TheRedDaemon / LittleCrusaderAsi/

[Cheatnoob]

2021-10-05 16:09:12,280343 INFO Logger loaded.
2021-10-05 16:09:12,281341 INFO Configuration loaded.
2021-10-05 16:09:12,281341 WARNING AICLoad: 'keyConfig': No 'applyAICFiles' found. The file AICs can not be applied using only this mod and the keyboard. However, should BltOverlay not exist, 'reloadMain' and 'reloadAll' will also do this.
2021-10-05 16:09:12,281341 INFO Mods loaded.
2021-10-05 16:09:12,281341 INFO AddressBase initialized.
2021-10-05 16:09:12,281341 INFO Detected Stronghold 1.41.
2021-10-05 16:09:12,281341 INFO VersionGetter initialized.
2021-10-05 16:09:12,281341 INFO AddressResolver initialized.
2021-10-05 16:09:12,281341 INFO KeyboardInterceptor initialized.
2021-10-05 16:09:12,288322 INFO BltOverlay initialized.
2021-10-05 16:09:12,288322 WARNING AICLoad: Unable to load file 'ratWolf.json'. Is the name or the aic folder wrong?
2021-10-05 16:09:12,288322 WARNING AICLoad: Unable to load file 'wolfRat.json'. Is the name or the aic folder wrong?
2021-10-05 16:09:12,288322 WARNING AICLoad: Unable to load file 'vanilla.json'. Is the name or the aic folder wrong?
2021-10-05 16:09:12,288322 INFO AICLoad initialized.
2021-10-05 16:09:12,288322 INFO BuildRangeChanger initialized.
2021-10-05 16:09:12,288322 INFO 7 of 7 mods initialized.

i didn't have mod button Please help there can i fix it

[TheRedDaemon]

Hi. First of all, the second picture shows the source code. You would only need this if you want to compile it yourself.
You only need the content of the LittleCrusaderAsi_v0.2.zip that you can download from THIS page. Saves space. 😄

However, since you posted a log, I assume you already managed to load it into the process. In this case, I would need to know if you are using the modConfig.json from the LittleCrusaderAsi_v0.2.zip, because this config should display a menu indicator in the upper left corner.

If this is the case and your question is more "How do I control it." ->The release page texts list the controls for the provided config. In short:

"Page Down" -> activate keyboard inputs

"LeftCtrl" + "Division (/)" on numpad toggles the menu.

"LeftCtrl" + "Multiplication (*)" on numpad toggles the output console.

The menu is also controlled by numpad keys, but in numeric mode!

• The directions are "4" (left), "6" (right), "8" (up) and "2" (down).
• Back or delete actions are on "0".
• Action or enter is on "5".

Did this solve your problem?

I also have to state that this project is basically abandoned now.
For a bigger and active project I recommend to take a look at the UCP.