MAX32660 EVSYS Board Can't Flash #1003
Comments
|
Hi @yuval5295, have you ever been able to program the board? Or this is the error you're seeing on a first-time attempt? |
|
Hey Jake!
I have never succeeded to program the board. I just started to try run the
first example and it’s keep fail flashing.
בתאריך יום ב׳, 29 באפר׳ 2024 ב-18:35 מאת Jake Carter <
***@***.***>:
… Hi @yuval5295 <https://github.com/yuval5295>, have you ever been able to
program the board? Or this is the error you're seeing on a first-time
attempt?
—
Reply to this email directly, view it on GitHub
<#1003 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AO467GTHTA27R74UEJIUVQTY7ZSEVAVCNFSM6AAAAABG5ARPISVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOBTGA2TKMJQHE>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
|
Do you have a jumper installed on JP1 (labelled "Target VDD")? You'll need to select either 3.3V or 1.8V. Either setting should work, but you'll need to select at least one to supply power to the MAX32660 |
|
Yes I have and I put the jumper on 1.8V option.
בתאריך יום ב׳, 29 באפר׳ 2024 ב-19:42 מאת Jake Carter <
***@***.***>:
… Do you have a jumper installed on JP1 (labelled "Target VDD")?
You'll need to select either 3.3V or 1.8V. Either setting should work, but
you'll need to select at least one to supply power to the MAX32660
—
Reply to this email directly, view it on GitHub
<#1003 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AO467GVGX43SYPFVVB3LOMDY7Z2ADAVCNFSM6AAAAABG5ARPISVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOBTGE4TKMZXHE>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
|
We re-tested with a board on our side and that latest PICO firmware you're using should work. Can you run the following command from your VS Code terminal, and paste the output? It will print some additional debug info. openocd -s $MAXIM_PATH/Tools/OpenOCD/scripts -f interface/cmsis-dap.cfg -f target/max32660.cfg -c "init;reset halt" -d3The error you're getting is the generic error when there is a connection issue to the micro on the SWD port, the micro is powered off, the host PC can't find the debugger, etc. |
|
Hey!
Thank you for your reply. I send the command through terminal:
[image: image.png]
…On Mon, 29 Apr 2024 at 22:39, Jake Carter ***@***.***> wrote:
We re-tested with a board on our side and that latest PICO firmware you're
using should work.
Can you run the following command from your VS Code terminal, and paste
the output? It will print some additional debug info.
openocd -s $MAXIM_PATH/Tools/OpenOCD/scripts -f interface/cmsis-dap.cfg -f target/max32660.cfg -c "init;reset halt" -d3
The error you're getting is the generic error when there is a connection
issue to the micro on the SWD port, the micro is powered off, the host PC
can't find the debugger, etc.
—
Reply to this email directly, view it on GitHub
<#1003 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AO467GTUV2O3CA6PSU4MA73Y72OXPAVCNFSM6AAAAABG5ARPISVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOBTGUZDCOJWG4>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
|
@yuval5295 looks like the image didn't make it to the ticket from the email. Can you paste in the terminal output, or attach the image to the ticket on Github? |
|
Sure, here it is. [image: image.png]
…On Sat, 4 May 2024 at 03:47, Jake Carter ***@***.***> wrote:
@yuval5295 <https://github.com/yuval5295> looks like the image didn't
make it to the ticket from the email. Can you paste in the terminal output,
or attach the image to the ticket on Github?
—
Reply to this email directly, view it on GitHub
<#1003 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AO467GVTULP6ERL67YLZ623ZAQVYXAVCNFSM6AAAAABG5ARPISVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOJTHEZDEMRYGE>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
|
Sorry, still not showing:
Can you paste the actual terminal output? |
|
Alternatively you can run openocd -s $MAXIM_PATH/Tools/OpenOCD/scripts -f interface/cmsis-dap.cfg -f target/max32660.cfg -c "init;reset halt" -d3 > openocd_log.txt 2>&1and attach "openocd_log.txt" |
|
cfg -c "init;reset halt" -d3
Open On-Chip Debugger (Analog Devices 0.12.0-1.0.0-7) OpenOCD 0.12.0
(2023-09-27-07:53)
Licensed under GNU GPL v2
Report bugs to ***@***.***>
User : 3 3 options.c:52 configuration_output_handler(): debug_level: 3
User : 4 7 options.c:52 configuration_output_handler():
Debug: 5 8 options.c:233 add_default_dirs(): bindir=/usr/local/bin
Debug: 6 10 options.c:234 add_default_dirs():
pkgdatadir=/usr/local/share/openocd
Debug: 7 13 options.c:235 add_default_dirs():
exepath=C:/MaximSDK/Tools/OpenOCD
Debug: 8 16 options.c:236 add_default_dirs(): bin2data=../share/openocd
Debug: 9 18 configuration.c:35 add_script_search_dir(): adding
C:/Users/97254/AppData/Roaming/OpenOCD
Debug: 10 21 configuration.c:35 add_script_search_dir(): adding
C:/MaximSDK/Tools/OpenOCD/../share/openocd/site
Debug: 11 25 configuration.c:35 add_script_search_dir(): adding
C:/MaximSDK/Tools/OpenOCD/../share/openocd/scripts
Debug: 12 29 command.c:155 script_debug(): command - ocd_find
interface/cmsis-dap.cfg
User : 13 32 command.c:608 command_run_line(): embedded:startup.tcl:28:
Error: Can't find interface/cmsis-dap.cfg
in procedure 'script'
at file "embedded:startup.tcl", line 28
…On Fri, 10 May 2024 at 01:34, Jake Carter ***@***.***> wrote:
Alternatively you can run
openocd -s $MAXIM_PATH/Tools/OpenOCD/scripts -f interface/cmsis-dap.cfg -f target/max32660.cfg -c "init;reset halt" -d3 > openocd_log.txt 2>&1
and attach "openocd_log.txt"
—
Reply to this email directly, view it on GitHub
<#1003 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AO467GXGSNO6GUAWKMACZ73ZBP2XXAVCNFSM6AAAAABG5ARPISVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMBTGU2TGNBZGA>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
|
@yuval5295 are you on Windows? Sorry - I used the Linux syntax for environment variables. On Windows it should be: openocd -s %MAXIM_PATH%/Tools/OpenOCD/scripts -f interface/cmsis-dap.cfg -f target/max32660.cfg -c "init;reset halt" -d3 > openocd_log.txt 2>&1( |
|
Hellp Jack!
it seems nothing printed on the command line after I sent this command but
it makes D1 blink green light fast (which not before I send it).
What should I do next?
Thanks!
Yuval.
…On Tue, 14 May 2024 at 00:32, Jake Carter ***@***.***> wrote:
@yuval5295 <https://github.com/yuval5295> are you on Windows? Sorry - I
used the Linux syntax for environment variables. On Windows it should be:
openocd -s %MAXIM_PATH%/Tools/OpenOCD/scripts -f interface/cmsis-dap.cfg -f target/max32660.cfg -c "init;reset halt" -d3 > openocd_log.txt 2>&1
(%MAXIM_PATH% instead of $MAXIM_PATH)
—
Reply to this email directly, view it on GitHub
<#1003 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AO467GQLEDONHOJ2AKMOHFTZCEWQDAVCNFSM6AAAAABG5ARPISVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMBYHAZTOMJSG4>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
|
Hi @yuval5295, That actually means that the command has successfully connected to the MAX32660. The OpenOCD server has launched and is waiting for a GDB client connection. Essentially it means that the debugger is working properly with the command. This means that there could be some problem specific to the VS Code setup. Have you set Please copy/paste the entire contents of your settings.json file here as well. |
|
Hello Jake!
Great news, you are totally right. the problem was the MAXIM_PATH I set, by
accident I put two // instead of one!
Thank you so much for your help and I'm sorry to bother you with such
stupid mistake.
Also I wanted to ask, can you tell me what should I check if I can't see
the prints on VS terminal? I used PuTTy instead but it seems that VS
Terminal should work as well.
Thank you again,
Yuval.
…On Wed, 5 Jun 2024 at 02:18, Jake Carter ***@***.***> wrote:
Hi @yuval5295 <https://github.com/yuval5295>,
That actually means that the command has successfully connected to the
MAX32660. The OpenOCD server has launched and is waiting for a GDB client
connection. Essentially it means that the debugger is working properly with
the command.
This means that there could be some problem specific to the VS Code setup.
Have you set MAXIM_PATH correctly in your user settings.json file? See
here
<https://analogdevicesinc.github.io/msdk//USERGUIDE/#getting-started-with-visual-studio-code>
Please copy/paste the entire contents of your settings.json file here as
well.
—
Reply to this email directly, view it on GitHub
<#1003 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AO467GX7YWL23KSZX6MYS3TZFZDMZAVCNFSM6AAAAABG5ARPISVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNBYGU3DKNRRG4>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
|
Hey, no problem at all. You can use the Serial Monitor extension. This is what I use. Just be aware it has a small quirk - it will send a special serial command to reset the micro when you connect to the serial port... This can make debugging a bit strange if you're not aware of it. It's why I have not officially recommended it in the User Guide. But the extension otherwise works very well. |
|
I will go ahead and close this out, but let me know if there's anything else I can help with. |
Hey,
I was running Hello_World example on it But I can't flash my board, it is giving the error:
Remote communication error. Target disconnected.:
I am using VS (Eclipse made me too much troubles) and unfortunately I had never succeed to flash it.
I did all the instructions mentioned on issue #883 step by step - updated the adapter firmware and erase but still no success.
this is my details on DAPALINK:
Unique ID: 04211702bfb8038600000000000000000000000097969906
HIC ID: 97969906
Auto Reset: 0
Automation allowed: 1
Overflow detection: 0
Incompatible image detection: 0
Page erasing: 1
Daplink Mode: Interface
Interface Version: 0256
Git SHA: 34fe95d79afeba62ef097774ecc609ef8c2b74ea
Local Mods: 1
USB Interfaces: MSD, CDC, HID, WebUSB
Interface CRC: 0xd7617efe
Remount count: 0
URL: http://www.maximintegrated.com/max32660
this is what written on terminal:
looking forward for any help :)
The text was updated successfully, but these errors were encountered: