-
Notifications
You must be signed in to change notification settings - Fork 246
/
.travis.yml
354 lines (310 loc) · 36.7 KB
/
.travis.yml
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
# This file is used to configure the Travis CI tests of MiniCore
# Although sudo is no longer required by arduino-ci-script since the 1.0.0 release, for some reason setting "sudo: false" causes the Travis CI build time to significantly increase so this setting is left as "sudo: required"
sudo: required
env:
global:
# The Arduino IDE will be installed at APPLICATION_FOLDER/arduino
- APPLICATION_FOLDER="${HOME}/arduino-ide"
- SKETCHBOOK_FOLDER="${HOME}/Arduino"
# README.md states that LTO should only be used with Arduino IDE 1.6.11 and newer
- OLDEST_IDE_VERSION_TO_TEST_WITH_LTO="1.6.11"
# The oldest version of the Arduino IDE that MiniCore's platform.txt is compatible with is 1.6.2 but that IDE version has a bug that interferes with other installations of the IDE.
# Arduino IDE 1.6.3-1.6.5-r5 on Linux don't seem to include the MiniCore bundled library files (this information copied from MegaCore so may not apply to MiniCore).
# Arduino IDE 1.6.6 has many function prototype generation failures.
# So testing is done with milestone Arduino IDE versions, 1.6.7 and newer.
- IDE_VERSIONS_BEFORE_OLDEST_IDE_VERSION_TO_TEST_WITH_LTO='"1.6.7" "1.6.9"'
- IDE_VERSIONS_FROM_OLDEST_IDE_VERSION_TO_TEST_WITH_LTO='"'"$OLDEST_IDE_VERSION_TO_TEST_WITH_LTO"'" "1.6.13" "1.8.0" "1.8.5" "newest"'
- IDE_VERSION_LIST_LTO='('"$IDE_VERSIONS_FROM_OLDEST_IDE_VERSION_TO_TEST_WITH_LTO"')'
- IDE_VERSION_LIST_FULL='('"${IDE_VERSIONS_BEFORE_OLDEST_IDE_VERSION_TO_TEST_WITH_LTO} ${IDE_VERSIONS_FROM_OLDEST_IDE_VERSION_TO_TEST_WITH_LTO}"')'
matrix:
# Compile every example sketch for every library included with MiniCore for every MCU, every board option, every installed IDE version
# Each line in the matrix will be run as a separate job in the Travis CI build
# ATmega328
# bootloader=uart0, variant=modelP, BOD=2v7, LTO=Os, clock=16MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries" BOARD_ID="MiniCore:avr:328:bootloader=uart0,variant=modelP,BOD=2v7,LTO=Os,clock=16MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# LTO=Os_flto, clock=20MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries" BOARD_ID="MiniCore:avr:328:bootloader=uart0,variant=modelP,BOD=2v7,LTO=Os_flto,clock=20MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# bootloader=no_bootloader, variant=modelNonP, BOD=4v3, clock=18_432MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries" BOARD_ID="MiniCore:avr:328:bootloader=no_bootloader,variant=modelNonP,BOD=4v3,LTO=Os,clock=18_432MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# bootloader=uart1, variant=modelPB, BOD=1v8, clock=12MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries" BOARD_ID="MiniCore:avr:328:bootloader=uart1,variant=modelPB,BOD=1v8,LTO=Os,clock=12MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# BOD=disabled, clock=8MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries" BOARD_ID="MiniCore:avr:328:bootloader=uart0,variant=modelP,BOD=disabled,LTO=Os,clock=8MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=8MHz_internal
# F_CPU of 8 MHz has already been fully tested and the BOD and internal clock configuration will have no effect on code so it's only necessary to do a single verification per IDE version for the 8 MHz internal clock setting
- SKETCH_PATH="${APPLICATION_FOLDER}/arduino/examples/01.Basics/BareMinimum/BareMinimum.ino" BOARD_ID="MiniCore:avr:328:bootloader=uart0,variant=modelP,BOD=2v7,LTO=Os,clock=8MHz_internal" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=1MHz_internal
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries" BOARD_ID="MiniCore:avr:328:bootloader=uart0,variant=modelP,BOD=2v7,LTO=Os,clock=1MHz_internal" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# ATmega168
# bootloader=uart0, variant=modelP, BOD=2v7, LTO=Os, clock=16MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries" BOARD_ID="MiniCore:avr:168:bootloader=uart0,variant=modelP,BOD=2v7,LTO=Os,clock=16MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# LTO=Os_flto, clock=20MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries" BOARD_ID="MiniCore:avr:168:bootloader=uart0,variant=modelP,BOD=2v7,LTO=Os_flto,clock=20MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# bootloader=no_bootloader, variant=modelNonP, BOD=4v3, clock=18_432MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries" BOARD_ID="MiniCore:avr:168:bootloader=no_bootloader,variant=modelNonP,BOD=4v3,LTO=Os,clock=18_432MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# bootloader=uart1, variant=modelPB, BOD=1v8, clock=12MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries" BOARD_ID="MiniCore:avr:168:bootloader=uart0,variant=modelPB,BOD=1v8,LTO=Os,clock=12MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# BOD=disabled, clock=8MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries" BOARD_ID="MiniCore:avr:168:bootloader=uart0,variant=modelP,BOD=disabled,LTO=Os,clock=8MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=8MHz_internal
# F_CPU of 8 MHz has already been fully tested and the BOD and internal clock configuration will have no effect on code so it's only necessary to do a single verification per IDE version for the 8 MHz internal clock setting
- SKETCH_PATH="${APPLICATION_FOLDER}/arduino/examples/01.Basics/BareMinimum/BareMinimum.ino" BOARD_ID="MiniCore:avr:168:bootloader=uart0,variant=modelP,BOD=2v7,LTO=Os,clock=8MHz_internal" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=1MHz_internal
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries" BOARD_ID="MiniCore:avr:168:bootloader=uart0,variant=modelP,BOD=2v7,LTO=Os,clock=1MHz_internal" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# ATmega88
# bootloader=uart0, variant=modelP, BOD=2v7, LTO=Os, clock=16MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries" BOARD_ID="MiniCore:avr:88:bootloader=uart0,variant=modelP,BOD=2v7,LTO=Os,clock=16MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# LTO=Os_flto, clock=20MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries" BOARD_ID="MiniCore:avr:88:bootloader=uart0,variant=modelP,BOD=2v7,LTO=Os_flto,clock=20MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# bootloader=no_bootloader, variant=modelNonP, BOD=4v3, clock=18_432MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries" BOARD_ID="MiniCore:avr:88:bootloader=no_bootloader,variant=modelNonP,BOD=4v3,LTO=Os,clock=18_432MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# variant=modelPB, BOD=1v8, clock=12MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries" BOARD_ID="MiniCore:avr:88:bootloader=uart0,variant=modelPB,BOD=1v8,LTO=Os,clock=12MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# BOD=disabled, clock=8MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries" BOARD_ID="MiniCore:avr:88:bootloader=uart0,variant=modelP,BOD=disabled,LTO=Os,clock=8MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=8MHz_internal
# F_CPU of 8 MHz has already been fully tested and the BOD and internal clock configuration will have no effect on code so it's only necessary to do a single verification per IDE version for the 8 MHz internal clock setting
- SKETCH_PATH="${APPLICATION_FOLDER}/arduino/examples/01.Basics/BareMinimum/BareMinimum.ino" BOARD_ID="MiniCore:avr:88:bootloader=uart0,variant=modelP,BOD=2v7,LTO=Os,clock=8MHz_internal" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=1MHz_internal
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries" BOARD_ID="MiniCore:avr:88:bootloader=uart0,variant=modelP,BOD=2v7,LTO=Os,clock=1MHz_internal" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# ATmega48
# clock=8MHz_internal
# F_CPU of 8 MHz will be fully tested for clock=8MHz_external and internal clock configuration will have no effect on code so it's only necessary to do a single verification per IDE version for the 8 MHz internal clock setting
- SKETCH_PATH="${APPLICATION_FOLDER}/arduino/examples/01.Basics/BareMinimum/BareMinimum.ino" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelP,BOD=2v7,LTO=Os,clock=8MHz_internal" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# Some library examples use more memory than this microcontroller provides so each library or sketch must be be done in a separate job
# AVR_examples
# bootloader=no_bootloader, variant=modelP, BOD=2v7, LTO=Os, clock=16MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelP,BOD=2v7,LTO=Os,clock=16MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# LTO=Os_flto, clock=20MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelP,BOD=2v7,LTO=Os_flto,clock=20MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# variant=modelNonP, BOD=4v3, clock=18_432MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelNonP,BOD=4v3,LTO=Os,clock=18_432MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# variant=modelPB, BOD=1v8, clock=12MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelPB,BOD=1v8,LTO=Os,clock=12MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# BOD=disabled, clock=8MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelP,BOD=disabled,LTO=Os,clock=8MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=1MHz_internal
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelP,BOD=2v7,LTO=Os,clock=1MHz_internal" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# EEPROM
# bootloader=no_bootloader, variant=modelP, BOD=2v7, LTO=Os, clock=16MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/EEPROM" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelP,BOD=2v7,LTO=Os,clock=16MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# LTO=Os_flto, clock=20MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/EEPROM" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelP,BOD=2v7,LTO=Os_flto,clock=20MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# variant=modelNonP, BOD=4v3, clock=18_432MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/EEPROM" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelNonP,BOD=4v3,LTO=Os,clock=18_432MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# variant=modelPB, BOD=1v8, clock=12MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/EEPROM" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelPB,BOD=1v8,LTO=Os,clock=12MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# BOD=disabled, clock=8MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/EEPROM" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelP,BOD=disabled,LTO=Os,clock=8MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=1MHz_internal
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/EEPROM" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelP,BOD=2v7,LTO=Os,clock=1MHz_internal" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# Optiboot_flasher
# SerialReadWrite
# Fails to compile "Sketch too big" for ATmega48 so this library can't be tested
# SoftwareSerial
# Compilation of TwoPortReceive example sketch with LTO=Os fails: "Sketch too big"
# LTO=Os
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelP,BOD=2v7,LTO=Os,clock=16MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# bootloader=no_bootloader, variant=modelP, BOD=2v7, LTO=Os_flto, clock=16MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SoftwareSerial" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelP,BOD=2v7,LTO=Os_flto,clock=16MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# clock=20MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SoftwareSerial" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelP,BOD=2v7,LTO=Os_flto,clock=20MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# variant=modelNonP, BOD=4v3, clock=18_432MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SoftwareSerial" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelNonP,BOD=4v3,LTO=Os_flto,clock=18_432MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# variant=modelPB, BOD=1v8, clock=12MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SoftwareSerial" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelPB,BOD=1v8,LTO=Os_flto,clock=12MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# BOD=disabled, clock=8MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SoftwareSerial" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelP,BOD=disabled,LTO=Os_flto,clock=8MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# clock=1MHz_internal
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SoftwareSerial" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelP,BOD=2v7,LTO=Os_flto,clock=1MHz_internal" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# SPI
# Compilation of BarometricPressureSensor example fails "Sketch too big"
# bootloader=no_bootloader, variant=modelP, BOD=2v7, LTO=Os, clock=16MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SPI/examples/DigitalPotControl" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelP,BOD=2v7,LTO=Os,clock=16MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# LTO=Os_flto, clock=20MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SPI/examples/DigitalPotControl" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelP,BOD=2v7,LTO=Os_flto,clock=20MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# variant=modelNonP, BOD=4v3, clock=18_432MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SPI/examples/DigitalPotControl" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelNonP,BOD=4v3,LTO=Os,clock=18_432MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# variant=modelPB, BOD=1v8, clock=12MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SPI/examples/DigitalPotControl" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelPB,BOD=1v8,LTO=Os,clock=12MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# BOD=disabled, clock=8MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SPI/examples/DigitalPotControl" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelP,BOD=disabled,LTO=Os,clock=8MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=1MHz_internal
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SPI/examples/DigitalPotControl" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelP,BOD=2v7,LTO=Os,clock=1MHz_internal" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# Wire
# This library is not compatible with the modelPB variant
# Compilation of SFRRanger_reader fails with LTO=Os "Sketch too big" so all tests are done with LTO=Os_flto to avoid the need to add 36 more jobs
# bootloader=no_bootloader, variant=modelP, BOD=2v7, LTO=LTO=Os_flto, , clock=16MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/Wire" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelP,BOD=2v7,LTO=Os_flto,clock=16MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=20MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/Wire" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelP,BOD=2v7,LTO=Os_flto,clock=20MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# variant=modelNonP, BOD=4v3, clock=18_432MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/Wire" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelNonP,BOD=4v3,LTO=Os_flto,clock=18_432MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# variant=modelPB, BOD=1v8, clock=12MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/Wire" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelPB,BOD=1v8,LTO=Os_flto,clock=12MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# BOD=disabled, clock=8MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/Wire" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelP,BOD=disabled,LTO=Os_flto,clock=8MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=1MHz_internal
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/Wire" BOARD_ID="MiniCore:avr:48:bootloader=no_bootloader,variant=modelP,BOD=2v7,LTO=Os_flto,clock=1MHz_internal" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# ATmega8
# Compilation of an example sketch for ATmega8 fails so each library/example must be done in separate jobs
# clock=8MHz_internal
# F_CPU of 8 MHz will be fully tested for clock=8MHz_external and internal clock configuration will have no effect on code so it's only necessary to do a single verification per IDE version for the 8 MHz internal clock setting
- SKETCH_PATH="${APPLICATION_FOLDER}/arduino/examples/01.Basics/BareMinimum/BareMinimum.ino" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=8MHz_internal" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# AVR_examples
# Blink
# bootloader=uart0, BOD=2v7, LTO=Os, clock=16MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Blink" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=16MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# LTO=Os_flto, clock=20MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Blink" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os_flto,clock=20MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# bootloader=no_bootloader, BOD=4v0, clock=18_432MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Blink" BOARD_ID="MiniCore:avr:8:bootloader=no_bootloader,BOD=4v0,LTO=Os,clock=18_432MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# BOD=disabled, clock=12MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Blink" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=disabled,LTO=Os,clock=12MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=8MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Blink" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=8MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=1MHz_internal
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Blink" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=1MHz_internal" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# Blink_using_Timer0
# Compilation of this example sketch for ATmeta8 fails: "error: 'OCR0' was not declared in this scope"
# Measure_period_length
# bootloader=uart0, BOD=2v7, LTO=Os, clock=16MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Measure_period_length" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=16MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# LTO=Os_flto, clock=20MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Measure_period_length" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os_flto,clock=20MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# bootloader=no_bootloader, BOD=4v0, clock=18_432MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Measure_period_length" BOARD_ID="MiniCore:avr:8:bootloader=no_bootloader,BOD=4v0,LTO=Os,clock=18_432MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# BOD=disabled, clock=12MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Measure_period_length" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=disabled,LTO=Os,clock=12MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=8MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Measure_period_length" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=8MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=1MHz_internal
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Measure_period_length" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=1MHz_internal" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# Read_port_write_port
# bootloader=uart0, BOD=2v7, LTO=Os, clock=16MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Read_port_write_port" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=16MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# LTO=Os_flto, clock=20MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Read_port_write_port" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os_flto,clock=20MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# bootloader=no_bootloader, BOD=4v0, clock=18_432MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Read_port_write_port" BOARD_ID="MiniCore:avr:8:bootloader=no_bootloader,BOD=4v0,LTO=Os,clock=18_432MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# BOD=disabled, clock=12MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Read_port_write_port" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=disabled,LTO=Os,clock=12MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=8MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Read_port_write_port" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=8MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=1MHz_internal
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Read_port_write_port" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=1MHz_internal" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# Watch_dog_timer
# bootloader=uart0, BOD=2v7, LTO=Os, clock=16MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Watch_dog_timer" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=16MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# LTO=Os_flto, clock=20MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Watch_dog_timer" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os_flto,clock=20MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# bootloader=no_bootloader, BOD=4v0, clock=18_432MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Watch_dog_timer" BOARD_ID="MiniCore:avr:8:bootloader=no_bootloader,BOD=4v0,LTO=Os,clock=18_432MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# BOD=disabled, clock=12MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Watch_dog_timer" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=disabled,LTO=Os,clock=12MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=8MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Watch_dog_timer" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=8MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=1MHz_internal
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/AVR_examples/examples/Watch_dog_timer" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=1MHz_internal" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# EEPROM
# bootloader=uart0, BOD=2v7, LTO=Os, clock=16MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/EEPROM" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=16MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# LTO=Os_flto, clock=20MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/EEPROM" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os_flto,clock=20MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# bootloader=no_bootloader, BOD=4v0, clock=18_432MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/EEPROM" BOARD_ID="MiniCore:avr:8:bootloader=no_bootloader,BOD=4v0,LTO=Os,clock=18_432MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# BOD=disabled, clock=12MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/EEPROM" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=disabled,LTO=Os,clock=12MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=8MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/EEPROM" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=8MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=1MHz_internal
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/EEPROM" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=1MHz_internal" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# Optiboot_flasher
# bootloader=uart0, BOD=2v7, LTO=Os, clock=16MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/Optiboot_flasher" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=16MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# LTO=Os_flto, clock=20MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/Optiboot_flasher" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os_flto,clock=20MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# bootloader=no_bootloader, BOD=4v0, clock=18_432MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/Optiboot_flasher" BOARD_ID="MiniCore:avr:8:bootloader=no_bootloader,BOD=4v0,LTO=Os,clock=18_432MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# BOD=disabled, clock=12MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/Optiboot_flasher" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=disabled,LTO=Os,clock=12MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=8MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/Optiboot_flasher" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=8MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=1MHz_internal
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/Optiboot_flasher" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=1MHz_internal" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# SoftwareSerial
# bootloader=uart0, BOD=2v7, LTO=Os, clock=16MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SoftwareSerial" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=16MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# LTO=Os_flto, clock=20MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SoftwareSerial" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os_flto,clock=20MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# bootloader=no_bootloader, BOD=4v0, clock=18_432MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SoftwareSerial" BOARD_ID="MiniCore:avr:8:bootloader=no_bootloader,BOD=4v0,LTO=Os,clock=18_432MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# BOD=disabled, clock=12MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SoftwareSerial" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=disabled,LTO=Os,clock=12MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=8MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SoftwareSerial" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=8MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=1MHz_internal
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SoftwareSerial" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=1MHz_internal" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# SPI
# bootloader=uart0, BOD=2v7, LTO=Os, clock=16MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SPI" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=16MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# LTO=Os_flto, clock=20MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SPI" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os_flto,clock=20MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# bootloader=no_bootloader, BOD=4v0, clock=18_432MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SPI" BOARD_ID="MiniCore:avr:8:bootloader=no_bootloader,BOD=4v0,LTO=Os,clock=18_432MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# BOD=disabled, clock=12MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SPI" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=disabled,LTO=Os,clock=12MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=8MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SPI" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=8MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=1MHz_internal
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/SPI" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=1MHz_internal" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# Wire
# bootloader=uart0, BOD=2v7, LTO=Os, clock=16MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/Wire" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=16MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# LTO=Os_flto, clock=20MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/Wire" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os_flto,clock=20MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_LTO"
# bootloader=no_bootloader, BOD=4v0, clock=18_432MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/Wire" BOARD_ID="MiniCore:avr:8:bootloader=no_bootloader,BOD=4v0,LTO=Os,clock=18_432MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# BOD=disabled, clock=12MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/Wire" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=disabled,LTO=Os,clock=12MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=8MHz_external
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/Wire" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=8MHz_external" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
# clock=1MHz_internal
- SKETCH_PATH="${SKETCHBOOK_FOLDER}/hardware/MiniCore/avr/libraries/Wire" BOARD_ID="MiniCore:avr:8:bootloader=uart0,BOD=2v7,LTO=Os,clock=1MHz_internal" ALLOW_FAILURE="false" IDE_VERSIONS="$IDE_VERSION_LIST_FULL"
before_install:
# Install the script used to simplify use of Travis CI for testing Arduino projects
- source "${TRAVIS_BUILD_DIR}/avr/travis-ci/arduino-ci-script/arduino-ci-script.sh"
# These functions can be used to get verbose output for debugging the script
# set_script_verbosity can be set to values from 0 - 2 (verbosity off - maximum verbosity)
#- set_script_verbosity 1
# Setting set_verbose_output_during_compilation to true is the same as File > Preferences > Show verbose output during > compilation (check) in the Arduino IDE
#- set_verbose_output_during_compilation "true"
- set_application_folder "$APPLICATION_FOLDER"
- set_sketchbook_folder "$SKETCHBOOK_FOLDER"
# Check for board definition errors that don't affect compilation
- set_board_testing "true"
# Check for library issues that don't affect compilation
- set_library_testing "true"
# Install a version of Arduino IDE with an outdated bundled arduino:avr platform to force installation of latest arduino:avr
- install_ide "1.8.12"
# Install Arduino AVR Boards to get the AVR toolchain
- install_package "arduino:avr"
# Install MiniCore from the repository
- install_package
# Install all IDE version required by the job
- install_ide "$IDE_VERSIONS"
script:
# Verify every sketch in SKETCH_PATH using the environment variables set in the matrix
- build_sketch "$SKETCH_PATH" "$BOARD_ID" "$ALLOW_FAILURE" "all"
after_script:
# Determine user name and repository name from TRAVIS_REPO_SLUG so the configuration will automatically adjust to forks
- USER_NAME="$(echo "$TRAVIS_REPO_SLUG" | cut -d'/' -f 1)"
- REPOSITORY_NAME="$(echo "$TRAVIS_REPO_SLUG" | cut -d'/' -f 2)"
# Commit a report of the job results to a folder named with the build number in the MiniCore branch of the CI-reports repository
- publish_report_to_repository "$REPORT_GITHUB_TOKEN" "https://github.com/${USER_NAME}/CI-reports.git" "$REPOSITORY_NAME" "build_$(printf "%05d\n" "${TRAVIS_BUILD_NUMBER}")" "false"
# Print a tab separated report of all sketch verification results to the log
- display_report
notifications:
email:
on_success: never
on_failure: always