diff --git a/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.cproject b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.cproject new file mode 100644 index 0000000000..d3ed5521b1 --- /dev/null +++ b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.cproject @@ -0,0 +1,86 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.project b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.project new file mode 100644 index 0000000000..bc695b2bb1 --- /dev/null +++ b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.project @@ -0,0 +1,26 @@ + + + msc_ext_flash + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + diff --git a/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.settings/language.settings.xml b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.settings/language.settings.xml new file mode 100644 index 0000000000..d32717b6f3 --- /dev/null +++ b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.settings/language.settings.xml @@ -0,0 +1,15 @@ + + + + + + + + + + + + + + + diff --git a/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.settings/org.eclipse.cdt.codan.core.prefs b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.settings/org.eclipse.cdt.codan.core.prefs new file mode 100644 index 0000000000..59c0b37ba7 --- /dev/null +++ b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.settings/org.eclipse.cdt.codan.core.prefs @@ -0,0 +1,93 @@ +eclipse.preferences.version=1 +org.eclipse.cdt.codan.checkers.errnoreturn=Warning +org.eclipse.cdt.codan.checkers.errnoreturn.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"No return\\")",implicit\=>false} +org.eclipse.cdt.codan.checkers.errreturnvalue=Error +org.eclipse.cdt.codan.checkers.errreturnvalue.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Unused return value\\")"} +org.eclipse.cdt.codan.checkers.nocommentinside=-Error +org.eclipse.cdt.codan.checkers.nocommentinside.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Nesting comments\\")"} +org.eclipse.cdt.codan.checkers.nolinecomment=-Error +org.eclipse.cdt.codan.checkers.nolinecomment.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Line comments\\")"} +org.eclipse.cdt.codan.checkers.noreturn=Error +org.eclipse.cdt.codan.checkers.noreturn.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"No return value\\")",implicit\=>false} +org.eclipse.cdt.codan.internal.checkers.AbstractClassCreation=Error +org.eclipse.cdt.codan.internal.checkers.AbstractClassCreation.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Abstract class cannot be instantiated\\")"} +org.eclipse.cdt.codan.internal.checkers.AmbiguousProblem=Error +org.eclipse.cdt.codan.internal.checkers.AmbiguousProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Ambiguous problem\\")"} +org.eclipse.cdt.codan.internal.checkers.AssignmentInConditionProblem=Warning +org.eclipse.cdt.codan.internal.checkers.AssignmentInConditionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Assignment in condition\\")"} +org.eclipse.cdt.codan.internal.checkers.AssignmentToItselfProblem=Error +org.eclipse.cdt.codan.internal.checkers.AssignmentToItselfProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Assignment to itself\\")"} +org.eclipse.cdt.codan.internal.checkers.CStyleCastProblem=-Warning +org.eclipse.cdt.codan.internal.checkers.CStyleCastProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"C-Style cast instead of C++ cast\\")"} +org.eclipse.cdt.codan.internal.checkers.CaseBreakProblem=Warning +org.eclipse.cdt.codan.internal.checkers.CaseBreakProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"No break at end of case\\")",no_break_comment\=>"no break",last_case_param\=>false,empty_case_param\=>false,enable_fallthrough_quickfix_param\=>false} +org.eclipse.cdt.codan.internal.checkers.CatchByReference=Warning +org.eclipse.cdt.codan.internal.checkers.CatchByReference.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Catching by reference is recommended\\")",unknown\=>false,exceptions\=>()} +org.eclipse.cdt.codan.internal.checkers.CircularReferenceProblem=Error +org.eclipse.cdt.codan.internal.checkers.CircularReferenceProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Circular inheritance\\")"} +org.eclipse.cdt.codan.internal.checkers.ClassMembersInitialization=Warning +org.eclipse.cdt.codan.internal.checkers.ClassMembersInitialization.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Class members should be properly initialized\\")",skip\=>true} +org.eclipse.cdt.codan.internal.checkers.CopyrightProblem=-Warning +org.eclipse.cdt.codan.internal.checkers.CopyrightProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Lack of copyright information\\")",regex\=>".*Copyright.*"} +org.eclipse.cdt.codan.internal.checkers.DecltypeAutoProblem=Error +org.eclipse.cdt.codan.internal.checkers.DecltypeAutoProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Invalid 'decltype(auto)' specifier\\")"} +org.eclipse.cdt.codan.internal.checkers.FieldResolutionProblem=Error +org.eclipse.cdt.codan.internal.checkers.FieldResolutionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Field cannot be resolved\\")"} +org.eclipse.cdt.codan.internal.checkers.FunctionResolutionProblem=Error +org.eclipse.cdt.codan.internal.checkers.FunctionResolutionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Function cannot be resolved\\")"} +org.eclipse.cdt.codan.internal.checkers.GotoStatementProblem=-Warning +org.eclipse.cdt.codan.internal.checkers.GotoStatementProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Goto statement used\\")"} +org.eclipse.cdt.codan.internal.checkers.InvalidArguments=Error +org.eclipse.cdt.codan.internal.checkers.InvalidArguments.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Invalid arguments\\")"} +org.eclipse.cdt.codan.internal.checkers.InvalidTemplateArgumentsProblem=Error +org.eclipse.cdt.codan.internal.checkers.InvalidTemplateArgumentsProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Invalid template argument\\")"} +org.eclipse.cdt.codan.internal.checkers.LabelStatementNotFoundProblem=Error +org.eclipse.cdt.codan.internal.checkers.LabelStatementNotFoundProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Label statement not found\\")"} +org.eclipse.cdt.codan.internal.checkers.MemberDeclarationNotFoundProblem=Error +org.eclipse.cdt.codan.internal.checkers.MemberDeclarationNotFoundProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Member declaration not found\\")"} +org.eclipse.cdt.codan.internal.checkers.MethodResolutionProblem=Error +org.eclipse.cdt.codan.internal.checkers.MethodResolutionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Method cannot be resolved\\")"} +org.eclipse.cdt.codan.internal.checkers.MissCaseProblem=-Warning +org.eclipse.cdt.codan.internal.checkers.MissCaseProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Missing cases in switch\\")"} +org.eclipse.cdt.codan.internal.checkers.MissDefaultProblem=-Warning +org.eclipse.cdt.codan.internal.checkers.MissDefaultProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Missing default in switch\\")",defaultWithAllEnums\=>false} +org.eclipse.cdt.codan.internal.checkers.MissReferenceProblem=-Warning +org.eclipse.cdt.codan.internal.checkers.MissReferenceProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Missing reference return value in assignment operator\\")"} +org.eclipse.cdt.codan.internal.checkers.MissSelfCheckProblem=-Warning +org.eclipse.cdt.codan.internal.checkers.MissSelfCheckProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Missing self check in assignment operator\\")"} +org.eclipse.cdt.codan.internal.checkers.NamingConventionFunctionChecker=-Info +org.eclipse.cdt.codan.internal.checkers.NamingConventionFunctionChecker.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Name convention for function\\")",pattern\=>"^[a-z]",macro\=>true,exceptions\=>()} +org.eclipse.cdt.codan.internal.checkers.NonVirtualDestructorProblem=Warning +org.eclipse.cdt.codan.internal.checkers.NonVirtualDestructorProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Class has a virtual method and non-virtual destructor\\")"} +org.eclipse.cdt.codan.internal.checkers.OverloadProblem=Error +org.eclipse.cdt.codan.internal.checkers.OverloadProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Invalid overload\\")"} +org.eclipse.cdt.codan.internal.checkers.RedeclarationProblem=Error +org.eclipse.cdt.codan.internal.checkers.RedeclarationProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Invalid redeclaration\\")"} +org.eclipse.cdt.codan.internal.checkers.RedefinitionProblem=Error +org.eclipse.cdt.codan.internal.checkers.RedefinitionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Invalid redefinition\\")"} +org.eclipse.cdt.codan.internal.checkers.ReturnStyleProblem=-Warning +org.eclipse.cdt.codan.internal.checkers.ReturnStyleProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Return with parenthesis\\")"} +org.eclipse.cdt.codan.internal.checkers.ScanfFormatStringSecurityProblem=-Warning +org.eclipse.cdt.codan.internal.checkers.ScanfFormatStringSecurityProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Format String Vulnerability\\")"} +org.eclipse.cdt.codan.internal.checkers.StatementHasNoEffectProblem=Warning +org.eclipse.cdt.codan.internal.checkers.StatementHasNoEffectProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Statement has no effect\\")",macro\=>true,exceptions\=>()} +org.eclipse.cdt.codan.internal.checkers.SuggestedParenthesisProblem=Warning +org.eclipse.cdt.codan.internal.checkers.SuggestedParenthesisProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Suggested parenthesis around expression\\")",paramNot\=>false} +org.eclipse.cdt.codan.internal.checkers.SuspiciousSemicolonProblem=Warning +org.eclipse.cdt.codan.internal.checkers.SuspiciousSemicolonProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Suspicious semicolon\\")",else\=>false,afterelse\=>false} +org.eclipse.cdt.codan.internal.checkers.TypeResolutionProblem=Error +org.eclipse.cdt.codan.internal.checkers.TypeResolutionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Type cannot be resolved\\")"} +org.eclipse.cdt.codan.internal.checkers.UnusedFunctionDeclarationProblem=Warning +org.eclipse.cdt.codan.internal.checkers.UnusedFunctionDeclarationProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Unused function declaration\\")",macro\=>true} +org.eclipse.cdt.codan.internal.checkers.UnusedStaticFunctionProblem=Warning +org.eclipse.cdt.codan.internal.checkers.UnusedStaticFunctionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Unused static function\\")",macro\=>true} +org.eclipse.cdt.codan.internal.checkers.UnusedVariableDeclarationProblem=Warning +org.eclipse.cdt.codan.internal.checkers.UnusedVariableDeclarationProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Unused variable declaration in file scope\\")",macro\=>true,exceptions\=>("@(\#)","$Id")} +org.eclipse.cdt.codan.internal.checkers.UsingInHeaderProblem=-Warning +org.eclipse.cdt.codan.internal.checkers.UsingInHeaderProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Using directive in header\\")"} +org.eclipse.cdt.codan.internal.checkers.VariableResolutionProblem=Error +org.eclipse.cdt.codan.internal.checkers.VariableResolutionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Symbol is not resolved\\")"} +org.eclipse.cdt.codan.internal.checkers.VirtualMethodCallProblem=-Error +org.eclipse.cdt.codan.internal.checkers.VirtualMethodCallProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Virtual method call in constructor/destructor\\")"} +org.eclipse.cdt.qt.core.qtproblem=Warning +org.eclipse.cdt.qt.core.qtproblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>false,RUN_ON_INC_BUILD\=>false,RUN_ON_FILE_OPEN\=>true,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>null} diff --git a/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.settings/org.eclipse.cdt.core.prefs b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.settings/org.eclipse.cdt.core.prefs new file mode 100644 index 0000000000..d3d72624ab --- /dev/null +++ b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.settings/org.eclipse.cdt.core.prefs @@ -0,0 +1,15 @@ +eclipse.preferences.version=1 +environment/project/cdt.managedbuild.toolchain.gnu.cross.base.1028364529/BOARD/delimiter=; +environment/project/cdt.managedbuild.toolchain.gnu.cross.base.1028364529/BOARD/operation=append +environment/project/cdt.managedbuild.toolchain.gnu.cross.base.1028364529/BOARD/value=EvKit_V1 +environment/project/cdt.managedbuild.toolchain.gnu.cross.base.1028364529/GCC_PREFIX/delimiter=; +environment/project/cdt.managedbuild.toolchain.gnu.cross.base.1028364529/GCC_PREFIX/operation=replace +environment/project/cdt.managedbuild.toolchain.gnu.cross.base.1028364529/GCC_PREFIX/value=arm-none-eabi- +environment/project/cdt.managedbuild.toolchain.gnu.cross.base.1028364529/PROJECT/delimiter=; +environment/project/cdt.managedbuild.toolchain.gnu.cross.base.1028364529/PROJECT/operation=append +environment/project/cdt.managedbuild.toolchain.gnu.cross.base.1028364529/PROJECT/value=msc_ext_flash +environment/project/cdt.managedbuild.toolchain.gnu.cross.base.1028364529/TARGET/delimiter=; +environment/project/cdt.managedbuild.toolchain.gnu.cross.base.1028364529/TARGET/operation=append +environment/project/cdt.managedbuild.toolchain.gnu.cross.base.1028364529/TARGET/value=MAX32690 +environment/project/cdt.managedbuild.toolchain.gnu.cross.base.1028364529/append=true +environment/project/cdt.managedbuild.toolchain.gnu.cross.base.1028364529/appendContributed=true diff --git a/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.vscode/README.md b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.vscode/README.md new file mode 100644 index 0000000000..5b355bd51c --- /dev/null +++ b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.vscode/README.md @@ -0,0 +1,47 @@ +# VSCode-Maxim + +_(If you're viewing this document from within Visual Studio Code you can press `CTRL+SHIFT+V` to open a Markdown preview window.)_ + +## Quick Links + +* [MSDK User Guide](https://analogdevicesinc.github.io/msdk/USERGUIDE/) +* [VSCode-Maxim Github](https://github.com/analogdevicesinc/VSCode-Maxim) + +## Introduction + +VSCode-Maxim is a set of [Visual Studio Code](https://code.visualstudio.com/) project configurations and utilities for enabling embedded development for [Analog Device's MSDK](https://github.com/analogdevicesinc/msdk) and the [MAX32xxx/MAX78xxx microcontrollers](https://www.analog.com/en/product-category/microcontrollers.html). + +The following features are supported: + +* Code editing with intellisense down to the register level +* Code compilation with the ability to easily re-target a project for different microcontrollers and boards +* Flashing programs +* GUI and command-line debugging + +## Dependencies + +* [Visual Studio Code](https://code.visualstudio.com/) + * [C/C++ VSCode Extension](https://marketplace.visualstudio.com/items?itemName=ms-vscode.cpptools) + * [Cortex-Debug Extension](https://marketplace.visualstudio.com/items?itemName=marus25.cortex-debug) +* [Analog Devices MSDK](https://analogdevicesinc.github.io/msdk/) + +## Installation + +Install the MSDK, then set `"MAXIM_PATH"` in your _user_ VS Code settings. + +See [Getting Started with Visual Studio Code](https://analogdevicesinc.github.io/msdk/USERGUIDE/#getting-started-with-visual-studio-code) in the MSDK User Guide for detailed instructions. + +## Usage + +See the [MSDK User Guide](https://analogdevicesinc.github.io/msdk/USERGUIDE/#visual-studio-code) for detailed usage info. + +## Issue Tracker + +Bug reports, feature requests, and contributions are welcome via the [issues](https://github.com/analogdevicesinc/VSCode-Maxim/issues) tracker on Github. + +New issues should contain _at minimum_ the following information: + +* Visual Studio Code version #s (see `Help -> About`) +* C/C++ Extension version # +* Target microcontroller and evaluation platform +* The projects `.vscode` folder and `Makefile` (where applicable). Standard compression formats such as `.zip`, `.rar`, `.tar.gz`, etc. are all acceptable. diff --git a/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.vscode/c_cpp_properties.json b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.vscode/c_cpp_properties.json new file mode 100644 index 0000000000..dfbed47b58 --- /dev/null +++ b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.vscode/c_cpp_properties.json @@ -0,0 +1,53 @@ +{ + "configurations": [ + { + "name": "Win32", + "includePath": [ + "${default}" + ], + "defines": [ + "${default}" + ], + "intelliSenseMode": "gcc-arm", + "compilerPath": "${config:ARM_GCC_path}/bin/arm-none-eabi-gcc.exe", + "browse": { + "path": [ + "${default}" + ] + } + }, + { + "name": "Linux", + "includePath": [ + "${default}" + ], + "defines": [ + "${default}" + ], + "intelliSenseMode": "gcc-arm", + "compilerPath": "${config:ARM_GCC_path}/bin/arm-none-eabi-gcc", + "browse": { + "path": [ + "${default}" + ] + } + }, + { + "name": "Mac", + "includePath": [ + "${default}" + ], + "defines": [ + "${default}" + ], + "intelliSenseMode": "gcc-arm", + "compilerPath": "${config:ARM_GCC_path}/bin/arm-none-eabi-gcc", + "browse": { + "path": [ + "${default}" + ] + } + } + ], + "version": 4 +} \ No newline at end of file diff --git a/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.vscode/flash.gdb b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.vscode/flash.gdb new file mode 100644 index 0000000000..8f22801a47 --- /dev/null +++ b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.vscode/flash.gdb @@ -0,0 +1,17 @@ +define flash_m4 + set architecture armv7e-m + set remotetimeout 10 + target remote | openocd -c "gdb_port pipe;log_output flash.log" -s $arg0/scripts -f interface/$arg1 -f target/$arg2 -c "init; reset halt" + load + compare-sections + monitor reset halt +end + +define flash_m4_run + set architecture armv7e-m + set remotetimeout 10 + target remote | openocd -c "gdb_port pipe;log_output flash.log" -s $arg0/scripts -f interface/$arg1 -f target/$arg2 -c "init; reset halt" + load + compare-sections + monitor resume +end diff --git a/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.vscode/launch.json b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.vscode/launch.json new file mode 100644 index 0000000000..01fe519904 --- /dev/null +++ b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.vscode/launch.json @@ -0,0 +1,133 @@ +{ + "configurations": [ + { + "name": "Debug Arm (Cortex-debug)", + "cwd":"${workspaceRoot}", + "executable": "${workspaceFolder}/build/${config:program_file}", + "loadFiles": ["${workspaceFolder}/build/${config:program_file}"], + "symbolFiles": [{ + "file": "${workspaceFolder}/build/${config:symbol_file}" + }], + "request": "launch", + "type": "cortex-debug", + "servertype": "openocd", + "linux": { + "gdbPath": "${config:ARM_GCC_path}/bin/arm-none-eabi-gdb", + "serverpath": "${config:OCD_path}/openocd", + }, + "windows": { + "gdbPath": "${config:ARM_GCC_path}/bin/arm-none-eabi-gdb.exe", + "serverpath": "${config:OCD_path}/openocd.exe", + }, + "osx": { + "gdbPath": "${config:ARM_GCC_path}/bin/arm-none-eabi-gdb", + "serverpath": "${config:OCD_path}/openocd", + }, + "searchDir": ["${config:OCD_path}/scripts"], + "configFiles": ["interface/${config:M4_OCD_interface_file}", "target/${config:M4_OCD_target_file}"], + "interface": "swd", + "runToEntryPoint": "main", + "svdFile": "${config:MAXIM_PATH}/Libraries/CMSIS/Device/Maxim/${config:target}/Include/${config:target}.svd" + }, + { + "name": "GDB (Arm M4)", + "type": "cppdbg", + "request": "launch", + "program": "${workspaceFolder}/build/${config:program_file}", + "args": [], + "stopAtEntry": true, + "cwd": "${workspaceFolder}", + "environment": [], + "externalConsole": false, + "MIMode": "gdb", + "linux": { + "miDebuggerPath": "${config:ARM_GCC_path}/bin/arm-none-eabi-gdb", + "debugServerPath": "${config:OCD_path}/openocd", + }, + "windows": { + "miDebuggerPath": "${config:ARM_GCC_path}/bin/arm-none-eabi-gdb.exe", + "debugServerPath": "${config:OCD_path}/openocd.exe", + }, + "osx": { + "miDebuggerPath": "${config:ARM_GCC_path}/bin/arm-none-eabi-gdb", + "debugServerPath": "${config:OCD_path}/bin/openocd", + }, + "logging": { + "exceptions": true, + "trace": false, + "traceResponse": false, + "engineLogging": false + }, + "miDebuggerServerAddress": "localhost:3333", + "debugServerArgs": "-s ${config:OCD_path}/scripts -f interface/${config:M4_OCD_interface_file} -f target/${config:M4_OCD_target_file} -c \"init; reset halt\"", + "serverStarted": "Info : Listening on port 3333 for gdb connections", + "filterStderr": true, + "targetArchitecture": "arm", + "customLaunchSetupCommands": [ + {"text":"-list-features"} + ], + "setupCommands": [ + { "text":"set logging overwrite on"}, + { "text":"set logging file debug-arm.log"}, + { "text":"set logging on"}, + { "text":"cd ${workspaceFolder}" }, + { "text":"exec-file build/${config:program_file}" }, + { "text":"symbol-file build/${config:symbol_file}" }, + { "text":"target remote localhost:3333" }, + { "text":"monitor reset halt" }, + { "text":"set $pc=Reset_Handler"}, + { "text":"b main" } + ] + }, + { + "name": "GDB (RISC-V)", + "type": "cppdbg", + "request": "launch", + "program": "${workspaceFolder}/buildrv/${config:program_file}", + "args": [], + "stopAtEntry": false, + "cwd": "${workspaceFolder}", + "environment": [], + "externalConsole": false, + "MIMode": "gdb", + "linux": { + "miDebuggerPath": "${config:xPack_GCC_path}/bin/riscv-none-elf-gdb", + "debugServerPath": "${config:OCD_path}/openocd", + }, + "windows": { + "miDebuggerPath": "${config:xPack_GCC_path}/bin/riscv-none-elf-gdb.exe", + "debugServerPath": "${config:OCD_path}/openocd.exe", + }, + "osx": { + "miDebuggerPath": "${config:xPack_GCC_path}/bin/riscv-none-elf-gdb", + "debugServerPath": "${config:OCD_path}/bin/openocd", + }, + "logging": { + "exceptions": true, + "trace": false, + "traceResponse": false, + "engineLogging": false + }, + "miDebuggerServerAddress": "localhost:3334", + "debugServerArgs": "-c \"gdb_port 3334\" -s ${config:OCD_path}/scripts -f interface/${config:RV_OCD_interface_file} -f target/${config:RV_OCD_target_file}", + "serverStarted": "Info : Listening on port 3334 for gdb connections", + "filterStderr": true, + "customLaunchSetupCommands": [ + {"text":"-list-features"} + ], + "targetArchitecture": "arm", + "setupCommands": [ + { "text":"set logging overwrite on"}, + { "text":"set logging file debug-riscv.log"}, + { "text":"set logging on"}, + { "text":"cd ${workspaceFolder}" }, + { "text": "set architecture riscv:rv32", "ignoreFailures": false }, + { "text":"exec-file build/${config:program_file}", "ignoreFailures": false }, + { "text":"symbol-file buildrv/${config:symbol_file}", "ignoreFailures": false }, + { "text":"target remote localhost:3334" }, + { "text":"b main" }, + { "text": "set $pc=Reset_Handler","ignoreFailures": false } + ] + } + ] +} diff --git a/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.vscode/settings.json b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.vscode/settings.json new file mode 100644 index 0000000000..289c72d1f7 --- /dev/null +++ b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.vscode/settings.json @@ -0,0 +1,89 @@ +{ + "terminal.integrated.env.windows": { + "Path":"${config:OCD_path};${config:ARM_GCC_path}/bin;${config:xPack_GCC_path}/bin;${config:MSYS_path}/usr/bin;${config:Make_path};${env:PATH}", + "MAXIM_PATH":"${config:MAXIM_PATH}" + }, + "terminal.integrated.defaultProfile.windows": "Command Prompt", + + "terminal.integrated.env.linux": { + "PATH":"${config:OCD_path}:${config:ARM_GCC_path}/bin:${config:xPack_GCC_path}/bin:${config:Make_path}:${env:PATH}", + "MAXIM_PATH":"${config:MAXIM_PATH}" + }, + "terminal.integrated.env.osx": { + "PATH":"${config:OCD_path}/bin:${config:ARM_GCC_path}/bin:${config:xPack_GCC_path}/bin:${config:Make_path}:${env:PATH}", + "MAXIM_PATH":"${config:MAXIM_PATH}" + }, + + "target":"MAX32690", + "board":"APARD", + + "project_name":"${workspaceFolderBasename}", + + "program_file":"${config:project_name}.elf", + "symbol_file":"${config:program_file}", + + "M4_OCD_interface_file":"cmsis-dap.cfg", + "M4_OCD_target_file":"max32690.cfg", + "RV_OCD_interface_file":"ftdi/olimex-arm-usb-ocd-h.cfg", + "RV_OCD_target_file":"${config:target}_riscv.cfg", + + "v_Arm_GCC":"10.3", + "v_xPack_GCC":"12.2.0-3.1", + + "OCD_path":"${config:MAXIM_PATH}/Tools/OpenOCD", + "ARM_GCC_path":"${config:MAXIM_PATH}/Tools/GNUTools/${config:v_Arm_GCC}", + "xPack_GCC_path":"${config:MAXIM_PATH}/Tools/xPack/riscv-none-elf-gcc/${config:v_xPack_GCC}", + "Make_path":"${config:MAXIM_PATH}/Tools/GNUTools/Make", + "MSYS_path":"${config:MAXIM_PATH}/Tools/MSYS2", + + "C_Cpp.default.includePath": [ + "${workspaceFolder}", + "${workspaceFolder}/**", + "${config:MAXIM_PATH}/Libraries/Boards/${config:target}/Include", + "${config:MAXIM_PATH}/Libraries/Boards/${config:target}/${config:board}/Include", + "${config:MAXIM_PATH}/Libraries/CMSIS/Device/Maxim/${config:target}/Include", + "${config:MAXIM_PATH}/Libraries/CMSIS/Include", + "${config:ARM_GCC_path}/arm-none-eabi/include", + "${config:ARM_GCC_path}/lib/gcc/arm-none-eabi/${config:v_Arm_GCC}/include", + "${config:MAXIM_PATH}/Libraries/PeriphDrivers/Include/${config:target}", + "${config:MAXIM_PATH}/Libraries/MiscDrivers/Camera", + "${config:MAXIM_PATH}/Libraries/MiscDrivers/Display", + "${config:MAXIM_PATH}/Libraries/MiscDrivers/Display/fonts", + "${config:MAXIM_PATH}/Libraries/MiscDrivers/ExtMemory", + "${config:MAXIM_PATH}/Libraries/MiscDrivers/LED", + "${config:MAXIM_PATH}/Libraries/MiscDrivers/PMIC", + "${config:MAXIM_PATH}/Libraries/MiscDrivers/PushButton", + "${config:MAXIM_PATH}/Libraries/MiscDrivers/Touchscreen", + "${config:MAXIM_PATH}/Libraries/MAXUSB/include", + "${config:MAXIM_PATH}/Libraries/MAXUSB/include/core", + "${config:MAXIM_PATH}/Libraries/MAXUSB/include/dgb_log", + "${config:MAXIM_PATH}/Libraries/MAXUSB/include/devclass", + "${config:MAXIM_PATH}/Libraries/MAXUSB/include/enumerate", + "${config:MAXIM_PATH}/Libraries/MAXUSB/include/core/musbhsfc" + ], + "C_Cpp.default.browse.path": [ + "${workspaceFolder}", + "${config:MAXIM_PATH}/Libraries/Boards/${config:target}/Source", + "${config:MAXIM_PATH}/Libraries/Boards/${config:target}/${config:board}/Source", + "${config:MAXIM_PATH}/Libraries/PeriphDrivers/Source", + "${config:MAXIM_PATH}/Libraries/MiscDrivers/Camera", + "${config:MAXIM_PATH}/Libraries/MiscDrivers/Display", + "${config:MAXIM_PATH}/Libraries/MiscDrivers/Display/fonts", + "${config:MAXIM_PATH}/Libraries/MiscDrivers/LED", + "${config:MAXIM_PATH}/Libraries/MiscDrivers/PMIC", + "${config:MAXIM_PATH}/Libraries/MiscDrivers/PushButton", + "${config:MAXIM_PATH}/Libraries/MiscDrivers/Touchscreen", + "${config:MAXIM_PATH}/Libraries/MiscDrivers", + "${config:MAXIM_PATH}/Libraries/MAXUSB/src/core", + "${config:MAXIM_PATH}/Libraries/MAXUSB/src/dbg_log", + "${config:MAXIM_PATH}/Libraries/MAXUSB/src/devclass", + "${config:MAXIM_PATH}/Libraries/MAXUSB/src/enumerate" + ], + "C_Cpp.default.defines": [ + + ], + "C_Cpp.default.forcedInclude": [ + "${workspaceFolder}/build/project_defines.h" + ] +} + diff --git a/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.vscode/tasks.json b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.vscode/tasks.json new file mode 100644 index 0000000000..e95445e2b3 --- /dev/null +++ b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/.vscode/tasks.json @@ -0,0 +1,115 @@ +{ + "version": "2.0.0", + "tasks": [ + { + "label": "build", + "type": "shell", + "command": "make -r -j 8 --output-sync=target --no-print-directory TARGET=${config:target} BOARD=${config:board} MAXIM_PATH=${config:MAXIM_PATH} MAKE=make PROJECT=${config:project_name}", + "osx":{ + "command": "source ~/.zshrc && make -r -j 8 --output-sync=target --no-print-directory TARGET=${config:target} BOARD=${config:board} MAXIM_PATH=${config:MAXIM_PATH} MAKE=make PROJECT=${config:project_name}" + }, + "group": "build", + "problemMatcher": [] + }, + { + "label": "clean", + "type": "shell", + "command": "make -j 8 clean --output-sync=target --no-print-directory TARGET=${config:target} BOARD=${config:board} MAXIM_PATH=${config:MAXIM_PATH} MAKE=make PROJECT=${config:project_name}", + "osx":{ + "command": "source ~/.zshrc && make -j 8 clean --output-sync=target --no-print-directory TARGET=${config:target} BOARD=${config:board} MAXIM_PATH=${config:MAXIM_PATH} MAKE=make PROJECT=${config:project_name}" + }, + "group": "build", + "problemMatcher": [] + }, + { + "label": "clean-periph", + "type": "shell", + "command": "make -j 8 distclean --output-sync=target --no-print-directory TARGET=${config:target} BOARD=${config:board} MAXIM_PATH=${config:MAXIM_PATH} MAKE=make PROJECT=${config:project_name}", + "osx":{ + "command": "source ~/.zshrc && make -j 8 distclean --output-sync=target --no-print-directory TARGET=${config:target} BOARD=${config:board} MAXIM_PATH=${config:MAXIM_PATH} MAKE=make PROJECT=${config:project_name}" + }, + "group": "build", + "problemMatcher": [] + }, + { + "label": "flash", + "type": "shell", + "command": "arm-none-eabi-gdb", + "args": [ + "--cd=\"${workspaceFolder}\"", + "--se=\"build/${config:program_file}\"", + "--symbols=build/${config:symbol_file}", + "-x=\"${workspaceFolder}/.vscode/flash.gdb\"", + "--ex=\"flash_m4 ${config:OCD_path} ${config:M4_OCD_interface_file} ${config:M4_OCD_target_file}\"", + "--batch" + ], + "group": "build", + "problemMatcher": [], + "dependsOn":["build"] + }, + { + "label": "flash & run", + "type": "shell", + "command": "arm-none-eabi-gdb", + "args": [ + "--cd=\"${workspaceFolder}\"", + "--se=\"build/${config:program_file}\"", + "--symbols=build/${config:symbol_file}", + "-x=\"${workspaceFolder}/.vscode/flash.gdb\"", + "--ex=\"flash_m4_run ${config:OCD_path} ${config:M4_OCD_interface_file} ${config:M4_OCD_target_file}\"", + "--batch" + ], + "group": "build", + "problemMatcher": [], + "dependsOn":["build"] + }, + { + "label": "erase flash", + "type": "shell", + "command": "openocd", + "args": [ + "-s", "${config:OCD_path}/scripts", + "-f", "interface/${config:M4_OCD_interface_file}", + "-f", "target/${config:M4_OCD_target_file}", + "-c", "\"init; reset halt; max32xxx mass_erase 0;\"", + "-c", "exit" + ], + "group":"build", + "problemMatcher": [], + "dependsOn":[] + }, + { + "label": "openocd (m4)", + "type": "shell", + "command": "openocd", + "args": [ + "-s", + "${config:OCD_path}/scripts", + "-f", + "interface/${config:M4_OCD_interface_file}", + "-f", + "target/${config:M4_OCD_target_file}", + "-c", + "\"init; reset halt\"" + ], + "problemMatcher": [], + "dependsOn":[] + }, + { + "label": "gdb (m4)", + "type": "shell", + "command": "arm-none-eabi-gdb", + "args": [ + "--ex=\"cd ${workspaceFolder}\"", + "--se=\"build/${config:program_file}\"", + "--symbols=build/${config:symbol_file}", + "--ex=\"target remote localhost:3333\"", + "--ex=\"monitor reset halt\"", + "--ex=\"b main\"", + "--ex=\"c\"" + ], + "problemMatcher": [], + "dependsOn":[] + }, + ] +} \ No newline at end of file diff --git a/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/Makefile b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/Makefile new file mode 100644 index 0000000000..b210c698c0 --- /dev/null +++ b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/Makefile @@ -0,0 +1,382 @@ +############################################################################### + # + # Copyright (C) 2022-2023 Maxim Integrated Products, Inc. (now owned by + # Analog Devices, Inc.), + # Copyright (C) 2023-2024 Analog Devices, Inc. + # + # Licensed under the Apache License, Version 2.0 (the "License"); + # you may not use this file except in compliance with the License. + # You may obtain a copy of the License at + # + # http://www.apache.org/licenses/LICENSE-2.0 + # + # Unless required by applicable law or agreed to in writing, software + # distributed under the License is distributed on an "AS IS" BASIS, + # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + # See the License for the specific language governing permissions and + # limitations under the License. + # + ############################################################################## + +# ** Readme! ** +# Don't edit this file! This is the core Makefile for a MaximSDK +# project. The available configuration options can be overridden +# in "project.mk", on the command-line, or with system environment +# variables. + +# See https://analogdevicesinc.github.io/msdk/USERGUIDE/#build-system +# for more detailed instructions on how to use this system. + +# The detailed instructions mentioned above are easier to read than +# this file, but the comments found in this file also outline the +# available configuration variables. This file is organized into +# sub-sections, some of which expose config variables. + + +# ******************************************************************************* +# Set the target microcontroller and board to compile for. + +# Every TARGET microcontroller has some Board Support Packages (BSPs) that are +# available for it under the MaximSDK/Libraries/Boards/TARGET folder. The BSP +# that gets selected is MaximSDK/Libraries/Boards/TARGET/BOARD. + +# Configuration Variables: +# - TARGET : Override the default target microcontroller. Ex: TARGET=MAX78000 +# - BOARD : Override the default BSP (case sensitive). Ex: BOARD=EvKit_V1, BOARD=FTHR_RevA + + +ifeq "$(TARGET)" "" +# Default target microcontroller +TARGET := MAX32690 +TARGET_UC := MAX32690 +TARGET_LC := max32690 +else +# "TARGET" has been overridden in the environment or on the command-line. +# We need to calculate an upper and lowercase version of the part number, +# because paths on Linux and MacOS are case-sensitive. +TARGET_UC := $(subst m,M,$(subst a,A,$(subst x,X,$(TARGET)))) +TARGET_LC := $(subst M,m,$(subst A,a,$(subst X,x,$(TARGET)))) +endif + +# Default board. +BOARD ?= APARD + +# ******************************************************************************* +# Locate the MaximSDK + +# This Makefile needs to know where to find the MaximSDK, and the MAXIM_PATH variable +# should point to the root directory of the MaximSDK installation. Setting this manually +# is usually only required if you're working on the command-line. + +# If MAXIM_PATH is not specified, we assume the project still lives inside of the MaximSDK +# and move up from this project's original location. + +# Configuration Variables: +# - MAXIM_PATH : Tell this Makefile where to find the MaximSDK. Ex: MAXIM_PATH=C:/MaximSDK + + +ifneq "$(MAXIM_PATH)" "" +# Sanitize MAXIM_PATH for backslashes +MAXIM_PATH := $(subst \,/,$(MAXIM_PATH)) +# Locate some other useful paths... +LIBS_DIR := $(abspath $(MAXIM_PATH)/Libraries) +CMSIS_ROOT := $(LIBS_DIR)/CMSIS +endif + +# ******************************************************************************* +# Include project Makefile. We do this after formulating TARGET, BOARD, and MAXIM_PATH +# in case project.mk needs to reference those values. However, we also include +# this as early as possible in the Makefile so that it can append to or override +# the variables below. + + +PROJECTMK ?= $(abspath ./project.mk) +include $(PROJECTMK) +$(info Loaded project.mk) +# PROJECTMK is also used by implicit rules and other libraries to add project.mk as a watch file + +# ******************************************************************************* +# Final path sanitization and re-calculation. No options here. + +ifeq "$(MAXIM_PATH)" "" +# MAXIM_PATH is still not defined... +DEPTH := ../../../../ +MAXIM_PATH := $(abspath $(DEPTH)) +$(warning Warning: MAXIM_PATH is not set! Set MAXIM_PATH in your environment or in project.mk to clear this warning.) +$(warning Warning: Attempting to use $(MAXIM_PATH) calculated from relative path) +else +# Sanitize MAXIM_PATH for backslashes +MAXIM_PATH := $(subst \,/,$(MAXIM_PATH)) +endif + +# Final recalculation of LIBS_DIR/CMSIS_ROOT +LIBS_DIR := $(abspath $(MAXIM_PATH)/Libraries) +CMSIS_ROOT := $(LIBS_DIR)/CMSIS + +# One final UC/LC check in case user set TARGET in project.mk +TARGET_UC := $(subst m,M,$(subst a,A,$(subst x,X,$(TARGET)))) +TARGET_LC := $(subst M,m,$(subst A,a,$(subst X,x,$(TARGET)))) + +export TARGET +export TARGET_UC +export TARGET_LC +export CMSIS_ROOT +# TODO: Remove dependency on exports for these variables. + +# ******************************************************************************* +# Set up search paths, and auto-detect all source code on those paths. + +# The following paths are searched by default, where "./" is the project directory. +# ./ +# |- *.h +# |- *.c +# |-include (optional) +# |- *.h +# |-src (optional) +# |- *.c + +# Configuration Variables: +# - VPATH : Tell this Makefile to search additional locations for source (.c) files. +# You should use the "+=" operator with this option. +# Ex: VPATH += your/new/path +# - IPATH : Tell this Makefile to search additional locations for header (.h) files. +# You should use the "+=" operator with this option. +# Ex: VPATH += your/new/path +# - SRCS : Tell this Makefile to explicitly add a source (.c) file to the build. +# This is really only useful if you want to add a source file that isn't +# on any VPATH, in which case you can add the full path to the file here. +# You should use the "+=" operator with this option. +# Ex: SRCS += your/specific/source/file.c +# - AUTOSEARCH : Set whether this Makefile should automatically detect .c files on +# VPATH and add them to the build. This is enabled by default. Set +# to 0 to disable. If autosearch is disabled, source files must be +# manually added to SRCS. +# Ex: AUTOSEARCH = 0 + + +# Where to find source files for this project. +VPATH += . +VPATH += src +VPATH := $(VPATH) + +# Where to find header files for this project +IPATH += . +IPATH += include +IPATH := $(IPATH) + +AUTOSEARCH ?= 1 +ifeq ($(AUTOSEARCH), 1) +# Auto-detect all C/C++ source files on VPATH +SRCS += $(wildcard $(addsuffix /*.c, $(VPATH))) +SRCS += $(wildcard $(addsuffix /*.cpp, $(VPATH))) +endif + +# Collapse SRCS before passing them on to the next stage +SRCS := $(SRCS) + +# ******************************************************************************* +# Set the output filename + +# Configuration Variables: +# - PROJECT : Override the default output filename. Ex: PROJECT=MyProject + + +# The default value creates a file named after the target micro. Ex: MAX78000.elf +PROJECT ?= $(TARGET_LC) + +# ******************************************************************************* +# Compiler options + +# Configuration Variables: +# - DEBUG : Set DEBUG=1 to build explicitly for debugging. This adds some additional +# symbols and sets -Og as the default optimization level. +# - MXC_OPTIMIZE_CFLAGS : Override the default compiler optimization level. +# Ex: MXC_OPTIMIZE_CFLAGS = -O2 +# - PROJ_CFLAGS : Add additional compiler flags to the build. +# You should use the "+=" operator with this option. +# Ex: PROJ_CFLAGS += -Wextra +# - MFLOAT_ABI : Set the floating point acceleration level. +# The only options are "hard", "soft", or "softfp". +# Ex: MFLOAT_ABI = hard +# - LINKERFILE : Override the default linkerfile. +# Ex: LINKERFILE = customlinkerfile.ld +# - LINKERPATH : Override the default search location for $(LINKERFILE) +# The default search location is $(CMSIS_ROOT)/Device/Maxim/$(TARGET_UC)/Source/GCC +# If $(LINKERFILE) cannot be found at this path, then the root project +# directory will be used as a fallback. + +# Select 'GCC' or 'IAR' compiler +ifeq "$(COMPILER)" "" +COMPILER := GCC +endif + +# Set default compiler optimization levels +ifeq "$(MAKECMDGOALS)" "release" +# Default optimization level for "release" builds (make release) +MXC_OPTIMIZE_CFLAGS ?= -O2 +DEBUG = 0 +endif + +ifeq ($(DEBUG),1) +# Optimizes for debugging as recommended +# by GNU for code-edit-debug cycles +# https://gcc.gnu.org/onlinedocs/gcc/Optimize-Options.html#Optimize-Options +MXC_OPTIMIZE_CFLAGS := -Og +endif + +# Default level if not building for release or explicitly for debug +MXC_OPTIMIZE_CFLAGS ?= -Og + +# Set compiler flags +PROJ_CFLAGS += -Wall # Enable warnings +PROJ_CFLAGS += -DMXC_ASSERT_ENABLE + +# Set hardware floating point acceleration. +# Options are: +# - hard +# - soft +# - softfp (default if MFLOAT_ABI is not set) +MFLOAT_ABI ?= softfp +# MFLOAT_ABI must be exported to other Makefiles +export MFLOAT_ABI + +# This path contains system-level intialization files for the target micro. Add to the build. +VPATH += $(CMSIS_ROOT)/Device/Maxim/$(TARGET_UC)/Source + +# ******************************************************************************* +# Secure Boot Tools (SBT) + +# This section integrates the Secure Boot Tools. It's intended for use with +# microcontrollers that have a secure bootloader. + +# Enabling SBT integration will add some special rules, such as "make sla", "make scpa", etc. + +# Configuration variables: +# SBT : Toggle SBT integration. Set to 1 to enable, or 0 +# to disable +# MAXIM_SBT_DIR : Specify the location of the SBT tool binaries. This defaults to +# Tools/SBT in the MaximSDK. The standalone SBT installer will override +# this via an environment variable. +# TARGET_SEC : Specify the part number to be passed into the SBT. This should match +# the secure variant part #. The default value will depend on TARGET. +# For example, TARGET=MAX32650 will result in TARGET_SEC=MAX32651, and +# the default selection happens in Tools/SBT/SBT-config. +# However, if there are multiple secure part #s for the target +# microcontroller this variable may need to be changed. + +SBT ?= 0 +ifeq ($(SBT), 1) +MAXIM_SBT_DIR ?= $(MAXIM_PATH)/Tools/SBT +MAXIM_SBT_DIR := $(subst \,/,$(MAXIM_SBT_DIR)) +# ^ Must sanitize path for \ on Windows, since this may come from an environment +# variable. + +export MAXIM_SBT_DIR # SBTs must have this environment variable defined to work + +# SBT-config.mk and SBT-rules.mk are included further down this Makefile. + +endif # SBT + +# ******************************************************************************* +# Default goal selection. This section allows you to override the default goal +# that will run if no targets are specified on the command-line. +# (ie. just running 'make' instead of 'make all') + +# Configuration variables: +# .DEFAULT_GOAL : Set the default goal if no targets were specified on the +# command-line +# ** "override" must be used with this variable. ** +# Ex: "override .DEFAULT_GOAL = mygoal" + +ifeq "$(.DEFAULT_GOAL)" "" +ifeq ($(SBT),1) +override .DEFAULT_GOAL := sla +else +override .DEFAULT_GOAL := all +endif +endif + +# Developer note: 'override' is used above for legacy Makefile compatibility. +# gcc.mk/gcc_riscv.mk need to hard-set 'all' internally, so this new system +# uses 'override' to come in over the top without breaking old projects. + +# It's also necessary to explicitly set MAKECMDGOALS... +ifeq "$(MAKECMDGOALS)" "" +MAKECMDGOALS:=$(.DEFAULT_GOAL) +endif + +# Enable colors when --sync-output is used. +# See https://www.gnu.org/software/make/manual/make.html#Terminal-Output (section 13.2) +ifneq ($(MAKE_TERMOUT),) +PROJ_CFLAGS += -fdiagnostics-color=always +endif + +ifneq ($(FORCE_COLOR),) +PROJ_CFLAGS += -fdiagnostics-color=always +endif + +# ******************************************************************************* +# Include SBT config. We need to do this here because it needs to know +# the current MAKECMDGOAL. +ifeq ($(SBT),1) +include $(MAXIM_PATH)/Tools/SBT/SBT-config.mk +endif + +# ******************************************************************************* +# Libraries + +# This section offers "toggle switches" to include or exclude the libraries that +# are available in the MaximSDK. Set a configuration variable to 1 to include the +# library in the build, or 0 to exclude. + +# Each library may also have its own library specific configuration variables. See +# Libraries/libs.mk for more details. + +# Configuration variables: +# - LIB_BOARD : Include the Board-Support Package (BSP) library. (Enabled by default) +# - LIB_PERIPHDRIVERS : Include the peripheral driver library. (Enabled by default) +# - LIB_CMSIS_DSP : Include the CMSIS-DSP library. +# - LIB_CORDIO : Include the Cordio BLE library +# - LIB_FCL : Include the Free Cryptographic Library (FCL) +# - LIB_FREERTOS : Include the FreeRTOS and FreeRTOS-Plus-CLI libraries +# - LIB_LC3 : Include the Low Complexity Communication Codec (LC3) library +# - LIB_LITTLEFS : Include the "little file system" (littleFS) library +# - LIB_LWIP : Include the lwIP library +# - LIB_MAXUSB : Include the MAXUSB library +# - LIB_SDHC : Include the SDHC library + +include $(LIBS_DIR)/libs.mk + + +# ******************************************************************************* +# Rules + +# Include the rules for building for this target. All other makefiles should be +# included before this one. +include $(CMSIS_ROOT)/Device/Maxim/$(TARGET_UC)/Source/$(COMPILER)/$(TARGET_LC).mk + +# Include the rules that integrate the SBTs. SBTs are a special case that must be +# include after the core gcc rules to extend them. +ifeq ($(SBT), 1) +include $(MAXIM_PATH)/Tools/SBT/SBT-rules.mk +endif + + +# Get .DEFAULT_GOAL working. +ifeq "$(MAKECMDGOALS)" "" +MAKECMDGOALS:=$(.DEFAULT_GOAL) +endif + + +all: +# Extend the functionality of the "all" recipe here + arm-none-eabi-size --format=berkeley $(BUILD_DIR)/$(PROJECT).elf + +libclean: + $(MAKE) -f ${PERIPH_DRIVER_DIR}/periphdriver.mk clean.periph + +clean: +# Extend the functionality of the "clean" recipe here + +# The rule to clean out all the build products. +distclean: clean libclean diff --git a/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/README.md b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/README.md new file mode 100644 index 0000000000..7efab027ec --- /dev/null +++ b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/README.md @@ -0,0 +1,39 @@ +## Description + +The example demonstrates the use of USB Mass Storage driver class with TinyUSB. +The storage driver is connected to the External Flash device on the AD-APARD32690-SL board. + + +## Software + +### Project Usage + +Universal instructions on building, flashing, and debugging this project can be found in the **[MSDK User Guide](https://analogdevicesinc.github.io/msdk/USERGUIDE/)**. + +### Project-Specific Build Notes + +tusb_config.h by default has logging disabled via the CFG_TUSB_DEBUG definition. +For TinyUSB console logging, set the debug level to 1, 2, or 3, with a higher value +indicating more verbose logging. + +## Required Connections + + +If using the AD-APARD32690-SL: +- Connect a USB cable between the PC and the P10 (USB-C) connector. +- Connect a MAXPICO Debug adapter to P9 (SWD Connector) +- Open a terminal application on the PC and connect to the MAXPICO's console UART at 115200, 8-N-1. + +## Expected Output + +By default, the console UART does not output any message. With CFG_TUSB_DEBUG set +to '2', the Console UART of the device will output these messages: + +``` +USBD init on controller 0, Highspeed = 1024 +sizeof(usbd_device_t) = 69 +sizeof(dcd_event_t) = 12 +sizeof(tu_fifo_t) = 12 +sizeof(tu_edpt_stream_t) = 24 +MSC init +``` diff --git a/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/main.c b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/main.c new file mode 100644 index 0000000000..804d11e144 --- /dev/null +++ b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/main.c @@ -0,0 +1,175 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * Copyright (c) 2024 Analog Devices, Inc + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include +#include +#include + +#include "bsp/board_api.h" +#include "tusb.h" +#include "led.h" +#include "pb.h" +#include "mxc_device.h" +#include "gcr_regs.h" +#include "mcr_regs.h" +#include "mxc_sys.h" +#include "Ext_Flash.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +void led_blinking_task(void); +void spixf_disk_init(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); + + if (board_init_after_tusb) { + board_init_after_tusb(); + } + + while (1) { + tud_task(); // tinyusb device task + led_blinking_task(); + } +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void)remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; +} + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +void led_blinking_task(void) +{ + static uint32_t start_ms = 0; + static bool led_state = false; + + // Blink every interval ms + if (board_millis() - start_ms < blink_interval_ms) + return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} + +//------------------------------------------------------------------------------ +// Wrapper functions to bridge TinyUSB BSP with MSDK BSP +//------------------------------------------------------------------------------ +void board_init(void) +{ + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + + MXC_SYS_ClockSourceEnable(MXC_SYS_CLOCK_IPO); + MXC_MCR->ldoctrl |= MXC_F_MCR_LDOCTRL_0P9EN; + MXC_SYS_ClockEnable(MXC_SYS_PERIPH_CLOCK_USB); + MXC_SYS_Reset_Periph(MXC_SYS_RESET0_USB); + + spixf_disk_init(); +} + +void board_led_write(bool state) +{ + if (state) { + LED_On(0); + } else { + LED_Off(0); + } +} + +uint32_t board_button_read(void) +{ + return PB_Get(0); +} + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + tud_int_handler(0); +} + +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} diff --git a/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/msc_ext_flash.c b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/msc_ext_flash.c new file mode 100644 index 0000000000..e604c4cd1c --- /dev/null +++ b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/msc_ext_flash.c @@ -0,0 +1,283 @@ +/****************************************************************************** + * + * Copyright (C) 2023-2024 Analog Devices, Inc. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ + +#include "bsp/board_api.h" +#include "tusb.h" + +#include "Ext_Flash.h" +#include "spixf.h" + +#define LBA_SIZE 512 /* Size of "logical blocks" in bytes */ +#define LBA_SIZE_SHIFT 9 /* The shift value used to convert between addresses and block numbers */ + +#if defined(EXT_FLASH_MX25) +#undef EXT_FLASH_BAUD +#define EXT_FLASH_BAUD 5000000 /* SPI clock rate to communicate with the external flash */ + +#define EXT_FLASH_SECTOR_SIZE 4096 /* Number of bytes in one sector of the external flash */ +#define EXT_FLASH_SECTOR_SIZE_SHIFT \ + 12 /* The shift value used to convert between addresses and block numbers */ +#define EXT_FLASH_NUM_SECTORS 2048 /* Total number of sectors in the external flash */ + +#define MXC_SPIXF_WIDTH Ext_Flash_DataLine_Quad /*Number of data lines*/ +#else +#error "Defined flash device not yet implemented!" +#endif + +#define LBA_PER_SECTOR (EXT_FLASH_SECTOR_SIZE >> LBA_SIZE_SHIFT) +#define INVALID_SECTOR \ + EXT_FLASH_NUM_SECTORS /* Use a sector number past the end of memory to indicate invalid */ + +#define NUM_LBA (EXT_FLASH_NUM_SECTORS * LBA_PER_SECTOR) + +static bool is_running = false; +static bool is_initialized = false; +static uint32_t active_sector_num = INVALID_SECTOR; +static uint8_t active_sector[EXT_FLASH_SECTOR_SIZE]; +static bool active_sector_dirty = false; + +void spixf_disk_init(void); +static uint32_t spixf_disk_get_sect_num(uint32_t lba); +static uint32_t spixf_disk_get_sect_addr(uint32_t lba); +static uint32_t spixf_disk_get_sect(uint32_t num); + +// Invoked to determine max LUN +uint8_t tud_msc_get_maxlun_cb(void) +{ + return 1; // single LUN +} + +// Invoked when received SCSI_CMD_INQUIRY +// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively +void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], + uint8_t product_rev[4]) +{ + (void)lun; // use same ID for both LUNs + + const char vid[] = "TinyUSB"; + const char pid[] = "Mass Storage"; + const char rev[] = "1.0"; + + memcpy(vendor_id, vid, strlen(vid)); + memcpy(product_id, pid, strlen(pid)); + memcpy(product_rev, rev, strlen(rev)); +} + +// Invoked when received Test Unit Ready command. +// return true allowing host to read/write this LUN e.g SD card inserted +bool tud_msc_test_unit_ready_cb(uint8_t lun) +{ + return is_initialized; +} + +// Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size +// Application update block count and block size +void tud_msc_capacity_cb(uint8_t lun, uint32_t *block_count, uint16_t *block_size) +{ + (void)lun; + + *block_count = NUM_LBA; + *block_size = LBA_SIZE; +} + +// Invoked when received Start Stop Unit command +// - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage +// - Start = 1 : active mode, if load_eject = 1 : load disk storage +bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject) +{ + (void)lun; + (void)power_condition; + + if (load_eject) { + if (start) { + // load disk storage + is_running = true; + } else { + // unload disk storage + //Sync dirty sector if any + spixf_disk_get_sect(INVALID_SECTOR); + is_running = false; + } + } + + return is_initialized; +} + +// Callback invoked when received READ10 command. +// Copy disk's data to buffer (up to bufsize) and return number of copied bytes. +int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void *buffer, + uint32_t bufsize) +{ + uint32_t addr; + uint32_t s_num; + + if (lba >= NUM_LBA) { + return -1; + } + + /* Convert to external flash sector number. */ + s_num = spixf_disk_get_sect_num(lba); + + if (spixf_disk_get_sect(s_num)) { + /* Failed to write/read from external flash */ + return -1; + } + + /* Get the offset into the current sector */ + addr = spixf_disk_get_sect_addr(lba); + + memcpy(buffer, active_sector + addr + offset, bufsize); + + return (int32_t)bufsize; +} + +bool tud_msc_is_writable_cb(uint8_t lun) +{ + (void)lun; + + return true; +} + +// Callback invoked when received WRITE10 command. +// Process data in buffer to disk's storage and return number of written bytes +int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t *buffer, + uint32_t bufsize) +{ + uint32_t addr; + uint32_t s_num; + + // out of ramdisk + if (lba >= NUM_LBA) { + return -1; + } + + /* Convert to external flash sector number. */ + s_num = spixf_disk_get_sect_num(lba); + + if (spixf_disk_get_sect(s_num)) { + /* Failed to write/read from external flash */ + return -1; + } + + /* Get the offset into the current sector */ + addr = spixf_disk_get_sect_addr(lba); + + memcpy(active_sector + addr + offset, buffer, bufsize); + active_sector_dirty = 1; + + return (int32_t)bufsize; +} + +// Callback invoked when received an SCSI command not in built-in list below +// - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE +// - READ10 and WRITE10 has their own callbacks (MUST not be handled here) +int32_t tud_msc_scsi_cb(uint8_t lun, uint8_t const scsi_cmd[16], void *buffer, uint16_t bufsize) +{ + void const *response = NULL; + int32_t resplen = 0; + + // most scsi handled is input + bool in_xfer = true; + + switch (scsi_cmd[0]) { + default: + // Set Sense = Invalid Command Operation + tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); + + // negative means error -> tinyusb could stall and/or response with failed status + return -1; + } + + // return resplen must not larger than bufsize + if (resplen > bufsize) + resplen = bufsize; + + if (response && (resplen > 0)) { + if (in_xfer) { + memcpy(buffer, response, (size_t)resplen); + } else { + // SCSI output + } + } + + return resplen; +} + +void spixf_disk_init() +{ + uint32_t id; + if (!is_initialized) { + Ext_Flash_Init(); + Ext_Flash_Reset(); + + if (MXC_SPIXF_WIDTH == Ext_Flash_DataLine_Quad) { + Ext_Flash_Quad(1); + } else { + Ext_Flash_Quad(0); + } + + id = Ext_Flash_ID(); + + is_initialized = true; + } +} + +static uint32_t spixf_disk_get_sect_num(uint32_t lba) +{ + /* Absolute_address = lba * LBA_SIZE */ + /* Sector_num = Absolute_address / EXT_FLASH_SECTOR_SIZE */ + /* Sector_num = lba * 512 / 4096 */ + return lba >> (EXT_FLASH_SECTOR_SIZE_SHIFT - LBA_SIZE_SHIFT); +} + +static uint32_t spixf_disk_get_sect_addr(uint32_t lba) +{ + /* eight 512 byte blocks in each sector */ + return (lba & (LBA_PER_SECTOR - 1)) << LBA_SIZE_SHIFT; +} + +static uint32_t spixf_disk_get_sect(uint32_t num) +{ + /* New sector requested? */ + if (active_sector_num != num) { + /* Is the current sector real? */ + if (active_sector_num != INVALID_SECTOR) { + /* Was it written to after it was read from memory? */ + if (active_sector_dirty) { + /* Erase the old data. */ + Ext_Flash_Erase(active_sector_num << EXT_FLASH_SECTOR_SIZE_SHIFT, + Ext_Flash_Erase_4K); + /* Write the new */ + Ext_Flash_Program_Page(active_sector_num << EXT_FLASH_SECTOR_SIZE_SHIFT, + active_sector, EXT_FLASH_SECTOR_SIZE, MXC_SPIXF_WIDTH); + /* Mark data as clean */ + active_sector_dirty = false; + } + } + + /* Requesting a new valid sector? */ + if (num != INVALID_SECTOR) { + Ext_Flash_Read(num << EXT_FLASH_SECTOR_SIZE_SHIFT, active_sector, EXT_FLASH_SECTOR_SIZE, + MXC_SPIXF_WIDTH); + active_sector_dirty = false; + active_sector_num = num; + } + } + + return 0; +} diff --git a/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/msc_ext_flash.launch b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/msc_ext_flash.launch new file mode 100644 index 0000000000..2c69317c25 --- /dev/null +++ b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/msc_ext_flash.launch @@ -0,0 +1,62 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/project.mk b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/project.mk new file mode 100644 index 0000000000..b23b3de691 --- /dev/null +++ b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/project.mk @@ -0,0 +1,22 @@ +# This file can be used to set build configuration +# variables. These variables are defined in a file called +# "Makefile" that is located next to this one. + +# For instructions on how to use this system, see +# https://analogdevicesinc.github.io/msdk/USERGUIDE/#build-system + +# ********************************************************** + +# If you have secure version of MCU, set SBT=1 to generate signed binary +# For more information on how sing process works, see +# https://www.analog.com/en/education/education-library/videos/6313214207112.html +SBT=0 + +# Enable TINYUSB library +LIB_TINYUSB=1 +TINYUSB_CONFIG_DIR = ./ + +# The APARD board is the only EvKit with onboard SPIXF Flash +ifneq ($(BOARD),APARD) +$(error ERR_NOTSUPPORTED: This project is only supported for the AD-APARD32690 board) +endif diff --git a/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/tusb_config.h b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/tusb_config.h new file mode 100644 index 0000000000..2554a6586b --- /dev/null +++ b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/tusb_config.h @@ -0,0 +1,107 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef EXAMPLES_MAX32690_USB_TINYUSB_MSC_EXT_FLASH_TUSB_CONFIG_H_ +#define EXAMPLES_MAX32690_USB_TINYUSB_MSC_EXT_FLASH_TUSB_CONFIG_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_CDC 0 +#define CFG_TUD_MSC 1 +#define CFG_TUD_HID 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 0 + +// MSC Buffer size of Device Mass storage +#define CFG_TUD_MSC_EP_BUFSIZE 512 + +#ifdef __cplusplus +} +#endif + +#endif // EXAMPLES_MAX32690_USB_TINYUSB_MSC_EXT_FLASH_TUSB_CONFIG_H_ diff --git a/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/usb_descriptors.c b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/usb_descriptors.c new file mode 100644 index 0000000000..0c6bfd7fa6 --- /dev/null +++ b/Examples/MAX32690/USB/TinyUSB/msc_ext_flash/usb_descriptors.c @@ -0,0 +1,206 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "bsp/board_api.h" +#include "tusb.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) << (n)) +#define USB_PID \ + (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | _PID_MAP(MIDI, 3) | \ + _PID_MAP(VENDOR, 4)) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = 0x00, + .bDeviceSubClass = 0x00, + .bDeviceProtocol = 0x00, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 }; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const *tud_descriptor_device_cb(void) +{ + return (uint8_t const *)&desc_device; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ + +enum { ITF_NUM_MSC, ITF_NUM_TOTAL }; + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_MSC_DESC_LEN) + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || \ + CFG_TUSB_MCU == OPT_MCU_LPC40XX +// LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number +// 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ... +#define EPNUM_MSC_OUT 0x02 +#define EPNUM_MSC_IN 0x82 + +#elif CFG_TUSB_MCU == OPT_MCU_SAMG +// SAMG doesn't support a same endpoint number with different direction IN and OUT +// e.g EP1 OUT & EP1 IN cannot exist together +#define EPNUM_MSC_OUT 0x01 +#define EPNUM_MSC_IN 0x82 + +#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X +// FT9XX doesn't support a same endpoint number with different direction IN and OUT +// e.g EP1 OUT & EP1 IN cannot exist together +#define EPNUM_MSC_OUT 0x01 +#define EPNUM_MSC_IN 0x82 + +#elif CFG_TUSB_MCU == OPT_MCU_MAX32690 || CFG_TUSB_MCU == OPT_MCU_MAX32650 || \ + CFG_TUSB_MCU == OPT_MCU_MAX32666 || CFG_TUSB_MCU == OPT_MCU_MAX78002 +// MAX32 doesn't support a same endpoint number with different direction IN and OUT +// e.g EP1 OUT & EP1 IN cannot exist together +#define EPNUM_MSC_OUT 0x01 +#define EPNUM_MSC_IN 0x82 + +#else +#define EPNUM_MSC_OUT 0x01 +#define EPNUM_MSC_IN 0x81 + +#endif + +uint8_t const desc_fs_configuration[] = { + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 0, EPNUM_MSC_OUT, EPNUM_MSC_IN, 64), +}; + +#if TUD_OPT_HIGH_SPEED +uint8_t const desc_hs_configuration[] = { + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 0, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512), +}; +#endif + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const *tud_descriptor_configuration_cb(uint8_t index) +{ + (void)index; // for multiple configurations + +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; +#else + return desc_fs_configuration; +#endif +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// String Descriptor Index +enum { + STRID_LANGID = 0, + STRID_MANUFACTURER, + STRID_PRODUCT, + STRID_SERIAL, +}; + +// array of pointer to string descriptors +char const *string_desc_arr[] = { + (const char[]){ 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + NULL, // 3: Serials will use unique ID if possible +}; + +static uint16_t _desc_str[32 + 1]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void)langid; + size_t chr_count; + + switch (index) { + case STRID_LANGID: + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + break; + + case STRID_SERIAL: + chr_count = board_usb_get_serial(_desc_str + 1, 32); + break; + + default: + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) + return NULL; + + const char *str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type + if (chr_count > max_count) + chr_count = max_count; + + // Convert ASCII string into UTF-16 + for (size_t i = 0; i < chr_count; i++) { + _desc_str[1 + i] = str[i]; + } + break; + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (uint16_t)((TUSB_DESC_STRING << 8) | (2 * chr_count + 2)); + + return _desc_str; +} diff --git a/Libraries/Boards/MAX32690/APARD/Source/board.c b/Libraries/Boards/MAX32690/APARD/Source/board.c index 0889bad344..249e68aef6 100644 --- a/Libraries/Boards/MAX32690/APARD/Source/board.c +++ b/Libraries/Boards/MAX32690/APARD/Source/board.c @@ -85,7 +85,14 @@ __weak void GPIO2_IRQHandler(void) /******************************************************************************/ static int ext_flash_board_init(void) { - return MXC_SPIXF_Init(0, EXT_FLASH_BAUD); + int err; + + err = MXC_SPIXF_Init(0x0B, EXT_FLASH_BAUD); + + if (err == E_NO_ERROR) { + MXC_SPIXF_Enable(); + } + return err; } /******************************************************************************/ diff --git a/Libraries/PeriphDrivers/Source/SPIXF/spixf_me18.c b/Libraries/PeriphDrivers/Source/SPIXF/spixf_me18.c index 361429a705..6c295cb011 100644 --- a/Libraries/PeriphDrivers/Source/SPIXF/spixf_me18.c +++ b/Libraries/PeriphDrivers/Source/SPIXF/spixf_me18.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Copyright (C) 2022-2023 Maxim Integrated Products, Inc. (now owned by + * Copyright (C) 2022-2023 Maxim Integrated Products, Inc. (now owned by * Analog Devices, Inc.), * Copyright (C) 2023-2024 Analog Devices, Inc. * @@ -35,6 +35,7 @@ int MXC_SPIXF_Init(uint32_t cmdval, uint32_t frequency) #ifndef MSDK_NO_GPIO_CLK_INIT MXC_SYS_ClockEnable(MXC_SYS_PERIPH_CLOCK_SPIXIP); // SPIX MXC_SYS_ClockEnable(MXC_SYS_PERIPH_CLOCK_SPIXIPC); // SPIXFC + MXC_GPIO_Config(&gpio_cfg_spixf); #endif return MXC_SPIXF_RevA_Init((mxc_spixfc_reva_regs_t *)MXC_SPIXFC,