diff --git a/docs/assets/images/general/electronics/Belt_Tension330.png b/docs/assets/images/general/electronics/Belt_Tension330.png new file mode 100644 index 00000000..085da170 Binary files /dev/null and b/docs/assets/images/general/electronics/Belt_Tension330.png differ diff --git a/docs/assets/images/general/electronics/belt_Tension235.png b/docs/assets/images/general/electronics/belt_Tension235.png new file mode 100644 index 00000000..58b8adb1 Binary files /dev/null and b/docs/assets/images/general/electronics/belt_Tension235.png differ diff --git a/docs/general/belt-tensioning.md b/docs/general/belt-tensioning.md index 7822344e..914fd01f 100644 --- a/docs/general/belt-tensioning.md +++ b/docs/general/belt-tensioning.md @@ -28,7 +28,9 @@ Recommended target acoustic frequency: - Printed version: 110Hz - CNC / Mellow kit: 130Hz -![Vz330 belt tensioning](https://www.youtube.com/watch?v=qNMXW6MUV5E) +Put the gantry in the center or roughly 150mm's from the front and use the 2 short belts on the Front Left and Right side from Idler/motor to X gantry Pulley. Use the green sections to measure the Freq. + +![Belt_Tenstion](../assets/images/general/electronics/Belt_Tension330.png) ### VzBoT-235 @@ -39,4 +41,6 @@ Recommended target acoustic frequency: - Printed version: 110Hz - CNC / Mellow kit: 130Hz -![Vz235 belt tensioning](https://www.youtube.com/watch?v=lP59PClF_PU&start=4380&end=4550) +Put at roughly 150mm's from the front and use the 2 short belts on the front Left and Right side from idler/motor to X gantry pulley. Use the green sections to measure the Freq. + +![Belt_Tenstion](../assets/images/general/electronics/Belt_Tension235.png) \ No newline at end of file diff --git a/docs/vz235_mellow/gantry.md b/docs/vz235_mellow/gantry.md index 5054ea90..10ed4a9f 100644 --- a/docs/vz235_mellow/gantry.md +++ b/docs/vz235_mellow/gantry.md @@ -18,6 +18,8 @@ The gantry is configurable for an AWD version and a 2WD version. The only differ ![Overview](../../../assets/images/manual/vz235_mellow/gantry/overview.png) +[Belt tensioning](/general/belt-tensioning) + ## Placeholder parts The Mellow VzBot kits come with placeholder printed parts on the gantry which allow the gantry to be shipped as a complete assembly. These parts need replacing with your own printed parts. Further instructions can be found on the [placeholder parts](./gantry/placeholder-parts) page. @@ -36,5 +38,4 @@ The video tutorial below depicts the AWD configuration, but may still be useful [50:00](https://www.youtube.com/watch?v=lP59PClF_PU&t=3000s) X axis [52:15](https://www.youtube.com/watch?v=lP59PClF_PU&t=3135s) Vz-Printhead mounting [55:34](https://www.youtube.com/watch?v=lP59PClF_PU&t=3334s) Belts installation -[01:13:00](https://www.youtube.com/watch?v=lP59PClF_PU&t=4380s) Belt tensioning [01:15:50](https://www.youtube.com/watch?v=lP59PClF_PU&t=4550s) Back plate installation diff --git a/docs/vz235_mellow/gantry/belt_routing.md b/docs/vz235_mellow/gantry/belt_routing.md index 7638a722..3f39bd57 100644 --- a/docs/vz235_mellow/gantry/belt_routing.md +++ b/docs/vz235_mellow/gantry/belt_routing.md @@ -30,4 +30,5 @@ In the sample pinter.cfg file there is a macro included that enables all XY moto ## Vz-Printhead ![VzBoT - Belts installation](https://youtu.be/Ibi27Toh-pg) -![VzBoT belt tensioning](https://www.youtube.com/watch?v=qNMXW6MUV5E&t=390s) \ No newline at end of file + +[Belt tensioning](/general/belt-tensioning) \ No newline at end of file diff --git a/docs/vz235_printed/gantry.md b/docs/vz235_printed/gantry.md index f616f317..9fa108bc 100644 --- a/docs/vz235_printed/gantry.md +++ b/docs/vz235_printed/gantry.md @@ -16,6 +16,8 @@ The gantry is configurable for an AWD version and a 2WD version. The major diffe ![Gantry](../../assets/images/manual/vz235_printed/printed_preview_md.png) +[Belt tensioning](/general/belt-tensioning) + ## Video tutorial The video tutorial below depicts the AWD configuration, but may still be useful to those building a 2WD kit. @@ -29,6 +31,5 @@ The video tutorial below depicts the AWD configuration, but may still be useful [47:15](https://www.youtube.com/watch?v=lP59PClF_PU&t=2835s) Y gantry (or called XY joiner) [50:00](https://www.youtube.com/watch?v=lP59PClF_PU&t=3000s) X axis [52:15](https://www.youtube.com/watch?v=lP59PClF_PU&t=3135s) Vz-Printhead mounting -[55:34](https://www.youtube.com/watch?v=lP59PClF_PU&t=3334s) Belts installation -[01:13:00](https://www.youtube.com/watch?v=lP59PClF_PU&t=4380s) Belt tensioning +[55:34](https://www.youtube.com/watch?v=lP59PClF_PU&t=3334s) Belts installation [01:15:50](https://www.youtube.com/watch?v=lP59PClF_PU&t=4550s) Back plate installation diff --git a/docs/vz235_printed/gantry/belt_routing.md b/docs/vz235_printed/gantry/belt_routing.md index f0bdf01f..35d0b24a 100644 --- a/docs/vz235_printed/gantry/belt_routing.md +++ b/docs/vz235_printed/gantry/belt_routing.md @@ -30,4 +30,3 @@ In the sample pinter.cfg file there is a macro included that enables all XY moto ## Vz-Printhead ![VzBoT - Belts installation](https://youtu.be/Ibi27Toh-pg) -![VzBoT belt tensioning](https://www.youtube.com/watch?v=qNMXW6MUV5E&t=390s) diff --git a/docs/vz330_mellow/gantry.md b/docs/vz330_mellow/gantry.md index a4312c48..808f6e95 100644 --- a/docs/vz330_mellow/gantry.md +++ b/docs/vz330_mellow/gantry.md @@ -39,7 +39,6 @@ The video tutorial below depicts the Vz235 (smaller printer) AWD configuration, [50:00](https://www.youtube.com/watch?v=lP59PClF_PU&t=3000s) X axis [52:15](https://www.youtube.com/watch?v=lP59PClF_PU&t=3135s) Vz-Printhead mounting [55:34](https://www.youtube.com/watch?v=lP59PClF_PU&t=3334s) Belts installation -[01:13:00](https://www.youtube.com/watch?v=lP59PClF_PU&t=4380s) Belt tensioning [01:15:50](https://www.youtube.com/watch?v=lP59PClF_PU&t=4550s) Back plate installation [MGN12 alignment tool]: https://github.com/VzBoT3D/VzBoT-Vz330/blob/master/Assemblies%20BOM%20and%20STL/Alignment%20Tools/MGN12-alignment%20tool.stl \ No newline at end of file