diff --git a/projects/cn0363/Readme.md b/projects/cn0363/Readme.md index b6d853fbc3..9c0cf18c5a 100755 --- a/projects/cn0363/Readme.md +++ b/projects/cn0363/Readme.md @@ -2,7 +2,7 @@ Here are some pointers to help you: * [Board Product Page](https://www.analog.com/CN0363) - * Parts : [24-Bit, 250 kSPS, Sigma-Delta ADC with 20 µs Settling and True Rail-to-Rail Buffers](https://www.analog.com/AD7175-2) + * Parts : [AD7175-2, 24-Bit, 250 kSPS, Sigma-Delta ADC with 20 µs Settling and True Rail-to-Rail Buffers](https://www.analog.com/AD7175-2) * Project Doc: https://wiki.analog.com/resources/eval/user-guides/eval-cn0363-pmdz * HDL Doc: https://wiki.analog.com/resources/eval/user-guides/eval-cn0363-pmdz/reference_hdl * Linux Drivers: https://wiki.analog.com/resources/eval/user-guides/eval-cn0363-pmdz/software/linux/drivers diff --git a/projects/cn0363/common/cn0363_bd.tcl b/projects/cn0363/common/cn0363_bd.tcl index 2246b54482..64a3fd0b83 100644 --- a/projects/cn0363/common/cn0363_bd.tcl +++ b/projects/cn0363/common/cn0363_bd.tcl @@ -3,6 +3,10 @@ ### SPDX short identifier: ADIBSD ############################################################################### +source $ad_hdl_dir/library/spi_engine/scripts/spi_engine.tcl + +create_bd_intf_port -mode Master -vlnv analog.com:interface:spi_master_rtl:1.0 spi + proc load_fir_filter_vector {filter_file} { set fp [open $filter_file r] set data [split [read $fp] "\n"] @@ -42,64 +46,32 @@ ad_ip_parameter axi_dma CONFIG.DMA_DATA_WIDTH_DEST 64 ad_ip_parameter axi_dma CONFIG.DMA_AXI_PROTOCOL_DEST 1 # Create SPI engine controller with offload -create_bd_cell -type hier spi -current_bd_instance /spi - create_bd_pin -dir I -type clk clk - create_bd_pin -dir I -type rst resetn - create_bd_pin -dir O conv_done - create_bd_pin -dir O irq - create_bd_intf_pin -mode Master -vlnv analog.com:interface:spi_master_rtl:1.0 m_spi - create_bd_intf_pin -mode Master -vlnv xilinx.com:interface:axis_rtl:1.0 M_AXIS_SAMPLE - - ad_ip_instance spi_engine_execution execution - ad_ip_instance axi_spi_engine axi - ad_ip_instance spi_engine_offload offload - ad_ip_instance spi_engine_interconnect interconnect - ad_ip_instance util_sigma_delta_spi util_sigma_delta_spi - - ad_ip_parameter execution CONFIG.NUM_OF_CS 2 - ad_ip_parameter util_sigma_delta_spi CONFIG.NUM_OF_CS 2 - ad_ip_parameter interconnect CONFIG.NUM_OF_SDI 2 - ad_ip_parameter axi CONFIG.NUM_OFFLOAD 1 - - ad_connect axi/spi_engine_offload_ctrl0 offload/spi_engine_offload_ctrl - ad_connect offload/spi_engine_ctrl interconnect/s0_ctrl - ad_connect axi/spi_engine_ctrl interconnect/s1_ctrl - ad_connect interconnect/m_ctrl execution/ctrl - ad_connect offload/offload_sdi M_AXIS_SAMPLE - - ad_connect util_sigma_delta_spi/data_ready offload/trigger - ad_connect util_sigma_delta_spi/data_ready conv_done - - ad_connect execution/active util_sigma_delta_spi/spi_active - ad_connect execution/spi util_sigma_delta_spi/s_spi - ad_connect util_sigma_delta_spi/m_spi m_spi +set data_width 8 +set async_spi_clk 0 +set num_cs 2 +set num_sdi 1 +set num_sdo 1 +set sdi_delay 1 +set echo_sclk 0 - connect_bd_net \ - [get_bd_pins clk] \ - [get_bd_pins offload/spi_clk] \ - [get_bd_pins offload/ctrl_clk] \ - [get_bd_pins execution/clk] \ - [get_bd_pins axi/s_axi_aclk] \ - [get_bd_pins axi/spi_clk] \ - [get_bd_pins interconnect/clk] \ - [get_bd_pins util_sigma_delta_spi/clk] +set hier_spi_engine spi_cn0363 - connect_bd_net \ - [get_bd_pins axi/spi_resetn] \ - [get_bd_pins offload/spi_resetn] \ - [get_bd_pins execution/resetn] \ - [get_bd_pins interconnect/resetn] \ - [get_bd_pins util_sigma_delta_spi/resetn] +spi_engine_create $hier_spi_engine $data_width $async_spi_clk $num_cs $num_sdi $num_sdo $sdi_delay $echo_sclk - connect_bd_net [get_bd_pins resetn] [get_bd_pins axi/s_axi_aresetn] - ad_connect irq axi/irq +ad_connect $sys_cpu_clk $hier_spi_engine/clk +ad_connect sys_cpu_resetn $hier_spi_engine/resetn -current_bd_instance / +ad_ip_instance util_sigma_delta_spi util_sigma_delta_spi +ad_ip_parameter util_sigma_delta_spi CONFIG.NUM_OF_CS $num_cs -create_bd_intf_port -mode Master -vlnv analog.com:interface:spi_master_rtl:1.0 spi -ad_connect spi/m_spi spi +ad_connect $hier_spi_engine/clk util_sigma_delta_spi/clk +ad_connect util_sigma_delta_spi/resetn $hier_spi_engine/resetn + +ad_connect $hier_spi_engine/m_spi util_sigma_delta_spi/s_spi +ad_connect util_sigma_delta_spi/data_ready $hier_spi_engine/trigger +ad_connect $hier_spi_engine/${hier_spi_engine}_execution/active util_sigma_delta_spi/spi_active +ad_connect util_sigma_delta_spi/m_spi spi ad_ip_instance c_counter_binary phase_gen ad_ip_instance xlslice phase_slice @@ -248,9 +220,9 @@ current_bd_instance /processing current_bd_instance / -ad_connect /spi/M_AXIS_SAMPLE /processing/S_AXIS_SAMPLE -ad_connect /spi/conv_done /processing/conv_done +ad_connect /processing/S_AXIS_SAMPLE $hier_spi_engine/M_AXIS_SAMPLE ad_connect /phase_gen/Q /processing/phase +ad_connect util_sigma_delta_spi/data_ready /processing/conv_done ad_ip_instance axi_generic_adc axi_adc ad_ip_parameter axi_adc CONFIG.NUM_OF_CHANNELS 14 @@ -259,7 +231,6 @@ ad_connect processing/overflow axi_adc/adc_dovf ad_connect axi_adc/adc_enable processing/channel_enable connect_bd_net -net $sys_cpu_clk \ - [get_bd_pins /spi/clk] \ [get_bd_pins /processing/clk] \ [get_bd_pins /axi_dma/m_dest_axi_aclk] \ [get_bd_pins /axi_dma/fifo_wr_clk] \ @@ -267,18 +238,17 @@ connect_bd_net -net $sys_cpu_clk \ [get_bd_pins /axi_adc/adc_clk] connect_bd_net -net $sys_cpu_resetn \ - [get_bd_pins /spi/resetn] \ [get_bd_pins /processing/resetn] \ [get_bd_pins /axi_dma/m_dest_axi_aresetn] ad_connect /processing/dma_wr /axi_dma/fifo_wr ad_cpu_interconnect 0x43c00000 /axi_adc -ad_cpu_interconnect 0x44a00000 /spi/axi +ad_cpu_interconnect 0x44a00000 $hier_spi_engine/${hier_spi_engine}_axi_regmap ad_cpu_interconnect 0x44a30000 /axi_dma ad_cpu_interrupt "ps-13" "mb-13" /axi_dma/irq -ad_cpu_interrupt "ps-12" "mb-12" /spi/irq +ad_cpu_interrupt "ps-12" "mb-12" $hier_spi_engine/irq ad_mem_hp2_interconnect $sys_cpu_clk sys_ps7/S_AXI_HP2 ad_mem_hp2_interconnect $sys_cpu_clk axi_dma/m_dest_axi diff --git a/projects/cn0363/common/cn0363_pmod.txt b/projects/cn0363/common/cn0363_pmod.txt new file mode 100644 index 0000000000..a740a2f266 --- /dev/null +++ b/projects/cn0363/common/cn0363_pmod.txt @@ -0,0 +1,12 @@ +Pin Port Schematic_name System_top_name IOSTANDARD Termination + +# cn0363 + +2 PMOD_1 GAIN0 gain0_o LVCMOS33 #N/A +4 PMOD_2 GAIN1 gain1_o LVCMOS33 #N/A +8 PMOD_4 EXT_LED_CLK led_clk_o LVCMOS33 #N/A +6 PMOD_3 DA_CSn spi_cs[1] LVCMOS33 #N/A +1 PMOD_7 AD_CSn spi_cs[0] LVCMOS33 #N/A +3 PMOD_8 AD_DIN spi_sdo LVCMOS33 PULLTYPE PULLUP +5 PMOD_9 AD_DOUT spi_sdi LVCMOS33 PULLTYPE PULLUP +7 PMOD_10 AD_CLK spi_sclk LVCMOS33 #N/A diff --git a/projects/cn0363/zed/Makefile b/projects/cn0363/zed/Makefile index 975a294125..dc4dd1e3d9 100644 --- a/projects/cn0363/zed/Makefile +++ b/projects/cn0363/zed/Makefile @@ -10,6 +10,7 @@ M_DEPS += ../common/cn0363_bd.tcl M_DEPS += ../../scripts/adi_pd.tcl M_DEPS += ../../common/zed/zed_system_constr.xdc M_DEPS += ../../common/zed/zed_system_bd.tcl +M_DEPS += ../../../library/spi_engine/scripts/spi_engine.tcl M_DEPS += ../../../library/common/ad_iobuf.v LIB_DEPS += axi_clkgen diff --git a/projects/cn0363/zed/system_constr.xdc b/projects/cn0363/zed/system_constr.xdc index 21fc6ed092..70ed59bee3 100644 --- a/projects/cn0363/zed/system_constr.xdc +++ b/projects/cn0363/zed/system_constr.xdc @@ -5,23 +5,11 @@ # PMOD JA -set_property PACKAGE_PIN Y11 [get_ports gain0_o] -set_property IOSTANDARD LVCMOS33 [get_ports gain0_o] -set_property PACKAGE_PIN AA11 [get_ports gain1_o] -set_property IOSTANDARD LVCMOS33 [get_ports gain1_o] -set_property PACKAGE_PIN AA9 [get_ports led_clk_o] -set_property IOSTANDARD LVCMOS33 [get_ports led_clk_o] -set_property PACKAGE_PIN Y10 [get_ports {spi_cs[1]}] -set_property IOSTANDARD LVCMOS33 [get_ports {spi_cs[1]}] - -set_property PACKAGE_PIN AB11 [get_ports {spi_cs[0]}] -set_property IOSTANDARD LVCMOS33 [get_ports {spi_cs[0]}] -set_property PACKAGE_PIN AB10 [get_ports spi_sdo] -set_property IOSTANDARD LVCMOS33 [get_ports spi_sdo] -set_property PULLUP true [get_ports spi_sdo] -set_property PACKAGE_PIN AB9 [get_ports spi_sdi] -set_property IOSTANDARD LVCMOS33 [get_ports spi_sdi] -set_property PULLUP true [get_ports spi_sdi] -set_property PACKAGE_PIN AA8 [get_ports spi_sclk] -set_property IOSTANDARD LVCMOS33 [get_ports spi_sclk] - +set_property -dict {PACKAGE_PIN Y11 IOSTANDARD LVCMOS33} [get_ports gain0_o] ; ## PMOD JA1 +set_property -dict {PACKAGE_PIN AA11 IOSTANDARD LVCMOS33} [get_ports gain1_o] ; ## PMOD JA2 +set_property -dict {PACKAGE_PIN AA9 IOSTANDARD LVCMOS33} [get_ports led_clk_o] ; ## PMOD JA4 +set_property -dict {PACKAGE_PIN Y10 IOSTANDARD LVCMOS33} [get_ports {spi_cs[1]}] ; ## PMOD JA3 +set_property -dict {PACKAGE_PIN AB11 IOSTANDARD LVCMOS33} [get_ports {spi_cs[0]}] ; ## PMOD JA7 +set_property -dict {PACKAGE_PIN AB10 IOSTANDARD LVCMOS33 PULLUP true} [get_ports spi_sdo] ; ## PMOD JA8 +set_property -dict {PACKAGE_PIN AB9 IOSTANDARD LVCMOS33 PULLUP true} [get_ports spi_sdi] ; ## PMOD JA9 +set_property -dict {PACKAGE_PIN AA8 IOSTANDARD LVCMOS33} [get_ports spi_sclk] ; ## PMOD JA10