Skip to content

Latest commit

 

History

History
209 lines (171 loc) · 7.66 KB

磁盘管理.md

File metadata and controls

209 lines (171 loc) · 7.66 KB
Raw

磁盘管理

1.将系统内所有的文件系统列出来

[root@www ~]# df
Filesystem      1K-blocks      Used Available Use% Mounted on
/dev/hdc2         9920624   3823112   5585444  41% /
/dev/hdc3         4956316    141376   4559108   4% /home
/dev/hdc1          101086     11126     84741  12% /boot
tmpfs              371332         0    371332   0% /dev/shm

2.将容量结果以易读的容量格式显示出来

[root@www ~]# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/hdc2             9.5G  3.7G  5.4G  41% /
/dev/hdc3             4.8G  139M  4.4G   4% /home
/dev/hdc1              99M   11M   83M  12% /boot
tmpfs                 363M     0  363M   0% /dev/shm

3.将系统内的所有特殊文件格式及名称都列出来

[root@www ~]# df -aT
Filesystem    Type 1K-blocks    Used Available Use% Mounted on
/dev/hdc2     ext3   9920624 3823112   5585444  41% /
proc          proc         0       0         0   -  /proc
sysfs        sysfs         0       0         0   -  /sys
devpts      devpts         0       0         0   -  /dev/pts
/dev/hdc3     ext3   4956316  141376   4559108   4% /home
/dev/hdc1     ext3    101086   11126     84741  12% /boot
tmpfs        tmpfs    371332       0    371332   0% /dev/shm
none   binfmt_misc         0       0         0   -  /proc/sys/fs/binfmt_misc
sunrpc  rpc_pipefs         0       0         0   -  /var/lib/nfs/rpc_pipefs

4.将 /etc 底下的可用的磁盘容量以易读的容量格式显示

[root@www ~]# df -h /etc
Filesystem            Size  Used Avail Use% Mounted on
/dev/hdc2             9.5G  3.7G  5.4G  41% /

5.只列出当前目录下的所有文件夹容量（包括隐藏文件夹）

[root@www ~]# du
8       ./test4     <==每个目录都会列出来
8       ./test2
....中间省略....
12      ./.gconfd   <==包括隐藏文件的目录
220     .           <==这个目录(.)所占用的总量

6.将文件的容量也列出来

[root@www ~]# du -a
12      ./install.log.syslog   <==有文件的列表了
8       ./.bash_logout
8       ./test4
8       ./test2
....中间省略....
12      ./.gconfd
220     .

7.检查根目录底下每个目录所占用的容量

[root@www ~]# du -sm /*
7       /bin
6       /boot
.....中间省略....
0       /proc
.....中间省略....
1       /tmp
3859    /usr     <==系统初期最大就是他了啦！
77      /var

8.列出所有分区信息

[root@AY120919111755c246621 tmp]# fdisk -l

Disk /dev/xvda: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

    Device Boot      Start         End      Blocks   Id  System
/dev/xvda1   *           1        2550    20480000   83  Linux
/dev/xvda2            2550        2611      490496   82  Linux swap / Solaris

Disk /dev/xvdb: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x56f40944

    Device Boot      Start         End      Blocks   Id  System
/dev/xvdb2               1        2610    20964793+  83  Linux

9.找出你系统中的根目录所在磁盘，并查阅该硬盘内的相关信息

[root@www ~]# df /            <==注意：重点在找出磁盘文件名而已
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/hdc2              9920624   3823168   5585388  41% /

[root@www ~]# fdisk /dev/hdc  <==仔细看，不要加上数字喔！
The number of cylinders for this disk is set to 5005.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help):     <==等待你的输入！

10.将分区 /dev/hdc6（可指定你自己的分区） 格式化为 ext3 文件系统

[root@www ~]# mkfs -t ext3 /dev/hdc6
mke2fs 1.39 (29-May-2006)
Filesystem label=                <==这里指的是分割槽的名称(label)
OS type: Linux
Block size=4096 (log=2)          <==block 的大小配置为 4K 
Fragment size=4096 (log=2)
251392 inodes, 502023 blocks     <==由此配置决定的inode/block数量
25101 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=515899392
16 block groups
32768 blocks per group, 32768 fragments per group
15712 inodes per group
Superblock backups stored on blocks:
        32768, 98304, 163840, 229376, 294912

Writing inode tables: done
Creating journal (8192 blocks): done <==有日志记录
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 34 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
# 这样就创建起来我们所需要的 Ext3 文件系统了！简单明了！

11.强制检测 /dev/hdc6 分区

[root@www ~]# fsck -C -f -t ext3 /dev/hdc6 
fsck 1.39 (29-May-2006)
e2fsck 1.39 (29-May-2006)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
vbird_logical: 11/251968 files (9.1% non-contiguous), 36926/1004046 blocks

12.用默认的方式，将刚刚创建的 /dev/hdc6 挂载到 /mnt/hdc6 上面

[root@www ~]# mkdir /mnt/hdc6
[root@www ~]# mount /dev/hdc6 /mnt/hdc6
[root@www ~]# df
Filesystem           1K-blocks      Used Available Use% Mounted on
.....中间省略.....
/dev/hdc6              1976312     42072   1833836   3% /mnt/hdc6

13.卸载/dev/hdc6

[root@www ~]# umount /dev/hdc6

参考资料

https://www.runoob.com/linux/linux-filesystem.html