Mention that it does not work on transparent resin on front page

[DavoudTaghawiNejad]

Hello,

the test does not work for transparent resins; in my experience and confirmed by others on the facebook page. If this is the case, it should be mentioned on the frontpage. If its not the case it should be discussed on the frontpage. Also it should be clarified, from what degree of transparency it does not work. e.G. does it work with anycubic transparent green?

[X3msnake]

yes. clear resins mostly, exception is siraya blu that does not like the test either. one way to use it with clear resins is to test 100u or use the 50u, print the slow resin test (6-60) and consider the values as if the card was a regular 2-20 No dia terça-feira, 1 de outubro de 2019, Davoud Taghawi-Nejad < [email protected]> escreveu:

…

Hello, the test does not work for transparent resins; in my experience and confirmed by others on the facebook page. If this is the case, it should be mentioned on the frontpage. If its not the case it should be discussed on the frontpage. Also it should be clarified, from what degree of transparency it does not work. e.G. does it work with anycubic transparent green? — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#16?email_source=notifications&email_token=ACUR56QTZCIOVPCOUX2W3UTQMM4PRA5CNFSM4I4ISPD2YY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HO2MXUQ>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ACUR56VBTK5JPJBSRDOGPUDQMM4PRANCNFSM4I4ISPDQ> .

-- Com os melhores cumprimentos, Vinicius Silva

[X3msnake]

by yes i mean anycubic green works No dia terça-feira, 1 de outubro de 2019, Vinicius Silva <[email protected]> escreveu:

…

yes. clear resins mostly, exception is siraya blu that does not like the test either. one way to use it with clear resins is to test 100u or use the 50u, print the slow resin test (6-60) and consider the values as if the card was a regular 2-20 No dia terça-feira, 1 de outubro de 2019, Davoud Taghawi-Nejad < ***@***.***> escreveu: > Hello, > > the test does not work for transparent resins; in my experience and > confirmed by others on the facebook page. If this is the case, it should be > mentioned on the frontpage. If its not the case it should be discussed on > the frontpage. Also it should be clarified, from what degree of > transparency it does not work. e.G. does it work with anycubic transparent > green? > > — > You are receiving this because you are subscribed to this thread. > Reply to this email directly, view it on GitHub > <#16?email_source=notifications&email_token=ACUR56QTZCIOVPCOUX2W3UTQMM4PRA5CNFSM4I4ISPD2YY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HO2MXUQ>, > or mute the thread > <https://github.com/notifications/unsubscribe-auth/ACUR56VBTK5JPJBSRDOGPUDQMM4PRANCNFSM4I4ISPDQ> > . > -- Com os melhores cumprimentos, Vinicius Silva

-- Com os melhores cumprimentos, Vinicius Silva

[wildwildwilliam]

I wish I've read this issue before I try the calibration with Siraya Blu! I was scratching my head so much on the very bad failure.

https://preview.redd.it/kb6eqvs1qn441.jpg?width=3024&format=pjpg&auto=webp&s=600912c8efb0c404fb57b4f3fcb2754bfe7fb448