Trying to have it made through your shared project on pcbway but there are clearance problems.

[noromamai]

The minimum clearance of the shared project files in the pcbway community is 0.15mm, but none of their solder masks they offer can go lower than 0.19mm. Is it ok to produce the pcb without solder mask?

[MouseBiteLabs]

Yes that's fine

…

On Thu, Nov 7, 2024, 4:53 AM noromamai ***@***.***> wrote: The minimum clearance of the project files is 0.15mm, but none of their solder masks they offer can go lower than 0.19mm. Is it ok to produce the pcb without solder mask? — Reply to this email directly, view it on GitHub <#3>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AXFAY4ZC3A5ALWEU6GJWW63Z7MZ77AVCNFSM6AAAAABRKZHY2KVHI2DSMVQWIX3LMV43ASLTON2WKOZSGY2DANBXGM2TQNI> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>