diff --git a/docs/tests/plugins/datalogger/datalogger_test.rst b/docs/tests/plugins/datalogger/datalogger_test.rst
new file mode 100644
index 0000000000..6e76c314cd
--- /dev/null
+++ b/docs/tests/plugins/datalogger/datalogger_test.rst
@@ -0,0 +1,997 @@
+.. _datalogger_tests:
+
+Datalogger Test Suite
+================================================================================
+
+:ref:`User guide<datalogger>`
+
+The following apply to all tests below, any special requirements will be mentioned.
+
+Prerequisites:
+    * Scopy v2.0.0 or later with Data Logger installed on the system
+    * Tests listed as dependencies are successfully completed
+    * Reset .ini files to default by pressing "Reset" button in Preferences
+
+Setup
+-------
+
+.. _adalm_pluto_emu_setup:
+AdalmPluto.Emu:
+    * Open Scopy
+    * Start the iio-emu process using Pluto option from the dropdown
+    * Connect to the Pluto Device
+
+.. _adalm_pluto_device_setup:
+AdalmPluto.Device:
+    * Open Scopy
+    * Connect to the Pluto Device using IP or USB
+
+.. _m2k_emu_setup:
+M2k.Emu:
+    * Open Scopy
+    * Start the iio-emu process using ADALM2000 option from the dropdown
+    * Connect to the M2k Device
+
+.. _TST_DATALOGGER_ENABLE_DISABLE_DATA_LOGGER_CHANNEL:
+Test 1: Enable and Disable Data Logger Channel
+------------------------------------------------
+
+UID: TST.DATALOGGER.ENABLE_DISABLE_DATA_LOGGER_CHANNEL
+
+Description:
+    * Enable the channel and check if the channel is enabled
+
+OS: any
+
+Preconditions:
+    * Connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data Logger plugin
+    2. Using channel menu enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+    4. Wait for some data to be collected
+                * Expected result: Curve will be displayed on the plot
+    5. Using channel menu disable channel "voltage0" of "xadc" device
+                * Expected result: Curve will be removed from the plot
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_RUN_STOP_DATA_LOGGING:
+Test 2 : Run and Stop Data Logging
+------------------------------------
+
+UID: TST.DATALOGGER.RUN_STOP_DATA_LOGGING
+
+Description: 
+    * Start the data logger and check if the data is being collected
+
+OS: any
+
+Preconditions: 
+    * Test 1 is passed
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Using channel menu enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+             * Expected result: Data is being collected and displayed on the plot
+             * Expected result: "Run" button is changed to "Stop"
+    4. Press "Stop" button
+             * Expected result: Data is no longer being collected and displayed on the plot
+             * Expected result: "Stop" button is changed to "Run"
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_CLEAR_COLLECTED_DATA:
+Test 3 : Clear Collected Data
+------------------------------
+
+UID: TST.DATALOGGER.CLEAR_COLLECTED_DATA
+
+Description: 
+    * Clear the data and check if the data is removed from the plot
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Using channel menu enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+    4. Wait for some data to be collected
+    5. Press "Stop" button
+    6. Press "Clear" button
+             * Expected result: Data is removed from the plot
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_CLEAR_DATA_WHILE_RUNNING:
+Test 4 : Clear data while running 
+----------------------------------
+
+UID: TST.DATALOGGER.CLEAR_DATA_WHILE_RUNNING
+
+Description: 
+    * Clear the data while running and check if the data is removed from the plot
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Using channel menu enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+    4. Wait for some data to be collected
+    5. Press "Clear" button
+             * Expected result: Data is removed from the plot and buffer is cleared the starting point is reset to "0"
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_CREATAE_NEW_DATA_LOGGER_TOOL:
+Test 5 : Create a New Data Logger Tool
+---------------------------------------
+
+UID: TST.DATALOGGER.CREATAE_NEW_DATA_LOGGER_TOOL
+
+Description: 
+    * Create a new tool and check if the new tool is created
+
+
+OS: any
+
+Preconditions: 
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Press "+" button
+             * Expected result: New tool is created we are moved to the new tool the new tool has "x" button next to "+"
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_REMOVE_AN_CREATED_TOOL:
+Test 6 : Remove an Created Tool
+---------------------------------
+
+UID: TST.DATALOGGER.REMOVE_AN_CREATED_TOOL
+
+Description: 
+    * Remove the tool and check if the tool is removed
+
+OS: any
+
+Preconditions: 
+    * Test 5 is passed
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Seteps:
+    1. Open Data logger plugin
+    2. Press "+" button
+    3. Press "x" button next to "+"
+             * Expected result: Tool is removed
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_VERTIFY_REMOVAL_DISABLED_FOR_DEFAULT_TOOL:
+Test 7 : Verify Removal Disabled for Default Tool
+--------------------------------------------------
+
+UID: TST.DATALOGGER.VERTIFY_REMOVAL_DISABLED_FOR_DEFAULT_TOOL
+
+Description: 
+    * Check if the remove tool is disabled for the first tool
+
+OS: any
+
+Preconditions: 
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Press "+" button
+             * Expected result: A new tool where "x" button is available is created 
+    3. Open original data logger tool
+             * Expected result: No "x" button is available
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_PRINT_COLLECTED_DATA:
+Test 8 : Print Collected Data
+------------------------------
+
+UID: TST.DATALOGGER.PRINT_COLLECTED_DATA
+
+Description: 
+    * Print the data and check if the data is printed
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Using channel menu enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+    4. Wait for some data to be collected
+    5. Press "Print" button
+    6. Chose directory where to save the file
+             * Expected result: Data is saved to a pdf file in the chosen directory
+             * Expected result: The file name structure is "Sopy-Data-Logger-<date>-<time>.pdf"
+
+Result:
+  * pass / fail
+  * 1 / 0
+  * true / false
+
+.. _TST_DATALOGGER_INFO_BUTTON_DOCUMENTATION:
+Test 9 : Info button documentation
+------------------------------------
+
+UID: TST.DATALOGGER.INFO_BUTTON_DOCUMENTATION
+
+Description: 
+    * Check if the info documentation option works
+
+OS: any
+
+Preconditions: 
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+    * An internet connection is available
+
+Steps:
+    1. Open Data logger plugin
+    2. Press "Info" button
+    3. Press "Documentation" button
+             * Expected result: A browser window is opened with the documentation page
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_INFO_BUTTON_TUTORIAL:
+Test 9 : Info button tutorial   
+-----------------------------------
+
+UID: TST.DATALOGGER.INFO_BUTTON_TUTORIAL
+
+Description: 
+    * Check if the info tutorial option works
+
+OS: any
+
+Preconditions: 
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Press "Info" button
+    3. Press "Tutorial" button
+             * Expected result: A tutorial explaining how to use the data logger is displayed
+
+Result: 
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_SETTINGS_CHANGE_DATA_LOGGER_TOOL_NAME:
+Test 10 : Settings Change Data Logger Tool Name
+------------------------------------------------
+
+UID: TST.DATALOGGER.SETTINGS_CHANGE_DATA_LOGGER_TOOL_NAME
+
+Description: 
+    * Change the tool name and check if the tool name is changed
+
+OS: any
+
+Preconditions: 
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Press "Settings" button
+    3. Change the tool name at the top of the Settings menu from "Data Logger" to "Test Tool"
+             * Expected result: Tool name is changed in the tools menu
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_SETTINGS_7_SEGMENT_MIN_MAX:
+Test 11 : Set Valid X-Axis Delta Value
+-----------------------------------------
+
+UID: TST.DATALOGGER.SETTINGS_7_SEGMENT_MIN_MAX
+Description: 
+    * Change the X-Axis Delta Value to a valid input and check if the X-Axis Delta Value is changed
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+    4. Wait for at least 20 seconds
+    5. Press "Settings" button
+    6. Change the X-Axis Delta Value from "10" to "20" then press enter
+             * Expected result: X-Axis displays "20" seconds of data instead of "10" seconds
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_HANDLE_INVALID_X_AXIS_DELTA_VALUE_INPUT:
+Test 12 : Handle Invalid X-Axis Delta Value Input
+----------------------------------------------------
+
+UID: TST.DATALOGGER.HANDLE_INVALID_X_AXIS_DELTA_VALUE_INPUT
+
+Description: 
+    * Change the X-Axis Delta Value to an invalid input and check if the X-Axis Delta Value is not changed
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+    4. Wait for at least 20 seconds
+    5. Press "Settings" button
+    6. Change the X-Axis Delta Value from "10" to "test" then press enter
+             * Expected result: X-Axis displays "10" seconds 
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_ADJUST_X_AXIS_DELTA_VALUE_USING_BUTTONS:
+Test 13 : Adjust X-Axis Delta Value Using Buttons
+----------------------------------------------------
+
+UID: TST.DATALOGGER.ADJUST_X_AXIS_DELTA_VALUE_USING_BUTTONS
+
+Description: 
+    * Change the X-Axis Delta Value using the + / - buttons and check if the X-Axis Delta Value is changed
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+    4. Press "Settings" button
+    5. Press "+" button next to X-Axis Delta Value
+             * Expected result: X-Axis displays "11" seconds of data instead of "10" seconds
+    6. Press "-" button next to X-Axis Delta Value
+             * Expected result: X-Axis displays "10" seconds of data instead of "11" seconds
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_TOGGLE_X_AXIS_UTC_TIME_DISPLAY:
+Test 14 : Toggle X-Axis UTC Time Display
+------------------------------------------
+
+UID: TST.DATALOGGER.TOGGLE_X_AXIS_UTC_TIME_DISPLAY
+
+Description: 
+    * Change the X-Axis UTC Time to enabeld and check if the X-Axis displays UTC time instead of delta value
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+    4. Press "Settings" button
+    5. Toggle the "X-Axis UTC Time" on
+             * Expected result: X-Axis displays UTC time instead of delta value
+    6. Toggle the "X-Axis UTC Time" off
+             * Expected result: X-Axis displays delta value instead of UTC time
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_TOGGLE_X_AXIS_LIVE_PLOTTING:
+Test 15: Toggle X-Axis Live Plotting
+---------------------------------------
+
+UID: TST.DATALOGGER.TOGGLE_X_AXIS_LIVE_PLOTTING
+
+Description: 
+    * Toggle the X-Axis Live plotting off/on and check if the X-Axis displays live data
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+             * Expected result: X-Axis is updated so the last point added is always visible
+    4. Press "Settings" button
+    5. Toggle the "X-Axis Live plotting" off
+             * Expected result: X-Axis displays data collected but the last point added is not always visible
+             * Expected result: Settings for picking date time value to show is now available
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_TOGGLE_Y_AXIS_AUTOSCALE:
+Test 16 : Toggle Y-Axis Autoscale
+------------------------------------
+
+UID: TST.DATALOGGER.TOGGLE_Y_AXIS_AUTOSCALE
+
+Description: 
+    * Toggle the Y-Axis autoscale off/on and check if the Y-Axis displays data with autoscale
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+    4. Press "Settings" button
+    5. Toggle the "Y-Axis autoscale" off
+             * Expected result: Y-Axis displays data without autoscale
+             * Expected result: Settings for picking min and max value is now enabled
+    6. Toggle the "Y-Axis autoscale" on
+             * Expected result: Y-Axis displays data with autoscale 
+             * Expected result: Settings for picking min and max value is now disabled
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_SET_Y_AXIS_MIN_MAX_VALUES:
+Test 17 : Set Y-Axis Minimum and Maximum Values
+-------------------------------------------------
+
+UID: TST.DATALOGGER.SET_Y_AXIS_MIN_MAX_VALUES
+
+Description: 
+    * Change the Y-Axis min and max value and check if the Y-Axis displays data with the new min and max value
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+    4. Press "Settings" button
+    5. Toggle the "Y-Axis autoscale" off
+    6. Change the Y-Axis min value to "0" then press enter
+             * Expected result: Y-Axis displays data has now "0" as bottom value
+    7. Change the Y-Axis max value to "2" then press enter
+             * Expected result: Y-Axis displays data has now "2" as top value
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_ADJUST_CURVE_THICKNESS:
+Test 18 : Adjust Curve Thickness
+-----------------------------------
+
+UID: TST.DATALOGGER.ADJUST_CURVE_THICKNESS
+
+Description: 
+    * Change the curve thickness and check if the curve thickness is changed
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+    4. Press "Settings" button
+    5. Change the curve thickness to "2" then press enter
+             * Expected result: Curve thickness is changed to "2"
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_CHANGE_CURVE_STYLE:
+Test 19 : Change Curve Style
+-------------------------------
+
+UID: TST.DATALOGGER.CHANGE_CURVE_STYLE
+
+Description: 
+    * Change the curve style and check if the curve style is changed
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+    4. Press "Settings" button
+    5. Change the curve style to "dots" then press enter
+             * Expected result: Curve data is displayed as dots instead of lines
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_ADJUST_PLOT_DISPLAY_SETTINGS:
+Test 20 : Adjust Plot Display Settings 
+------------------------------------------
+
+UID: TST.DATALOGGER.ADJUST_PLOT_DISPLAY_SETTINGS
+
+Description: 
+    * Change the plot settings and check if the plot settings are changed
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Press "Settings" button
+    3. Toggle "Buffer Preview" off
+             * Expected result: Buffer preview is not displayed
+    4. Toggle "Buffer Preview" on 
+             * Expected result: Buffer preview is displayed
+    5. Toggle "X-AXIS label" off
+             * Expected result: X-Axis labels is not displayed
+    6. Toggle "X-AXIS label" on
+                * Expected result: X-Axis labels is displayed
+    7. Toggle "Y-AXIS label" off 
+                * Expected result: Y-Axis labels is not displayed
+    8. Toggle "Y-AXIS label" on
+                * Expected result: Y-Axis labels is displayed
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+
+.. _TST_DATALOGGER_VERTIFY_PLOT_DISPLAY_METHOD:
+Test 21 : Verify Plot Display Method  
+-------------------------------------
+
+UID: TST.DATALOGGER.VERTIFY_PLOT_DISPLAY_METHOD
+
+Description: 
+    * Verify that the application displays data in the “Plot” mode correctly
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+     1. Open Data logger plugin
+    2. Enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+            * Expected result: Data is displayed in the plot mode
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_VERTIFY_PLAIN_TEXT_DISPLAY_METHOD:
+Test 22 : Verify Plain Text Display Method
+-------------------------------------------
+
+UID: TST.DATALOGGER.VERTIFY_PLAIN_TEXT_DISPLAY_METHOD
+
+Description: 
+    * Verify that the application displays data in the “Plain Text” mode correctly
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+    4. Press "Text" button
+            * Expected result: Data is displayed in the plain text mode
+
+Result: 
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_VERTIFY_7_SEGMENT_DISPLAY_METHOD:
+Test 23 : Verify 7 Segment Display Method
+------------------------------------------
+
+UID: TST.DATALOGGER.VERTIFY_7_SEGMENT_DISPLAY_METHOD
+
+Description: 
+    * Verify that the application displays data in the “7 Segment” mode correctly
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+    4. Press "7 Segment" button
+            * Expected result: Data is displayed in the 7 segment mode
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_TOGGLE_BETWEEN_DISPLAY_METHODS:
+Test 24 : Toggle Between Display Methods
+------------------------------------------
+
+UID: TST.DATALOGGER.TOGGLE_BETWEEN_DISPLAY_METHODS
+
+Description: 
+    * Verify that the application toggles between the display methods correctly
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+    4. Press "Text" button
+            * Expected result: Data is displayed in the plain text mode
+    5. Press "7 Segment" button
+            * Expected result: Data is displayed in the 7 segment mode
+    6. Press "Plot" button
+            * Expected result: Data is displayed in the plot mode
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_SET_7_SEGMENT_DISPLAY_PRECISION:
+Test 25 : Set 7 Segment Display Precision
+------------------------------------------
+
+UID: TST.DATALOGGER.SET_7_SEGMENT_DISPLAY_PRECISION
+
+Description: 
+    * Change the 7 Segment precision and check if the 7 Segment precision is changed
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+    4. Press "7 Segment" button
+    5. Press "Settings" button
+    6. Change the 7 Segment precision to "2" then press enter
+            * Expected result: 7 Segment displays data with 2 decimal points
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_TOGGLE_7_SEGMENT_MIN_MAX_DISPLAY:
+Test 26 : Toggle 7 Segment Min/Max Display 
+--------------------------------------------
+
+UID: TST.DATALOGGER.TOGGLE_7_SEGMENT_MIN_MAX_DISPLAY
+
+Description: 
+    * Toggle 7 Segment min/max off/on and check if the 7 Segment displays data with min/max values
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+    4. Press "7 Segment" button
+    5. Press "Settings" button
+    6. Toggle the "7 Segment min/max" off
+            * Expected result: 7 Segment displays data without min/max values
+    7. Toggle the "7 Segment min/max" on
+            * Expected result: 7 Segment displays data with min/max values
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_CHOOSE_FILE_FOR_DATA_LOGGING:
+Test 27 : Choose File for Data Logging
+----------------------------------------
+
+UID: TST.DATALOGGER.CHOOSE_FILE_FOR_DATA_LOGGING
+
+Description: 
+    * Verify that the application allows the user to choose a file to save data to
+
+OS: any
+
+Preconditions: 
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Open the settings menu
+    3. Press "Chose File" button
+            * Expected result: A file explorer window is opened
+    4. Chose a ".csv" file to save data to
+            * Expected result: The file path is displayed in the settings menu
+
+.. _TST_DATALOGGER_SAVE_COLLECTED_DATA_TO_FILE:
+Test 28 : Save Collected Data to File
+--------------------------------------
+
+UID: TST.DATALOGGER.SAVE_COLLECTED_DATA_TO_FILE
+
+Description: 
+    * Verify that the application saves all collected data to a file when the “Save Data” function is triggered.
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed
+    * Test 28 is completed successfully
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+    4. Wait for some data to be collected
+    5. Open the settings menu
+    6. Press "Save Data" button
+            * Expected result: Data is saved to a file in the chosen file 
+
+Result: 
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_ENABEL_LIVE_DATA_LOGGING:
+Test 29 : Enable Live Data Logging
+--------------------------------------
+
+UID: TST.DATALOGGER.ENABEL_LIVE_DATA_LOGGING
+
+Description: 
+    * Verify that the application saves all collected data to a file when the “Live Data Logging” function is triggered.
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed
+    * Test 28 is completed successfully
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+    5. Open the settings menu
+    6. Toggle "Live Data Logging" on
+            * Expected result: Data is saved to a file in the chosen file continuously
+            * Expected result: "Save Data" and "Import data" buttons are disabled
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_IMPORT_DATA_FROM_FILE:
+Test 30 : Import Data from File
+-----------------------------------
+
+UID: TST.DATALOGGER.IMPORT_DATA_FROM_FILE
+
+Description: 
+    * Verify that the application allows the user to import data from a file
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed
+    * Test 28 is completed successfully
+    * Test 29 is completed successfully
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Open the settings menu
+    3. Press "Import Data" button
+            * Expected result: A file explorer window is opened
+    4. Chose a ".csv" file to import data from
+            * Expected result: in the channel menu a new virtual device called "Import: <file name>" is created
+            * Expected result: channel "xadc-voltage0" is available under the "Import: <file name>" device
+    5. Enable channel "xadc-voltage0" of "Import: <file name>" device 
+            * Expected result: Data from the file is displayed on the plot
+
+
+
+.. _TST_DATALOGGER_SET_MAXIMUM_CHANNEL_DATA_STORAGE:
+Test 31 : Set Maximum Channel Data Storage
+---------------------------------------------
+
+UID: TST.DATALOGGER.SET_MAXIMUM_CHANNEL_DATA_STORAGE
+
+Description: 
+    * Verify that the application allows the user to set the maximum channel data storage
+
+OS: any
+
+Preconditions: 
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Preferences
+    2. Go to "DataLoggerPlugin" tab
+    3. Change the "Maximum data stored for each monitor" from "10Mb" to "10Mb"
+            * Expected result: The maximum channel data storage is set to "10Mb"
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_SET_DATA_LOGGER_READ_INTERVAL:
+Test 32 : Set Data Logger Read Interval
+----------------------------------------
+
+UID: TST.DATALOGGER.SET_DATA_LOGGER_READ_INTERVAL
+
+Description: 
+    * Verify that the application allows the user to set the read interval
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed  
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+    4. Open Preferences
+    5. Go to "DataLoggerPlugin" tab
+    6. Change the "Read interval" from "1" to "2"
+    7. Open Data logger plugin 
+            * Expected result: Data is collected every "2" seconds instead of "1" second
+
+Result:
+    * pass / fail
+    * 1 / 0
+    * true / false
+
+.. _TST_DATALOGGER_SET_X_AXIS_DATE_TIME_FORMAT:
+Test 33 : Set X-Axis Date Time Format
+----------------------------------------
+
+UID: TST.DATALOGGER.SET_X_AXIS_DATE_TIME_FORMAT
+
+Description: 
+    * Verify that the application allows the user to set the date time format for the X Axis
+
+OS: any
+
+Preconditions: 
+    * Test 2 is passed  
+    * connect to :ref:`AdalmPluto.Emu <adalm_pluto_emu_setup>` or :ref:`AdalmPluto.Device <adalm_pluto_device_setup>`
+
+Steps:
+    1. Open Data logger plugin
+    2. Enable channel "voltage0" of "xadc" device
+    3. Press "Run" button
+    4. Open Preferences
+    5. Go to "DataLoggerPlugin" tab
+    6. Change the "Date time format" from "hh:mm:ss" to "mm:ss"
+    7. Open Data logger plugin 
+            * Expected result: X Axis displays date time in the format "mm:ss"
\ No newline at end of file