Skip to content

Latest commit

 

History

History
53 lines (39 loc) · 2.56 KB

info.md

File metadata and controls

53 lines (39 loc) · 2.56 KB
Raw

Home Assistant support for Miele@home connected appliances

Introduction

This project exposes Miele state information of appliances connected to a Miele user account. This is achieved by communicating with the Miele Cloud Service, which exposes both applicances connected to a Miele@home Gateway XGW3000, as well as those devices connected via WiFi Con@ct.

Prerequisite

  • A running version of Home Assistant. While earlier versions may work, the custom component has been developed and tested with version 0.76.x.
  • The requests_oauthlib library as part of your HA installation. Please install via pip3 install requests_oauthlib. For Hassbian you need to install this via :
cd /srv/
sudo chown homeassistant:homeassistant homeassistant
sudo su -s /bin/bash homeassistant
cd /srv/homeassistant
source bin/activate
pip3 install requests_oauthlib

Installation of the custom component

  • Copy the content of this repository into your custom_components folder, which is a subdirectory of your Home Assistant configuration directory. By default, this directory is located under ~/.home-assistant. The structure of the custom_components directory should look like this afterwards:
- miele
    - __init__.py
    - miele_at_home.py
    - binary_sensor.py
    - light.py
    - sensor.py
  • Enabled the new platform in your configuration.yaml:
miele:
    client_id: <your Miele ClientID>
    client_secret: <your Miele ClientSecret>
    lang: <optional. en=english, de=german>
    cache_path: <optional. where to store the cached access token>
  • Restart Home Assistant.
  • The Home Assistant Web UI will show you a UI to configure the Miele platform. Follow the instructions to log into the Miele Cloud Service. This will communicate back an authentication token that will be cached to communicate with the Cloud Service.

Done. If you follow all the instructions, the Miele integration should be up and running. All Miele devices that you can see in your Mobile application should now be also visible in Home Assistant (miele.*). In addition, there will be a number of binary_sensors and sensors that can be used for automation.

Questions

Please see the Miele@home, miele@mobile component discussion thread on the Home Assistant community site.