Installation problem

[maciekwessel]

I cannot finish installation because of error- messege below- anybody can help?
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
libimath-dev : Conflicts: libilmbase-dev
libopenexr-dev : Breaks: libilmbase-dev (< 2.5.7-3~)
E: Unable to correct problems, you have held broken packages.

I am new in Linux, please help with CLEAR instructions ;-)

[maciekwessel]

My distribution is Bookworm with desktop

[maciekwessel]

Only difference of procedure is that my RPI has Real Time Clock module installed manually.

[SNinfinite]

I just encountered the same issue. Got a new RPI 4 and tried to follow the setup instructions on the "getting started" page. Uninstalled libimath-dev and executed the setup command but the same error shows up. Updated the packages as well but this did not solve the issue. I hope we can find a solution soon. Thanks!

[maciekwessel]

Ufff ...ok... so its not only my problem..

[aaronwmorris]

That is really weird, I just tested on a RPi4 with bookworm about 4 days ago and everything installed fine. My test this morning was x86_64 bookworm. The only difference is maybe I used the Lite (non-GUI) image. I will try with the desktop image today or tomorrow.

[SNinfinite]

I had 32 bit version installed. I'll try with 64 bit OS.

[SNinfinite]

I had 32 bit version installed. I'll try with 64 bit OS.

Setup completed as per instructions with 64 bit OS.

[aaronwmorris]

Change to the indi-allsky/ folder and you should be all set.

[maciekwessel]

Its worst. Aaron tell me- what is your setup? What kind of camera and PI? I will reproduce this setup as I am tired with my concept

[maciekwessel]

And OS 32 or 64 bits? Indi 2.0.3 or 2.0.4?

[aaronwmorris]

I am pretty sure I have tested 2.0.3 on Raspi 3 and 4. The cameras I have outside are ZWO cameras on a LePotato and RockPi 3 on 2.0.2, I believe. I have quite a few cameras and systems which I use for testing. Unfortunately, everything is currently packed in boxes because I am in the middle of a move.

Almost all of my systems are 64-bit.

[aaronwmorris]

Give me a couple of days to go dig out my cameras. I have a ASI120MC-S I can test with.

[SNinfinite]

I completed the setup and executed the following after connecting my camera (SVbony 305c):
systemctl --user start indiserver
systemctl --user start indi-allsky

I was able to login to the indi-allsky web application but I could not check my camera info (Internal Server Error)

Do i need to execute the following?

Stop indi-allsky service
systemctl --user stop indi-allsky
Activate the indi-allsky python virtual environment
source virtualenv/indi-allsky/bin/activate
Start indi-allsky
./allsky.py run

Thanks for the cool project Aaron and for helping out with the questions.

[maciekwessel]

What does it means? I should start from the bigginning or there is a path? code? should be entered?

[SNinfinite]

Update instructions from the wiki page:
https://github.com/aaronwmorris/indi-allsky/wiki/Updating-indi-allsky

[maciekwessel]

I understand this is for SVbony 502. What with ASI 120 MC then?

[maciekwessel]

Thanks. It helps.

[aaronwmorris]

I have mentioned in a couple of other threads, I am not sure if the INDI 2.0.4 release is stable with the sv305. The svbony driver was completely rewritten last month. I know it was working in the 2.0.3 or 2.0.2 release. I need to perform some more testing.

indilib/indi-3rdparty#839