Laravel Cashier (Paddle)

Introduction
Upgrading Cashier
Installation
- Paddle Sandbox
- Database Migrations
Configuration
Core Concepts
Prices
Customers
- Customer Defaults
Subscriptions
Subscription Trials
- With Payment Method Up Front
- Without Payment Method Up Front
Handling Paddle Webhooks
- Defining Webhook Event Handlers
- Verifying Webhook Signatures
Single Charges
Receipts
- Past & Upcoming Payments
Handling Failed Payments
Testing

Introduction

Laravel Cashier Paddle provides an expressive, fluent interface to Paddle's subscription billing services. It handles almost all of the boilerplate subscription billing code you are dreading. In addition to basic subscription management, Cashier can handle: coupons, swapping subscription, subscription "quantities", cancellation grace periods, and more.

While working with Cashier we recommend you also review Paddle's user guides and API documentation.

Upgrading Cashier

When upgrading to a new version of Cashier, it's important that you carefully review the upgrade guide.

Installation

First, install the Cashier package for Paddle using the Composer package manager:

composer require laravel/cashier-paddle

{note} To ensure Cashier properly handles all Paddle events, remember to set up Cashier's webhook handling.

Paddle Sandbox

During local and staging development, you should register a Paddle Sandbox account. This account will give you a sandboxed environment to test and develop your applications without making actual payments. You may use Paddle's test card numbers to simulate various payment scenarios.

After you have finished developing your application you may apply for a Paddle vendor account.

Database Migrations

The Cashier service provider registers its own database migration directory, so remember to migrate your database after installing the package. The Cashier migrations will create a new customers table. In addition, a new subscriptions table will be created to store all of your customer's subscriptions. Finally, a new receipts table will be created to store all of your application's receipt information:

php artisan migrate

If you need to overwrite the migrations that are included with Cashier, you can publish them using the vendor:publish Artisan command:

php artisan vendor:publish --tag="cashier-migrations"

If you would like to prevent Cashier's migrations from running entirely, you may use the ignoreMigrations provided by Cashier. Typically, this method should be called in the register method of your AppServiceProvider:

use Laravel\Paddle\Cashier;

/**
 * Register any application services.
 *
 * @return void
 */
public function register()
{
    Cashier::ignoreMigrations();
}

Configuration

Billable Model

Before using Cashier, you must add the Billable trait to your user model definition. This trait provides various methods to allow you to perform common billing tasks, such as creating subscriptions, applying coupons and updating payment method information:

use Laravel\Paddle\Billable;

class User extends Authenticatable
{
    use Billable;
}

If you have billable entities that are not users, you may also add the trait to those classes:

use Illuminate\Database\Eloquent\Model;
use Laravel\Paddle\Billable;

class Team extends Model
{
    use Billable;
}

API Keys

Next, you should configure your Paddle keys in your application's .env file. You can retrieve your Paddle API keys from the Paddle control panel:

PADDLE_VENDOR_ID=your-paddle-vendor-id
PADDLE_VENDOR_AUTH_CODE=your-paddle-vendor-auth-code
PADDLE_PUBLIC_KEY="your-paddle-public-key"
PADDLE_SANDBOX=true

The PADDLE_SANDBOX environment variable should be set to true when you are using Paddle's Sandbox environment. The PADDLE_SANDBOX variable should be set to false if you are deploying your application to production and are using Paddle's live vendor environment.

Paddle JS

Paddle relies on its own JavaScript library to initiate the Paddle checkout widget. You can load the JavaScript library by placing the @paddleJS Blade directive right before your application layout's closing </head> tag:

<head>
    ...

    @paddleJS
</head>

Currency Configuration

The default Cashier currency is United States Dollars (USD). You can change the default currency by defining a CASHIER_CURRENCY environment variable within your application's .env file:

CASHIER_CURRENCY=EUR

In addition to configuring Cashier's currency, you may also specify a locale to be used when formatting money values for display on invoices. Internally, Cashier utilizes PHP's NumberFormatter class to set the currency locale:

CASHIER_CURRENCY_LOCALE=nl_BE

{note} In order to use locales other than en, ensure the ext-intl PHP extension is installed and configured on your server.

Overriding Default Models

You are free to extend the models used internally by Cashier by defining your own model and extending the corresponding Cashier model:

use Laravel\Paddle\Subscription as CashierSubscription;

class Subscription extends CashierSubscription
{
    // ...
}

After defining your model, you may instruct Cashier to use your custom model via the Laravel\Paddle\Cashier class. Typically, you should inform Cashier about your custom models in the boot method of your application's App\Providers\AppServiceProvider class:

use App\Models\Cashier\Receipt;
use App\Models\Cashier\Subscription;

/**
 * Bootstrap any application services.
 *
 * @return void
 */
public function boot()
{
    Cashier::useReceiptModel(Receipt::class);
    Cashier::useSubscriptionModel(Subscription::class);
}

Core Concepts

Pay Links

Paddle lacks an extensive CRUD API to perform subscription state changes. Therefore, most interactions with Paddle are done through its checkout widget. Before we can display the checkout widget, we must generate a "pay link" using Cashier. A "pay link" will inform the checkout widget of the billing operation we wish to perform:

use App\Models\User;
use Illuminate\Http\Request;

Route::get('/user/subscribe', function (Request $request) {
    $payLink = $request->user()->newSubscription('default', $premium = 34567)
        ->returnTo(route('home'))
        ->create();

    return view('billing', ['payLink' => $payLink]);
});

Cashier includes a paddle-button Blade component. We may pass the pay link URL to this component as a "prop". When this button is clicked, Paddle's checkout widget will be displayed:

<x-paddle-button :url="$payLink" class="px-8 py-4">
    Subscribe
</x-paddle-button>

By default, this will display a button with the standard Paddle styling. You can remove all Paddle styling by adding the data-theme="none" attribute to the component:

<x-paddle-button :url="$payLink" class="px-8 py-4" data-theme="none">
    Subscribe
</x-paddle-button>

The Paddle checkout widget is asynchronous. Once the user creates or updates a subscription within the widget, Paddle will send your application webhooks so that you may properly update the subscription state in our own database. Therefore, it's important that you properly set up webhooks to accommodate for state changes from Paddle.

For more information on pay links, you may review the Paddle API documentation on pay link generation.

{note} After a subscription state change, the delay for receiving the corresponding webhook is typically minimal but you should account for this in your application by considering that your user's subscription might not be immediately available after completing the checkout.

Manually Rendering Pay Links

You may also manually render a pay link without using Laravel's built-in Blade components. To get started, generate the pay link URL as demonstrated in previous examples:

$payLink = $request->user()->newSubscription('default', $premium = 34567)
    ->returnTo(route('home'))
    ->create();

Next, simply attach the pay link URL to an a element in your HTML:

<a href="#!" class="ml-4 paddle_button" data-override="{{ $payLink }}">
    Paddle Checkout
</a>

Payments Requiring Additional Confirmation

Sometimes additional verification is required in order to confirm and process a payment. When this happens, Paddle will present a payment confirmation screen. Payment confirmation screens presented by Paddle or Cashier may be tailored to a specific bank or card issuer's payment flow and can include additional card confirmation, a temporary small charge, separate device authentication, or other forms of verification.

Inline Checkout

If you don't want to make use of Paddle's "overlay" style checkout widget, Paddle also provides the option to display the widget inline. While this approach does not allow you to adjust any of the checkout's HTML fields, it allows you to embed the widget within your application.

To make it easy for you to get started with inline checkout, Cashier includes a paddle-checkout Blade component. To get started, you should generate a pay link and pass the pay link to the component's override attribute:

<x-paddle-checkout :override="$payLink" class="w-full" />

To adjust the height of the inline checkout component, you may pass the height attribute to the Blade component:

<x-paddle-checkout :override="$payLink" class="w-full" height="500" />

Inline Checkout Without Pay Links

Alternatively, you may customize the widget with custom options instead of using a pay link:

$options = [
    'product' => $productId,
    'title' => 'Product Title',
];

<x-paddle-checkout :options="$options" class="w-full" />

Please consult Paddle's guide on Inline Checkout as well as their parameter reference for further details on the inline checkout's available options.

{note} If you would like to also use the passthrough option when specifying custom options, you should provide a key / value array as its value. Cashier will automatically handle converting the array to a JSON string. In addition, the customer_id passthrough option is reserved for internal Cashier usage.

Manually Rendering An Inline Checkout

You may also manually render an inline checkout without using Laravel's built-in Blade components. To get started, generate the pay link URL as demonstrated in previous examples.

Next, you may use Paddle.js to initialize the checkout. To keep this example simple, we will demonstrate this using Alpine.js; however, you are free to translate this example to your own frontend stack:

<div class="paddle-checkout" x-data="{}" x-init="
    Paddle.Checkout.open({
        override: {{ $payLink }},
        method: 'inline',
        frameTarget: 'paddle-checkout',
        frameInitialHeight: 366,
        frameStyle: 'width: 100%; background-color: transparent; border: none;'
    });
">
</div>

User Identification

In contrast to Stripe, Paddle users are unique across all of Paddle, not unique per Paddle account. Because of this, Paddle's API's do not currently provide a method to update a user's details such as their email address. When generating pay links, Paddle identifies users using the customer_email parameter. When creating a subscription, Paddle will try to match the user provided email to an existing Paddle user.

In light of this behavior, there are some important things to keep in mind when using Cashier and Paddle. First, you should be aware that even though subscriptions in Cashier are tied to the same application user, they could be tied to different users within Paddle's internal systems. Secondly, each subscription has its own connected payment method information and could also have different email addresses within Paddle's internal systems (depending on which email was assigned to the user when the subscription was created).

Therefore, when displaying subscriptions you should always inform the user which email address or payment method information is connected to the subscription on a per-subscription basis. Retrieving this information can be done with the following methods provided by the Laravel\Paddle\Subscription model:

$subscription = $user->subscription('default');

$subscription->paddleEmail();
$subscription->paymentMethod();
$subscription->cardBrand();
$subscription->cardLastFour();
$subscription->cardExpirationDate();

There is currently no way to modify a user's email address through the Paddle API. When a user wants to update their email address within Paddle, the only way for them to do so is to contact Paddle customer support. When communicating with Paddle, they need to provide the paddleEmail value of the subscription to assist Paddle in updating the correct user.

Prices

Paddle allows you to customize prices per currency, essentially allowing you to configure different prices for different countries. Cashier Paddle allows you to retrieve all of the prices for a given product using the productPrices method. This method accepts the product IDs of the products you wish to retrieve prices for:

use Laravel\Paddle\Cashier;

$prices = Cashier::productPrices([123, 456]);

The currency will be determined based on the IP address of the request; however, you may optionally provide a specific country to retrieve prices for:

use Laravel\Paddle\Cashier;

$prices = Cashier::productPrices([123, 456], ['customer_country' => 'BE']);

After retrieving the prices you may display them however you wish:

<ul>
    @foreach ($prices as $price)
        <li>{{ $price->product_title }} - {{ $price->price()->gross() }}</li>
    @endforeach
</ul>

You may also display the net price (excludes tax) and display the tax amount separately:

<ul>
    @foreach ($prices as $price)
        <li>{{ $price->product_title }} - {{ $price->price()->net() }} (+ {{ $price->price()->tax() }} tax)</li>
    @endforeach
</ul>

If you retrieved prices for subscription plans you can display their initial and recurring price separately:

<ul>
    @foreach ($prices as $price)
        <li>{{ $price->product_title }} - Initial: {{ $price->initialPrice()->gross() }} - Recurring: {{ $price->recurringPrice()->gross() }}</li>
    @endforeach
</ul>

For more information, check Paddle's API documentation on prices.

Customers

If a user is already a customer and you would like to display the prices that apply to that customer, you may do so by retrieving the prices directly from the customer instance:

use App\Models\User;

$prices = User::find(1)->productPrices([123, 456]);

Internally, Cashier will use the user's paddleCountry method to retrieve the prices in their currency. So, for example, a user living in the United States will see prices in USD while a user in Belgium will see prices in EUR. If no matching currency can be found the default currency of the product will be used. You can customize all prices of a product or subscription plan in the Paddle control panel.

Coupons

You may also choose to display prices after a coupon reduction. When calling the productPrices method, coupons may be passed as a comma delimited string:

use Laravel\Paddle\Cashier;

$prices = Cashier::productPrices([123, 456], [
    'coupons' => 'SUMMERSALE,20PERCENTOFF'
]);

Then, display the calculated prices using the price method:

<ul>
    @foreach ($prices as $price)
        <li>{{ $price->product_title }} - {{ $price->price()->gross() }}</li>
    @endforeach
</ul>

You may display the original listed prices (without coupon discounts) using the listPrice method:

<ul>
    @foreach ($prices as $price)
        <li>{{ $price->product_title }} - {{ $price->listPrice()->gross() }}</li>
    @endforeach
</ul>

{note} When using the prices API, Paddle only allows applying coupons to one-time purchase products and not to subscription plans.

Customers

Customer Defaults

Cashier allows you to define some useful defaults for your customers when creating pay links. Setting these defaults allow you to pre-fill a customer's email address, country, and postal code so that they can immediately move on to the payment portion of the checkout widget. You can set these defaults by overriding the following methods on your billable model:

/**
 * Get the customer's email address to associate with Paddle.
 *
 * @return string|null
 */
public function paddleEmail()
{
    return $this->email;
}

/**
 * Get the customer's country to associate with Paddle.
 *
 * This needs to be a 2 letter code. See the link below for supported countries.
 *
 * @return string|null
 * @link https://developer.paddle.com/reference/platform-parameters/supported-countries
 */
public function paddleCountry()
{
    //
}

/**
 * Get the customer's postal code to associate with Paddle.
 *
 * See the link below for countries which require this.
 *
 * @return string|null
 * @link https://developer.paddle.com/reference/platform-parameters/supported-countries#countries-requiring-postcode
 */
public function paddlePostcode()
{
    //
}

These defaults will be used for every action in Cashier that generates a pay link.

Subscriptions

Creating Subscriptions

To create a subscription, first retrieve an instance of your billable model, which typically will be an instance of App\Models\User. Once you have retrieved the model instance, you may use the newSubscription method to create the model's subscription pay link:

use Illuminate\Http\Request;

Route::get('/user/subscribe', function (Request $request) {
    $payLink = $user->newSubscription('default', $premium = 12345)
        ->returnTo(route('home'))
        ->create();

    return view('billing', ['payLink' => $payLink]);
});

The first argument passed to the newSubscription method should be the name of the subscription. If your application only offers a single subscription, you might call this default or primary. The second argument is the specific plan the user is subscribing to. This value should correspond to the plan's identifier in Paddle. The returnTo method accepts a URL that your user will be redirected to after they successfully complete the checkout.

The create method will create a pay link which you can use to generate a payment button. The payment button can be generated using the paddle-button Blade component that is included with Cashier Paddle:

<x-paddle-button :url="$payLink" class="px-8 py-4">
    Subscribe
</x-paddle-button>

After the user has finished their checkout, a subscription_created webhook will be dispatched from Paddle. Cashier will receive this webhook and setup the subscription for your customer. In order to make sure all webhooks are properly received and handled by your application, ensure you have properly setup webhook handling.

Additional Details

If you would like to specify additional customer or subscription details, you may do so by passing them as an array of key / value pairs to the create method. To learn more about the additional fields supported by Paddle, check out Paddle's documentation on generating pay links:

$payLink = $user->newSubscription('default', $monthly = 12345)
    ->returnTo(route('home'))
    ->create([
        'vat_number' => $vatNumber,
    ]);

Coupons

If you would like to apply a coupon when creating the subscription, you may use the withCoupon method:

$payLink = $user->newSubscription('default', $monthly = 12345)
    ->returnTo(route('home'))
    ->withCoupon('code')
    ->create();

Metadata

You can also pass an array of metadata using the withMetadata method:

$payLink = $user->newSubscription('default', $monthly = 12345)
    ->returnTo(route('home'))
    ->withMetadata(['key' => 'value'])
    ->create();

{note} When providing metadata, please avoid using subscription_name as a metadata key. This key is reserved for internal use by Cashier.

Checking Subscription Status

Once a user is subscribed to your application, you may check their subscription status using a variety of convenient methods. First, the subscribed method returns true if the user has an active subscription, even if the subscription is currently within its trial period:

if ($user->subscribed('default')) {
    //
}

The subscribed method also makes a great candidate for a route middleware, allowing you to filter access to routes and controllers based on the user's subscription status:

<?php

namespace App\Http\Middleware;

use Closure;

class EnsureUserIsSubscribed
{
    /**
     * Handle an incoming request.
     *
     * @param  \Illuminate\Http\Request  $request
     * @param  \Closure  $next
     * @return mixed
     */
    public function handle($request, Closure $next)
    {
        if ($request->user() && ! $request->user()->subscribed('default')) {
            // This user is not a paying customer...
            return redirect('billing');
        }

        return $next($request);
    }
}

If you would like to determine if a user is still within their trial period, you may use the onTrial method. This method can be useful for determining if you should display a warning to the user that they are still on their trial period:

if ($user->subscription('default')->onTrial()) {
    //
}

The subscribedToPlan method may be used to determine if the user is subscribed to a given plan based on a given Paddle plan ID. In this example, we will determine if the user's default subscription is actively subscribed to the monthly plan:

if ($user->subscribedToPlan($monthly = 12345, 'default')) {
    //
}

By passing an array to the subscribedToPlan method, you may determine if the user's default subscription is actively subscribed to the monthly or the yearly plan:

if ($user->subscribedToPlan([$monthly = 12345, $yearly = 54321], 'default')) {
    //
}

The recurring method may be used to determine if the user is currently subscribed and is no longer within their trial period:

if ($user->subscription('default')->recurring()) {
    //
}

Cancelled Subscription Status

To determine if the user was once an active subscriber but has cancelled their subscription, you may use the cancelled method:

if ($user->subscription('default')->cancelled()) {
    //
}

You may also determine if a user has cancelled their subscription, but are still on their "grace period" until the subscription fully expires. For example, if a user cancels a subscription on March 5th that was originally scheduled to expire on March 10th, the user is on their "grace period" until March 10th. Note that the subscribed method still returns true during this time:

if ($user->subscription('default')->onGracePeriod()) {
    //
}

To determine if the user has cancelled their subscription and is no longer within their "grace period", you may use the ended method:

if ($user->subscription('default')->ended()) {
    //
}

Past Due Status

If a payment fails for a subscription, it will be marked as past_due. When your subscription is in this state it will not be active until the customer has updated their payment information. You may determine if a subscription is past due using the pastDue method on the subscription instance:

if ($user->subscription('default')->pastDue()) {
    //
}

When a subscription is past due, you should instruct the user to update their payment information. You may configure how past due subscriptions are handled in your Paddle subscription settings.

If you would like subscriptions to still be considered active when they are past_due, you may use the keepPastDueSubscriptionsActive method provided by Cashier. Typically, this method should be called in the register method of your AppServiceProvider:

use Laravel\Paddle\Cashier;

/**
 * Register any application services.
 *
 * @return void
 */
public function register()
{
    Cashier::keepPastDueSubscriptionsActive();
}

{note} When a subscription is in a past_due state it cannot be changed until payment information has been updated. Therefore, the swap and updateQuantity methods will throw an exception when the subscription is in a past_due state.

Subscription Scopes

Most subscription states are also available as query scopes so that you may easily query your database for subscriptions that are in a given state:

// Get all active subscriptions...
$subscriptions = Subscription::query()->active()->get();

// Get all of the cancelled subscriptions for a user...
$subscriptions = $user->subscriptions()->cancelled()->get();

A complete list of available scopes is available below:

Subscription::query()->active();
Subscription::query()->onTrial();
Subscription::query()->notOnTrial();
Subscription::query()->pastDue();
Subscription::query()->recurring();
Subscription::query()->ended();
Subscription::query()->paused();
Subscription::query()->notPaused();
Subscription::query()->onPausedGracePeriod();
Subscription::query()->notOnPausedGracePeriod();
Subscription::query()->cancelled();
Subscription::query()->notCancelled();
Subscription::query()->onGracePeriod();
Subscription::query()->notOnGracePeriod();

Subscription Single Charges

Subscription single charges allow you to charge subscribers with a one-time charge on top of their subscriptions:

$response = $user->subscription('default')->charge(12.99, 'Support Add-on');

In contrast to single charges, this method will immediately charge the customer's stored payment method for the subscription. The charge amount should always be defined in the currency of the subscription.

Updating Payment Information

Paddle always saves a payment method per subscription. If you want to update the default payment method for a subscription, you should first generate a subscription "update URL" using the updateUrl method on the subscription model:

use App\Models\User;

$user = User::find(1);

$updateUrl = $user->subscription('default')->updateUrl();

Then, you may use the generated URL in combination with Cashier's provided paddle-button Blade component to allow the user to initiate the Paddle widget and update their payment information:

<x-paddle-button :url="$updateUrl" class="px-8 py-4">
    Update Card
</x-paddle-button>

When a user has finished updating their information, a subscription_updated webhook will be dispatched by Paddle and the subscription details will be updated in your application's database.

Changing Plans

After a user has subscribed to your application, they may occasionally want to change to a new subscription plan. To update the subscription plan for a user, you should pass the Paddle plan's identifier to the subscription's swap method:

use App\Models\User;

$user = User::find(1);

$user->subscription('default')->swap($premium = 34567);

If the user is on a trial, the trial period will be maintained. Additionally, if a "quantity" exists for the subscription, that quantity will also be maintained.

If you would like to swap plans and cancel any trial period the user is currently on, you may use the skipTrial method:

$user->subscription('default')
        ->skipTrial()
        ->swap($premium = 34567);

If you would like to swap plans and immediately invoice the user instead of waiting for their next billing cycle, you may use the swapAndInvoice method:

$user = User::find(1);

$user->subscription('default')->swapAndInvoice($premium = 34567);

Prorations

By default, Paddle prorates charges when swapping between plans. The noProrate method may be used to update the subscription's without prorating the charges:

$user->subscription('default')->noProrate()->swap($premium = 34567);

Subscription Quantity

Sometimes subscriptions are affected by "quantity". For example, a project management application might charge $10 per month per project. To easily increment or decrement your subscription's quantity, use the incrementQuantity and decrementQuantity methods:

$user = User::find(1);

$user->subscription('default')->incrementQuantity();

// Add five to the subscription's current quantity...
$user->subscription('default')->incrementQuantity(5);

$user->subscription('default')->decrementQuantity();

// Subtract five from the subscription's current quantity...
$user->subscription('default')->decrementQuantity(5);

Alternatively, you may set a specific quantity using the updateQuantity method:

$user->subscription('default')->updateQuantity(10);

The noProrate method may be used to update the subscription's quantity without prorating the charges:

$user->subscription('default')->noProrate()->updateQuantity(10);

Subscription Modifiers

Subscription modifiers allow you to implement metered billing or extend subscriptions with add-ons.

For example, you might want to offer a "Premium Support" add-on with your standard subscription. You can create this modifier like so:

$modifier = $user->subscription('default')->newModifier(12.99)->create();

The example above will add a $12.99 add-on to the subscription. By default, this charge will recur on every interval you have configured for the subscription. If you would like, you can add a readable description to the modifier using the modifier's description method:

$modifier = $user->subscription('default')->newModifier(12.99)
    ->description('Premium Support')
    ->create();

To illustrate how to implement metered billing using modifiers, imagine your application charges per SMS message sent by the user. First, you should create a $0 plan in your Paddle dashboard. Once the user has been subscribed to this plan, you can add modifiers representing each individual charge to the subscription:

$modifier = $user->subscription('default')->newModifier(0.99)
    ->description('New text message')
    ->oneTime()
    ->create();

As you can see, we invoked the oneTime method when creating this modifier. This method will ensure the modifier is only charged once and does not recur every billing interval.

Retrieving Modifiers

You may retrieve a list of all modifiers for a subscription via the modifiers method:

$modifiers = $user->subscription('default')->modifiers();

foreach ($modifiers as $modifier) {
    $modifier->amount(); // $0.99
    $modifier->description; // New text message.
}

Deleting Modifiers

Modifiers may be deleted by invoking the delete method on a Laravel\Paddle\Modifier instance:

$modifier->delete();

Pausing Subscriptions

To pause a subscription, call the pause method on the user's subscription:

$user->subscription('default')->pause();

When a subscription is paused, Cashier will automatically set the paused_from column in your database. This column is used to know when the paused method should begin returning true. For example, if a customer pauses a subscription on March 1st, but the subscription was not scheduled to recur until March 5th, the paused method will continue to return false until March 5th. This is done because a user is typically allowed to continue using an application until the end of their billing cycle.

You may determine if a user has paused their subscription but are still on their "grace period" using the onPausedGracePeriod method:

if ($user->subscription('default')->onPausedGracePeriod()) {
    //
}

To resume a paused a subscription, you may call the unpause method on the user's subscription:

$user->subscription('default')->unpause();

{note} A subscription cannot be modified while it is paused. If you want to swap to a different plan or update quantities you must resume the subscription first.

Cancelling Subscriptions

To cancel a subscription, call the cancel method on the user's subscription:

$user->subscription('default')->cancel();

When a subscription is cancelled, Cashier will automatically set the ends_at column in your database. This column is used to know when the subscribed method should begin returning false. For example, if a customer cancels a subscription on March 1st, but the subscription was not scheduled to end until March 5th, the subscribed method will continue to return true until March 5th. This is done because a user is typically allowed to continue using an application until the end of their billing cycle.

You may determine if a user has cancelled their subscription but are still on their "grace period" using the onGracePeriod method:

if ($user->subscription('default')->onGracePeriod()) {
    //
}

If you wish to cancel a subscription immediately, you may call the cancelNow method on the user's subscription:

$user->subscription('default')->cancelNow();

{note} Paddle's subscriptions cannot be resumed after cancellation. If your customer wishes to resume their subscription, they will have to subscribe to a new subscription.

Subscription Trials

With Payment Method Up Front

{note} While trialing and collecting payment method details up front, Paddle prevents any subscription changes such as swapping plans or updating quantities. If you want to allow a customer to swap plans during a trial the subscription must be cancelled and recreated.

If you would like to offer trial periods to your customers while still collecting payment method information up front, you should use the trialDays method when creating your subscription pay links:

use Illuminate\Http\Request;

Route::get('/user/subscribe', function (Request $request) {
    $payLink = $request->user()->newSubscription('default', $monthly = 12345)
                ->returnTo(route('home'))
                ->trialDays(10)
                ->create();

    return view('billing', ['payLink' => $payLink]);
});

This method will set the trial period ending date on the subscription record within your application's database, as well as instruct Paddle to not begin billing the customer until after this date.

{note} If the customer's subscription is not cancelled before the trial ending date they will be charged as soon as the trial expires, so you should be sure to notify your users of their trial ending date.

You may determine if the user is within their trial period using either the onTrial method of the user instance or the onTrial method of the subscription instance. The two examples below are equivalent:

if ($user->onTrial('default')) {
    //
}

if ($user->subscription('default')->onTrial()) {
    //
}

Defining Trial Days In Paddle / Cashier

You may choose to define how many trial days your plan's receive in the Paddle dashboard or always pass them explicitly using Cashier. If you choose to define your plan's trial days in Paddle you should be aware that new subscriptions, including new subscriptions for a customer that had a subscription in the past, will always receive a trial period unless you explicitly call the trialDays(0) method.

Without Payment Method Up Front

If you would like to offer trial periods without collecting the user's payment method information up front, you may set the trial_ends_at column on the customer record attached to your user to your desired trial ending date. This is typically done during user registration:

use App\Models\User;

$user = User::create([
    // ...
]);

$user->createAsCustomer([
    'trial_ends_at' => now()->addDays(10)
]);

Cashier refers to this type of trial as a "generic trial", since it is not attached to any existing subscription. The onTrial method on the User instance will return true if the current date is not past the value of trial_ends_at:

if ($user->onTrial()) {
    // User is within their trial period...
}

Once you are ready to create an actual subscription for the user, you may use the newSubscription method as usual:

use Illuminate\Http\Request;

Route::get('/user/subscribe', function (Request $request) {
    $payLink = $user->newSubscription('default', $monthly = 12345)
        ->returnTo(route('home'))
        ->create();

    return view('billing', ['payLink' => $payLink]);
});

To retrieve the user's trial ending date, you may use the trialEndsAt method. This method will return a Carbon date instance if a user is on a trial or null if they aren't. You may also pass an optional subscription name parameter if you would like to get the trial ending date for a specific subscription other than the default one:

if ($user->onTrial()) {
    $trialEndsAt = $user->trialEndsAt('main');
}

You may use the onGenericTrial method if you wish to know specifically that the user is within their "generic" trial period and has not created an actual subscription yet:

if ($user->onGenericTrial()) {
    // User is within their "generic" trial period...
}

{note} There is no way to extend or modify a trial period on a Paddle subscription after it has been created.

Handling Paddle Webhooks

Paddle can notify your application of a variety of events via webhooks. By default, a route that points to Cashier's webhook controller is registered by the Cashier service provider. This controller will handle all incoming webhook requests.

By default, this controller will automatically handle cancelling subscriptions that have too many failed charges (as defined by your Paddle subscription settings), subscription updates, and payment method changes; however, as we'll soon discover, you can extend this controller to handle any Paddle webhook event you like.

To ensure your application can handle Paddle webhooks, be sure to configure the webhook URL in the Paddle control panel. By default, Cashier's webhook controller responds to the /paddle/webhook URL path. The full list of all webhooks you should enable in the Paddle control panel are:

Subscription Created
Subscription Updated
Subscription Cancelled
Payment Succeeded
Subscription Payment Succeeded

{note} Make sure you protect incoming requests with Cashier's included webhook signature verification middleware.

Webhooks & CSRF Protection

Since Paddle webhooks need to bypass Laravel's CSRF protection, be sure to list the URI as an exception in your App\Http\Middleware\VerifyCsrfToken middleware or list the route outside of the web middleware group:

protected $except = [
    'paddle/*',
];

Defining Webhook Event Handlers

Cashier automatically handles subscription cancellation on failed charges and other common Paddle webhooks, but if you have additional webhook events you would like to handle, you should extend Cashier's WebhookController.

Your controller's method names should correspond to Cashier's controller method conventions. Specifically, methods should be prefixed with handle and the "camel case" name of the webhook you wish to handle. For example, if you wish to handle the payment_succeeded webhook, you should add a handlePaymentSucceeded method to the controller:

<?php

namespace App\Http\Controllers;

use Laravel\Paddle\Http\Controllers\WebhookController as CashierController;

class WebhookController extends CashierController
{
    /**
     * Handle the payment succeeded webhook.
     *
     * @param  array  $payload
     * @return void
     */
    public function handlePaymentSucceeded($payload)
    {
        // Handle the event...
    }
}

Next, define a route to your Cashier webhook controller within your application's routes/web.php file. This will overwrite the default route registered by Cashier's service provider:

use App\Http\Controllers\WebhookController;

Route::post('/paddle/webhook', WebhookController::class);

Cashier emits a Laravel\Paddle\Events\WebhookReceived event when a webhook is received and a Laravel\Paddle\Events\WebhookHandled event when a webhook was handled. Both events contain the full payload of the Paddle webhook.

Cashier also emit events dedicated to the type of the received webhook. In addition to the full payload from Paddle, they also contain the relevant models that were used to process the webhook such as the billable model, the subscription, or the receipt:

- `Laravel\Paddle\Events\PaymentSucceeded` - `Laravel\Paddle\Events\SubscriptionPaymentSucceeded` - `Laravel\Paddle\Events\SubscriptionCreated` - `Laravel\Paddle\Events\SubscriptionUpdated` - `Laravel\Paddle\Events\SubscriptionCancelled`

You can also override the default, built-in webhook route by defining the CASHIER_WEBHOOK environment variable in your application's .env file. This value should be the full URL to your webhook route and needs to match the URL set in your Paddle control panel:

CASHIER_WEBHOOK=https://example.com/my-paddle-webhook-url

Verifying Webhook Signatures

To secure your webhooks, you may use Paddle's webhook signatures. For convenience, Cashier automatically includes a middleware which validates that the incoming Paddle webhook request is valid.

To enable webhook verification, ensure that the PADDLE_PUBLIC_KEY environment variable is defined in your application's .env file. The public key may be retrieved from your Paddle account dashboard.

Single Charges

Simple Charge

If you would like to make a one-time charge against a customer, you may use the charge method on a billable model instance to generate a pay link for the charge. The charge method accepts the charge amount (float) as its first argument and a charge description as its second argument:

use Illuminate\Http\Request;

Route::get('/store', function (Request $request) {
    return view('store', [
        'payLink' => $user->charge(12.99, 'Action Figure')
    ]);
});

After generating the pay link, you may use Cashier's provided paddle-button Blade component to allow the user to initiate the Paddle widget and complete the charge:

<x-paddle-button :url="$payLink" class="px-8 py-4">
    Buy
</x-paddle-button>

The charge method accepts an array as its third argument, allowing you to pass any options you wish to the underlying Paddle pay link creation. Please consult the Paddle documentation to learn more about the options available to you when creating charges:

$payLink = $user->charge(12.99, 'Action Figure', [
    'custom_option' => $value,
]);

Charges happen in the currency specified in the cashier.currency configuration option. By default, this is set to USD. You may override the default currency by defining the CASHIER_CURRENCY environment variable in your application's .env file:

CASHIER_CURRENCY=EUR

You can also override prices per currency using Paddle's dynamic pricing matching system. To do so, pass an array of prices instead of a fixed amount:

$payLink = $user->charge([
    'USD:19.99',
    'EUR:15.99',
], 'Action Figure');

Charging Products

If you would like to make a one-time charge against a specific product configured within Paddle, you may use the chargeProduct method on a billable model instance to generate a pay link:

use Illuminate\Http\Request;

Route::get('/store', function (Request $request) {
    return view('store', [
        'payLink' => $request->user()->chargeProduct($productId = 123)
    ]);
});

Then, you may provide the pay link to the paddle-button component to allow the user to initialize the Paddle widget:

<x-paddle-button :url="$payLink" class="px-8 py-4">
    Buy
</x-paddle-button>

The chargeProduct method accepts an array as its second argument, allowing you to pass any options you wish to the underlying Paddle pay link creation. Please consult the Paddle documentation regarding the options that are available to you when creating charges:

$payLink = $user->chargeProduct($productId, [
    'custom_option' => $value,
]);

Refunding Orders

If you need to refund a Paddle order, you may use the refund method. This method accepts the Paddle order ID as its first argument. You may retrieve the receipts for a given billable model using the receipts method:

use App\Models\User;

$user = User::find(1);

$receipt = $user->receipts()->first();

$refundRequestId = $user->refund($receipt->order_id);

You may optionally specify a specific amount to refund as well as a reason for the refund:

$receipt = $user->receipts()->first();

$refundRequestId = $user->refund(
    $receipt->order_id, 5.00, 'Unused product time'
);

{tip} You can use the $refundRequestId as a reference for the refund when contacting Paddle support.

Receipts

You may easily retrieve an array of a billable model's receipts via the receipts property:

use App\Models\User;

$user = User::find(1);

$receipts = $user->receipts;

When listing the receipts for the customer, you may use the receipt instance's methods to display the relevant receipt information. For example, you may wish to list every receipt in a table, allowing the user to easily download any of the receipts:

<table>
    @foreach ($receipts as $receipt)
        <tr>
            <td>{{ $receipt->paid_at->toFormattedDateString() }}</td>
            <td>{{ $receipt->amount() }}</td>
            <td><a href="{{ $receipt->receipt_url }}" target="_blank">Download</a></td>
        </tr>
    @endforeach
</table>

Past & Upcoming Payments

You may use the lastPayment and nextPayment methods to retrieve and display a customer's past or upcoming payments for recurring subscriptions:

use App\Models\User;

$user = User::find(1);

$subscription = $user->subscription('default');

$lastPayment = $subscription->lastPayment();
$nextPayment = $subscription->nextPayment();

Both of these methods will return an instance of Laravel\Paddle\Payment; however, nextPayment will return null when the billing cycle has ended (such as when a subscription has been cancelled):

Next payment: {{ $nextPayment->amount() }} due on {{ $nextPayment->date()->format('d/m/Y') }}

Handling Failed Payments

Subscription payments fail for various reasons, such as expired cards or a card having insufficient funds. When this happens, we recommend that you let Paddle handle payment failures for you. Specifically, you may setup Paddle's automatic billing emails in your Paddle dashboard.

Alternatively, you can perform more precise customization by catching the subscription_payment_failed webhook and enabling the "Subscription Payment Failed" option in the Webhook settings of your Paddle dashboard:

<?php

namespace App\Http\Controllers;

use Laravel\Paddle\Http\Controllers\WebhookController as CashierController;

class WebhookController extends CashierController
{
    /**
     * Handle subscription payment failed.
     *
     * @param  array  $payload
     * @return void
     */
    public function handleSubscriptionPaymentFailed($payload)
    {
        // Handle the failed subscription payment...
    }
}

Testing

While testing, you should manually test your billing flow to make sure your integration works as expected.

For automated tests, including those executed within a CI environment, you may use Laravel's HTTP Client to fake HTTP calls made to Paddle. Although this does not test the actual responses from Paddle, it does provide a way to test your application without actually calling Paddle's API.

Files

cashier-paddle.md

Latest commit

History

cashier-paddle.md

File metadata and controls

Laravel Cashier (Paddle)

Introduction

Upgrading Cashier

Installation

Paddle Sandbox

Database Migrations

Configuration

Billable Model

API Keys

Paddle JS

Currency Configuration

Overriding Default Models

Core Concepts

Pay Links

Manually Rendering Pay Links

Payments Requiring Additional Confirmation

Inline Checkout

Inline Checkout Without Pay Links

Manually Rendering An Inline Checkout

User Identification

Prices

Customers

Coupons

Customers

Customer Defaults

Subscriptions

Creating Subscriptions

Additional Details

Coupons

Metadata

Checking Subscription Status

Cancelled Subscription Status

Past Due Status

Subscription Scopes

Subscription Single Charges

Updating Payment Information

Changing Plans

Prorations

Subscription Quantity

Subscription Modifiers

Retrieving Modifiers

Deleting Modifiers

Pausing Subscriptions

Cancelling Subscriptions

Subscription Trials

With Payment Method Up Front

Defining Trial Days In Paddle / Cashier

Without Payment Method Up Front

Handling Paddle Webhooks

Webhooks & CSRF Protection

Defining Webhook Event Handlers

Verifying Webhook Signatures

Single Charges

Simple Charge

Charging Products

Refunding Orders

Receipts

Past & Upcoming Payments

Handling Failed Payments

Testing