) files from the root of the repo into Documentation
Builds the MSDK User Guide using Mkdocs, which packages everything in Documentation into a static HTML/CSS/JavaScript site in the docs folder.

To build the docs:

Install doxygen
Add doxygen's binary diretory to the Environmental Path Variable
Install Python 3
pip install -r Documentation/requirements.txt
python Documentation/build.py
The site will be built in the docs folder of the repo.

To preview the generated site:

mkdocs serve

This will open a localhost test server with live re-loading.

To configure the generated site, use mkdocs.yml. See Mkdocs Configuration for more details.

Auto Builds and Deployment

The "Build & Deploy Docs" Github Action will perform all the local steps above. Additionally, it will deploy the static site to the gh-pages branch of the repository for use with Github Pages. When the gh-pages branch is updated, Pages will refresh the online copy of the documentation within ~5-10 mins.

This auto-deploy procedure is triggered on every push to the release branch.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

CONTRIBUTING.md

CONTRIBUTING.md

Analog Devices MSDK Development and Contribution Guidelines

Development Flow

Contribution Guidelines

PR Title - Subject Responsibilites for Reviewers/Mergers/PR Owners

PR Format Rules (Workflow Enforced)

Style Guide

Running the Linter & Formatter

cpplint

clang-format

Contributing Examples

Contributing Libraries

Self-Locating Makefile

Simple Libraries

Advanced Libraries

Contributing Documentation

Code Maintainers

User Guide

Building the Documentation

Local Builds

Auto Builds and Deployment

Files

CONTRIBUTING.md

Latest commit

History

CONTRIBUTING.md

File metadata and controls

Analog Devices MSDK Development and Contribution Guidelines

Development Flow

Contribution Guidelines

PR Title - Subject Responsibilites for Reviewers/Mergers/PR Owners

PR Format Rules (Workflow Enforced)

Style Guide

Running the Linter & Formatter

cpplint

clang-format

Contributing Examples

Contributing Libraries

Self-Locating Makefile

Simple Libraries

Advanced Libraries

Contributing Documentation

Code Maintainers

User Guide

Building the Documentation

Local Builds

Auto Builds and Deployment