Skip to content

Latest commit

 

History

History
291 lines (209 loc) · 12.7 KB

README.md

File metadata and controls

291 lines (209 loc) · 12.7 KB
Raw

ODA Canvas installation

The Reference Implementation of the ODA Canvas is a set of Helm charts that can be used to install and configure a fully working Canvas. The Reference Implementation is built on top of Kubernetes and Istio.

Software Versions

For each release, we will support a min and max Kubernetes version.

ODA Component version Min Kubernetes version Max Kubernetes version
v1alpha4 1.20 1.22
v1beta1 1.22 1.25
v1beta2 1.22 1.27
v1beta3 1.22 1.29

If you are connected to an ODA Canvas, to test what version of Canvas it is, use the command:

kubectl get crd components.oda.tmforum.org -o jsonpath='{.spec.versions[?(@.served==true)].name}'

It will return the versions of components the canvas supports. A canvas should support N-2 versions of a component i.e. for the v1beta3 canvas, it will support components that are v1beta3, v1beta2, v1beta1 (and v1alpha4 with a deprecation warning).

We will test the Reference Implementation Canvas against a range of kubernetes versions and on a number of different deployments.

Kubernetes deployment Tested Notes
AWS EKS yes EKS 1.29
Rancher on AWS Yes [Open Digital Lab environment]
Azure AKS Yes
GCP GKE Yes [Innovation Hub environment]
Microk8s Yes
MiniKube Yes
Docker Desktop Yes see also devcontainer.md
Kind Using Canvas-in-a-bottle
K3s Yes
(other) To suggest additional environments please add to this issue

The environment where the chart has been tested has the following

Software Version
Istio 1.16.1
Helm 3.10

The helm chart installs the following updated versions of third party to

Software Version
Cert-Manager 1.20
Keycloak 20.0.3
Postgress 15.0.1

Configuration values

The values used here

Environment installation

1. Kubernetes distribution

Prerequisites: a running K8S distribution.

The procedure has been tested

  • local k3s distribution, rancher desktop or similar
  • AWS Kops with AmazonVPC as network and with and without cert-manager managed by kops

We assume there is a kubeconfig file available with adequate permissions on the K8s cluster to:

  • Manage namespaces
  • Install CRDs
  • Manage resources in namespaces

Run the following to check that you have the required Kubernetes permissions to run the install (or run ./installation/precheck.sh):

kubectl auth can-i create namespaces --all-namespaces
kubectl auth can-i create customresourcedefinitions --all-namespaces  
kubectl auth can-i create clusterroles --all-namespaces
kubectl auth can-i create clusterrolebindings --all-namespaces
kubectl auth can-i create mutatingwebhookconfigurations --all-namespaces
kubectl auth can-i create validatingwebhookconfigurations --all-namespaces
kubectl auth can-i create clusterissuers  --all-namespaces
kubectl auth can-i create serviceaccounts
kubectl auth can-i create secrets
kubectl auth can-i create configmaps
kubectl auth can-i create roles
kubectl auth can-i create rolebindings
kubectl auth can-i create services
kubectl auth can-i create deployments
kubectl auth can-i create statefulsets
kubectl auth can-i create gateways  
kubectl auth can-i create jobs
kubectl auth can-i create certificates  
kubectl auth can-i create issuers

2. Helm

A Helm 3.0+ installation is needed.

Helm currently has an issue with the dependencies declared, the helm dependency update command only takes care of the dependencies at the first level preventing the correct installation. It supposes to be addressed in a future (May'23) 3.12 version

Until that version is released, we can use a plugin to sort it out this https://github.com/Noksa/helm-resolve-deps

helm plugin install --version "main" https://github.com/Noksa/helm-resolve-deps.git

The charts used need the following repositories

helm repo add jetstack https://charts.jetstack.io
helm repo add bitnami https://charts.bitnami.com/bitnami

3. Istio

We follow the helm steps provided by Istio

helm repo add istio https://istio-release.storage.googleapis.com/charts
helm repo update
kubectl create namespace istio-system
helm install istio-base istio/base -n istio-system
helm install istiod istio/istiod -n istio-system --wait
kubectl create namespace istio-ingress
kubectl label namespace istio-ingress istio-injection=enabled
helm install istio-ingress istio/gateway -n istio-ingress --set labels.app=istio-ingress --set labels.istio=ingressgateway --wait

4. HashiCorp Vault

A setup script to deploy and configure HashiCorp Vault into the cluster and configure it to trust the Service-Account-Issuer of this cluster is provided in CanvasVault/setup_CanvasVault.sh.

If HashiCorp Vault is NOT installed, everything works fine, only if a component requests Secrets-Management, it will get stuck in state "InProgress-SecretsConfig".

4. Reference implementation

  1. Add oda-canvas helm repo

    helm repo add oda-canvas https://tmforum-oda.github.io/oda-canvas
helm repo update

  2. Install the reference implementation

    Install the canvas using the following command.

    helm install canvas oda-canvas/canvas-oda -n canvas --create-namespace

Troubleshooting

Error instaling: BackoffLimitExceeded

The installation can fail with an error

Error: INSTALLATION FAILED: failed post-install: job failed: BackoffLimitExceeded

There are two major causes of this error

  1. An error on the Job for configuring keycloak
kubectl get pods -n canvas
NAME                                        READY   STATUS      RESTARTS   AGE
canvas-keycloak-0                           1/1     Running     0          4m43s
canvas-keycloak-keycloak-config-cli-5k6h7   0/1     Error       0          2m50s
canvas-keycloak-keycloak-config-cli-fq5ph   1/1     Running     0          30s
canvas-postgresql-0                         1/1     Running     0          4m43s
compcrdwebhook-658f4868b8-48cvx             1/1     Running     0          4m43s
job-hook-postinstall-6bm99                  0/1     Completed   0          4m43s
oda-controller-ingress-d5c495bbb-crt4t      2/2     Running     0          4m43s

Checking the logs of the failed Job

2023-02-01 15:23:19.488  INFO 1 --- [           main] d.a.k.config.provider.KeycloakProvider   : Wait 120 seconds until http://canvas-keycloak-headless:8083/auth/ is available ...
2023-02-01 15:25:19.511 ERROR 1 --- [           main] d.a.k.config.KeycloakConfigRunner        : Could not connect to keycloak in 120 seconds: HTTP 403 Forbidden

That means that your k8s cluster assign IPs to PODs that Keycloak consider public ones and forced to use HTTPS The ranges valid are the following localhost, 127.0.0.1, 10.x.x.x, 192.168.x.x, and 172.16.x.x

  1. An Error in the Job but caused because the canvas-keycloak-0 that is in CrashLoopBackOff
kubectl get pods -A
NAMESPACE       NAME                                              READY   STATUS             RESTARTS      AGE
canvas          canvas-keycloak-0                                 0/1     CrashLoopBackOff   4 (89s ago)   6m11s
canvas          canvas-keycloak-keycloak-config-cli-9ks9d         0/1     Error              0             2m28s
canvas          canvas-keycloak-keycloak-config-cli-cd2gv         0/1     Error              0             4m38s
canvas          canvas-postgresql-0                               1/1     Running            0             6m11s
canvas          compcrdwebhook-658f4868b8-v9sc2                   1/1     Running            0             6m11s
canvas          job-hook-postinstall-v56pt                        0/1     Completed          0             6m10

Checking the logs kubectl logs -n canvas sts/canvas-postgresql we can see an error

FATAL:  password authentication failed for user "bn_keycloak"

In that case, a previous installation left a PVC reused by the Postgres pod.

To solve that issue

  • Uninstall the helm chart
  • Delete the PVC with kubectl delete pvc -n canvas data-canvas-postgresql-0
  • reinstall the canvas

Error installing : Failed post-install

The installation could fail with this error

failed post-install: warning: Hook post-install canvas-oda/charts/cert-manager-init/templates/issuer.yaml failed: Internal error occurred:
failed calling webhook "webhook.cert-manager.io": failed to call webhook: Post "https://canvas-cert-manager-webhook.cert-manager.svc:443/mutate?timeout=10s":
x509: certificate signed by unknown authority

That error arises when Cert-Manager is not ready to accept Issuers

Try first to uninstall the chart

helm uninstall -n canvas canvas

Delete persistence volume claim used for Keycloak

kubectl delete pvc -n canvas data-canvas-postgresql-0

Then manually delete the Lease object that causes the problem (Cert Manager relies on this object to select a leader)

kubectl get lease -n kube-system

Force the release of the lease without waiting for a timeout

kubectl delete lease cert-manager-cainjector-leader-election -n kube-system

The installation has a configurable wait time cert-manager.leaseWaitTimeonStartup Increase leaseWaitTimeonStartup value btw 80-100 in canvas-oda/values.yaml

Reinstall it with the new time.

Changes

The Helm chart has been refactored to move all the different subcharts to the same level to improve readability. A new chart, oda-ca has been created as an umbrella to simplify the deployment.

OLD NEW DESCRIPTION
shell script oda-ca Chart of chart.
shell script cert-manager-init Install cert-manager Deploy Issuer and generate Certificate used by CRD webhook
canvas/chart/keycloak Bitnami/keycloak Direct remote dependency on oda-ca
canvas/ canvas-namespaces Namespaces
canvas/chart/controller controller ODA ingress controller
canvas/chart/crds oda-crds ODA crds
canvas/chart/weebhooks oda-webhook ODA mutating webhook to handle conversion among versions

oda-canvas helm chart uninstallation

To uninstall the oda-canvas chart:

helm uninstall oda-canvas -n canvas