Build Motr from Source in a Cluster

This wiki provides information on how to build motr from source and then run a cluster of motr nodes.

Prerequisites

Create a fresh VM with CentOS 7.9.2009. ( Note: These steps were tested on Windows Hyper-V and VMware Workstation Pro 16, but should in theory work on any hypervisor)
Follow the steps outline in this guide to build Motr from sources on your node.

Procedure

Clone your VM
- You can clone N times ( Note: This guide was tested with 2 nodes and 3 nodes, but in theory this should work for any N number of nodes )
Install HARE
- Choose any node in your cluster, we will call this node the Main node for ease of naming. Follow the HARE installation guide, and install HARE on all nodes. Once you get to the Quick Start you can return to this guide and continue with the next step below.

Configure your CDF ( cluster description file ) to "point" to all nodes in your cluster:

Create the CDF:

cp /opt/seagate/cortx/hare/share/cfgen/examples/singlenode.yaml ~/CDF.yaml
vi ~/CDF.yaml

Configure the CDF to "point" to each node in the cluster:

Add this text N-1 times, where N is the number of nodes to your CDF. The ip a will provide your available data_iface values, you must use the one that has state UP. Next, you can get the hostname for the node by running cat /etc/hostname. However, in some cases, the hostname might not be publicly recognizable by other nodes, so it's recommended to put an IP address instead of a hostname.

- hostname: ssu0     # [user@]hostname
  data_iface: ens33        # name of data network interface
  #data_iface_type: o2ib  # type of network interface (optional);
                          # supported values: "tcp" (default), "o2ib"
  m0_servers:
    - runs_confd: true
      io_disks:
        data: []
    - io_disks:
        #meta_data: /path/to/meta-data/drive
        data:
            - /dev/loop0
            - /dev/loop1
            - /dev/loop2
            - /dev/loop3
            - /dev/loop4
            - /dev/loop5
            - /dev/loop6
            - /dev/loop7
            - /dev/loop8
            - /dev/loop9
  m0_clients:
      s3: 0         # number of S3 servers to start
      other: 2      # max quantity of other Motr clients this host may have

A single node CDF should look like this:

 # Cluster Description File (CDF).
 # See `cfgen --help-schema` for the format description.
 nodes:
 - hostname: ssu0     # [user@]hostname
   data_iface: ens33        # name of data network interface
   #data_iface_type: o2ib  # type of network interface (optional);
                           # supported values: "tcp" (default), "o2ib"
     m0_servers:
           - runs_confd: true
             io_disks:
               data: []
           - io_disks:
               #meta_data: /path/to/meta-data/drive
               data:
                 - /dev/loop0
                 - /dev/loop1
                 - /dev/loop2
                 - /dev/loop3
                 - /dev/loop4
                 - /dev/loop5
                 - /dev/loop6
                 - /dev/loop7
                 - /dev/loop8
                 - /dev/loop9
         m0_clients:
           s3: 0         # number of S3 servers to start
           other: 2      # max quantity of other Motr clients this host may have
      pools:
        - name: the pool
          #type: sns  # optional; supported values: "sns" (default), "dix", "md"
          #disk_refs:
          #  - { path: /dev/loop0, node: localhost }
          #  - path: /dev/loop1
          #  - path: /dev/loop2
          #  - path: /dev/loop3
          #  - path: /dev/loop4
          #  - path: /dev/loop5
          #  - path: /dev/loop6
          #  - path: /dev/loop7
          #  - path: /dev/loop8
          #  - path: /dev/loop9
          data_units: 1
          parity_units: 0
          #allowed_failures: { site: 0, rack: 0, encl: 0, ctrl: 0, disk: 0 }
      #profiles:
      #  - name: default
      #    pools: [ the pool ]

Whereas a CDF with 3 nodes should look like this:

 # Cluster Description File (CDF).
 # See `cfgen --help-schema` for the format description.
 nodes:
 - hostname: ssu0     # [user@]hostname
   data_iface: ens33        # name of data network interface
   #data_iface_type: o2ib  # type of network interface (optional);
                           # supported values: "tcp" (default), "o2ib"
     m0_servers:
           - runs_confd: true
             io_disks:
               data: []
           - io_disks:
               #meta_data: /path/to/meta-data/drive
               data:
                 - /dev/loop0
                 - /dev/loop1
                 - /dev/loop2
                 - /dev/loop3
                 - /dev/loop4
                 - /dev/loop5
                 - /dev/loop6
                 - /dev/loop7
                 - /dev/loop8
                 - /dev/loop9
         m0_clients:
           s3: 0         # number of S3 servers to start
           other: 2      # max quantity of other Motr clients this host may have
 
     - hostname: ssu1     # [user@]hostname
   data_iface: ens33        # name of data network interface
   #data_iface_type: o2ib  # type of network interface (optional);
                           # supported values: "tcp" (default), "o2ib"
     m0_servers:
           - runs_confd: true
             io_disks:
               data: []
           - io_disks:
               #meta_data: /path/to/meta-data/drive
               data:
                 - /dev/loop0
                 - /dev/loop1
                 - /dev/loop2
                 - /dev/loop3
                 - /dev/loop4
                 - /dev/loop5
                 - /dev/loop6
                 - /dev/loop7
                 - /dev/loop8
                 - /dev/loop9
         m0_clients:
           s3: 0         # number of S3 servers to start
           other: 2      # max quantity of other Motr clients this host may have

     - hostname: ssu2     # [user@]hostname
   data_iface: ens33        # name of data network interface
   #data_iface_type: o2ib  # type of network interface (optional);
                           # supported values: "tcp" (default), "o2ib"
     m0_servers:
           - runs_confd: true
             io_disks:
               data: []
           - io_disks:
               #meta_data: /path/to/meta-data/drive
               data:
                 - /dev/loop0
                 - /dev/loop1
                 - /dev/loop2
                 - /dev/loop3
                 - /dev/loop4
                 - /dev/loop5
                 - /dev/loop6
                 - /dev/loop7
                 - /dev/loop8
                 - /dev/loop9
         m0_clients:
           s3: 0         # number of S3 servers to start
           other: 2      # max quantity of other Motr clients this host may have
      pools:
        - name: the pool
          #type: sns  # optional; supported values: "sns" (default), "dix", "md"
          #disk_refs:
          #  - { path: /dev/loop0, node: localhost }
          #  - path: /dev/loop1
          #  - path: /dev/loop2
          #  - path: /dev/loop3
          #  - path: /dev/loop4
          #  - path: /dev/loop5
          #  - path: /dev/loop6
          #  - path: /dev/loop7
          #  - path: /dev/loop8
          #  - path: /dev/loop9
          data_units: 1
          parity_units: 0
          #allowed_failures: { site: 0, rack: 0, encl: 0, ctrl: 0, disk: 0 }
      #profiles:
      #  - name: default
      #    pools: [ the pool ]

Disable the firewall on each node:

This is needed by s3 server, no need to do this if you don't have s3 client (s3: 0) on the CDF (at m0_clients section).
```
sudo systemctl stop firewalld 
sudo systemctl disable firewalld
```
Make sure that selinux is disabled:

This is needed by s3 server, no need to do this if you don't have s3 client (s3: 0) on the CDF (at m0_clients section).
- vi /etc/selinux/config and make sure that selinux is disabled

Configure passwordless ssh:

On the main node:
```
ssh-keygen
```
On ALL child nodes:
```
vi /etc/ssh/sshd_config
```
- And make sure that the following parameters are set:
```
PasswordAuthentication yes
PermitRootLogin yes
```

On the main node:

ssh-copy-id -i ~/.ssh/foo root@<hostname of node or IP address>

On ALL child nodes:

sudo passwd -l root
vi /etc/ssh/sshd_config

And set the following parameters:

PasswordAuthentication no
PermitRootLogin without-password

Run the following commands on ALL ( main and child ) nodes:

Should be run only once. If you run it twice, the second run will cancel out the setup.
```
sudo mkdir -p /var/motr
for i in {0..9}; do
    sudo dd if=/dev/zero of=/var/motr/disk$i.img bs=1M seek=9999 count=1
    sudo losetup /dev/loop$i /var/motr/disk$i.img
done
```
Check using lsblk | grep loop and make sure that you have loop devices listed.
Start the cluster:

Run this at the main node, the first node (hostname) listed at the CDF.
```
hctl bootstrap --mkfs ~/CDF.yaml
```

Run I/O test:

/opt/seagate/cortx/hare/libexec/m0crate-io-conf >/tmp/m0crate-io.yaml
dd if=/dev/urandom of=/tmp/128M bs=1M count=128
sudo m0crate -S /tmp/m0crate-io.yaml

Stop the cluster:
```
hctl shutdown
```

Tested by:

Sep 15, 2021: Naga Kishore Kommuri ([email protected]) using CentOS Linux release 7.9.2009, verified with git tag CORTX-2.0.0-77 (#7d4d09cc9fd32ec7690c94298136b372069f3ce3) on main branch
Jul 2, 2021: Daniar Kurniawan ([email protected]) using CentOS 7.8.2003 on 4 bare-metal servers hosted by Chameleon (node_type=Skylake).
Feb 22, 2021: Mayur Gupta ([email protected]) using CentOS 7.8.2003 on a Windows laptop running VMware Workstation.
Feb 10, 2021: Patrick Hession ([email protected]) using CentOS 7.8.2003 on a Windows laptop running Windows Hyper-V.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Build Motr from Source in a Cluster

Prerequisites

Procedure

Clone your VM

Install HARE

Configure your CDF ( cluster description file ) to "point" to all nodes in your cluster:

Disable the firewall on each node:

Make sure that selinux is disabled:

Configure passwordless ssh:

Run the following commands on ALL ( main and child ) nodes:

Start the cluster:

Run I/O test:

Stop the cluster:

Tested by:

Clone this wiki locally