Unable to get the Julia pras code to work

[wshobe]

My model is consistently failing at the call to the Julia code. This problem crops up in any case I run, including the cases_test.csv Pacific and ERCOT runs. I am running on a Linux HPC system (with slurm). The ReEDS-2.0 project folder has Julia set up with all the required packages. This error happens even if I set pras=0. I'm stuck and can't get any results. Any help/advice would be greatly appreciated.

slurm-848182.txt

[kennedy-mindermann]

It looks like some julia packages are not being found. You could try walking through the julia setup instructions again. Otherwise, if you would like to run ReEDS without PRAS, you'll want to set GSw_PRM_CapCredit = 1. You shouldn't need to change any other switch.

[wshobe]

I am getting the same failure even with GSw_PRM_CapCredit = 1. I have uploaded my cases file and gamslog.txt.
cases_pjm_historic.csv
gamslog.txt

Also, I have been through the Julia setup a couple of times. Do you have a diagnostic test I might do to check the setup?

[wshobe]

It does not appear to be sufficient to set GSw_PRM_CapCredit to 1. In Augur.py, the logical test in
if pras_this_solve_year or (not int(sw.GSw_PRM_CapCredit)):
evaluates to true if pras is 2 or under other circumstances, notwithstanding the value of the GS switch. So, since the default is pras=2, you need to set pras=0 as well. I did that and ran without PRAS. Now I'll try to figure out why my PRAS function isn't working.