VMU support?

[MastaG]

Darthcloud just released an updated firmware with VMU support.
Version 1.9 here: https://darthcloud.itch.io/blueretro

I've tried to flash it with the NodeMCU Pyflasher, but it doesn't work.

Could you build an updated firmware for the Retroscaler based on his v1.9 version?

[brycethorup]

I would like this as well

[brycethorup]

Update: I was able to flash the v1.9 firmware using the web bluetooth utility found at https://blueretro.io/index.html I'm still trying to figure out how to get the virtual VMU to work.

[scrappysphinx]

I have also flashed mine with the 1.9 firmware and have the vmu working. After flashing i connected to the adapter and went to the advanced config menu https://blueretro.io/advance.html

scroll down to output config and there is a dropdown box for accessories which had rumble listed. In that menu you can select rumble, vmu or both. After selecting both and rebooting my DC the vmu appeared, all i had to do was format it.

Hope this helps

[danko79]

Hi, try this and please let me know.
DC 1.9.1.zip

[gvicentes]

Hi, try this and please let me know. DC 1.9.1.zip

Thanks! I tested it here, with the VMU working. But there is a bug in the control LEDs. Red LED (control 1) stays on, even without any control being synchronized and the other LEDs do not work....