Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

MCU Protocol error #324

Open
igor7205 opened this issue Dec 22, 2024 · 2 comments
Open

MCU Protocol error #324

igor7205 opened this issue Dec 22, 2024 · 2 comments
Labels
bug Something isn't working

Comments

@igor7205
Copy link

What happened

This is frequently caused by running an older version of the
firmware on the MCU(s). Fix by recompiling and flashing the
firmware.

Your Klipper version is: v0.12.0-396-gb7233d119-dirty
MCU(s) which should be updated:
mcu: Current version v0.12.0-396-gb7233d119
rpi: Current version v0.12.0-396-gb7233d119
btt_lis2dw: Current version v0.12.0-114-ga77d0790
Up-to-date MCU(s):

Once the underlying issue is corrected, use the "RESTART"
command to reload the config and restart the host software.

mcu 'btt_lis2dw': Unable to extract params from: config_lis2dw

What did you expect to happen

If I turn off the config then everything works,

How to reproduce

I also have the config in the overwrite section, somehow the system wants the same clipper version from all mcu

Additional information

No response

@igor7205 igor7205 added the bug Something isn't working label Dec 22, 2024
@GP3D84
Copy link
Contributor

GP3D84 commented Dec 22, 2024

this has nothing to do with ratos
you need to flash your beacon clone to the latest firmware version.

@igor7205
Copy link
Author

igor7205 commented Dec 22, 2024

This is an adxl connected to usb on the pi, no beacon, has always worked well until today
btt_lis2dw: Current version v0.12.0-114-ga77d0790

This file contains common pin mappings for the bigtreetech lis2dw v1.0

To use this config, the firmware should be compiled for the

RP2040 with "USB"

The micro-controller will be used to control the components on the nozzle.

See docs/Config_Reference.md for a description of parameters.

[mcu btt_lis2dw]
serial: /dev/serial/by-id/usb-Klipper_rp2040_btt_acc-if00

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
bug Something isn't working
Projects
None yet
Development

No branches or pull requests

2 participants