diff --git a/docs/general/belt-tensioning.md b/docs/general/belt-tensioning.md index 9322009..c62b4e1 100644 --- a/docs/general/belt-tensioning.md +++ b/docs/general/belt-tensioning.md @@ -25,10 +25,10 @@ The Vz330 belt tensioners are located at the back of the printer. Loosen the fix Recommended target acoustic frequency: -- Printed version: 110Hz -- CNC / Mellow kit: 130Hz +- Printed version: Min 135Hz - Max 180Hz +- CNC / Mellow kit: Min 150Hz - Max 189Hz -Put the gantry in the center or roughly 150mm's from the front and use the 2 short belts on the Front Left and Right side from Idler/motor to X gantry Pulley. Use the green sections to measure the Freq. +Put the gantry at 150mm's from the front and use the 2 short belts on the Front Left and Right side from Idler/motor to X gantry Pulley. Use the green sections to measure the Freq. ![Belt_Tenstion](../assets/images/general/electronics/Belt_Tension330.png) @@ -38,8 +38,8 @@ The Vz235 belt tensioners are located at the front of the printer, either side o Recommended target acoustic frequency: -- Printed version: 110Hz -- CNC / Mellow kit: 130Hz +- Printed version: Min 135Hz - Max 180Hz +- CNC / Mellow kit: Min 150Hz - Max 189Hz Put at roughly 150mm's from the front and use the 2 short belts on the front Left and Right side from idler/motor to X gantry pulley. Use the green sections to measure the Freq.