From bd2c977e3e62a7b0307a8bcd139af3131058c77d Mon Sep 17 00:00:00 2001 From: Parker Date: Thu, 7 Nov 2024 18:18:28 +0800 Subject: [PATCH] change recamera getting started files --- .../Edge/reCamera/reCamera_Getting_Started.md | 44 +++++++++++++++++-- 1 file changed, 40 insertions(+), 4 deletions(-) diff --git a/docs/Edge/reCamera/reCamera_Getting_Started.md b/docs/Edge/reCamera/reCamera_Getting_Started.md index 4f18200bd1d6..99c771473d3c 100644 --- a/docs/Edge/reCamera/reCamera_Getting_Started.md +++ b/docs/Edge/reCamera/reCamera_Getting_Started.md @@ -23,7 +23,7 @@ This combination makes reCamera a standalone system that can handle basic detect ### USB NET setup To use USB networking, we enabled UsbNcm and DHCP by default on the system. UsbNcm is driver-free on Linux, macOS, and the latest Windows systems. You can log in to -recamera's terminal directly using `ssh recamrea@192.168.42.1` ,`passwd = recamera` . +recamera's terminal directly using `ssh recamera@192.168.42.1` ,`passwd = recamera` . - [Windows](#jump1) - [Linux](#jump2) @@ -57,15 +57,22 @@ Select `Let me pick from a list of available drivers on my computer`
-**step4**:Selet `Microsoft` -> `UsbNcm Host Device` then click Next. +**step4:**: +Select `Network adapters` and then click `next` + +
+ +
+ +**step5**:Selet `Microsoft` -> `UsbNcm Host Device` then click Next.
-**step5**:When the alert bar pops up, select `Yes` +**step6**:When the alert bar pops up, select `Yes`
-**step6**:Enter ping 192.168.42.1 in a terminal window. +**step7**:Enter ping 192.168.42.1 in a terminal window.
The following output shows that you have successfully connected to the reCamera. @@ -85,6 +92,7 @@ Check the usb network adapter in System Settings -> Network. The ip of the devic ### Computer network error +#### windows If your Windows 10 System computer has network access issues after using the USB network of reCamera. Press `win+x` click Control Panel. Select All Control Panel Items -> Network Connections. @@ -96,10 +104,38 @@ Right mouse click UsbNcm Host Device. Select `Properties` -> `TCP/IPv4` -> `Prop Then your network is back up.
+#### MAC + If your computer is running MacOS. You only need to set the priority of the computer network card UsbNcm network card last
+The specific Settings are as follows: + +**step1**: Select `System Settings` + +
+ +**step2**: You will see this order, and we are about to change it. + +
+ +**step3**: Drag all the way to the bottom, and click it. + +
+ +**step4**: Select `Set Service Order` + +
+ +**step5**: Drag NCM below Wi-Fi and then click `ok` + +
+ +**step6**: Finally, you should see the Settings shown + +
+ ## System update and upgrade