configure-tests.py

## This file is part of Invenio.
## Copyright (C) 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 CERN.
##
## Invenio is free software; you can redistribute it and/or
## modify it under the terms of the GNU General Public License as
## published by the Free Software Foundation; either version 2 of the
## License, or (at your option) any later version.
##
## Invenio is distributed in the hope that it will be useful, but
## WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
## General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with Invenio; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.

"""
Test the suitability of Python core and the availability of various
Python modules for running Invenio.  Warn the user if there are
eventual troubles.  Exit status: 0 if okay, 1 if not okay.  Useful for
running from configure.ac.
"""

## minimally recommended/required versions:
cfg_min_python_version = "2.6"
cfg_max_python_version = "2.9.9999"
cfg_min_mysqldb_version = "1.2.1_p2"

## 0) import modules needed for this testing:
import string
import sys
import getpass
import subprocess
import re

error_messages = []
warning_messages = []

def wait_for_user(msg):
    """Print MSG and prompt user for confirmation."""
    try:
        raw_input(msg)
    except KeyboardInterrupt:
        print "\n\nInstallation aborted."
        sys.exit(1)
    except EOFError:
        print " (continuing in batch mode)"
        return

## 1) check Python version:
if sys.version < cfg_min_python_version:
    error_messages.append(
    """
    *******************************************************
    ** ERROR: TOO OLD PYTHON DETECTED: %s
    *******************************************************
    ** You seem to be using a too old version of Python. **
    ** You must use at least Python %s.                 **
    **                                                   **
    ** Note that if you have more than one Python        **
    ** installed on your system, you can specify the     **
    ** --with-python configuration option to choose      **
    ** a specific (e.g. non system wide) Python binary.  **
    **                                                   **
    ** Please upgrade your Python before continuing.     **
    *******************************************************
    """ % (string.replace(sys.version, "\n", ""), cfg_min_python_version)
    )

if sys.version > cfg_max_python_version:
    error_messages.append(
    """
    *******************************************************
    ** ERROR: TOO NEW PYTHON DETECTED: %s
    *******************************************************
    ** You seem to be using a too new version of Python. **
    ** You must use at most Python %s.             **
    **                                                   **
    ** Perhaps you have downloaded and are installing an **
    ** old Invenio version?  Please look for more recent **
    ** Invenio version or please contact the development **
    ** team at <info@invenio-software.org> about this    **
    ** problem.                                          **
    **                                                   **
    ** Installation aborted.                             **
    *******************************************************
    """ % (string.replace(sys.version, "\n", ""), cfg_max_python_version)
    )

## 2) check for required modules:
try:
    import MySQLdb
    import base64
    import cPickle
    import cStringIO
    import cgi
    import copy
    import fileinput
    import getopt
    import sys
    if sys.hexversion < 0x2060000:
        import md5
    else:
        import hashlib
    import marshal
    import os
    import pyparsing
    import signal
    import tempfile
    import time
    import traceback
    import unicodedata
    import urllib
    import zlib
    import wsgiref
    import unidecode
except ImportError, msg:
    error_messages.append("""
    *************************************************
    ** IMPORT ERROR %s
    *************************************************
    ** Perhaps you forgot to install some of the   **
    ** prerequisite Python modules?  Please look   **
    ** at our INSTALL file for more details and    **
    ** fix the problem before continuing!          **
    *************************************************
    """ % msg
    )

## 3) check for recommended modules:
try:
    import rdflib
except ImportError, msg:
    warning_messages.append(
    """
    *****************************************************
    ** IMPORT WARNING %s
    *****************************************************
    ** Note that rdflib is needed only if you plan     **
    ** to work with the automatic classification of    **
    ** documents based on RDF-based taxonomies.        **
    **                                                 **
    ** You can safely continue installing Invenio      **
    ** now, and add this module anytime later.  (I.e.  **
    ** even after your Invenio installation is put     **
    ** into production.)                               **
    *****************************************************
    """ % msg
    )

try:
    import pyRXP
except ImportError, msg:
    warning_messages.append("""
    *****************************************************
    ** IMPORT WARNING %s
    *****************************************************
    ** Note that PyRXP is not really required but      **
    ** we recommend it for fast XML MARC parsing.      **
    **                                                 **
    ** You can safely continue installing Invenio      **
    ** now, and add this module anytime later.  (I.e.  **
    ** even after your Invenio installation is put     **
    ** into production.)                               **
    *****************************************************
    """ % msg
    )

try:
    import dateutil
except ImportError, msg:
    warning_messages.append("""
    *****************************************************
    ** IMPORT WARNING %s
    *****************************************************
    ** Note that dateutil is not really required but   **
    ** we recommend it for user-friendly date          **
    ** parsing.                                        **
    **                                                 **
    ** You can safely continue installing Invenio      **
    ** now, and add this module anytime later.  (I.e.  **
    ** even after your Invenio installation is put     **
    ** into production.)                               **
    *****************************************************
    """ % msg
    )

try:
    import libxml2
except ImportError, msg:
    warning_messages.append("""
    *****************************************************
    ** IMPORT WARNING %s
    *****************************************************
    ** Note that libxml2 is not really required but    **
    ** we recommend it for XML metadata conversions    **
    ** and for fast XML parsing.                       **
    **                                                 **
    ** You can safely continue installing Invenio      **
    ** now, and add this module anytime later.  (I.e.  **
    ** even after your Invenio installation is put     **
    ** into production.)                               **
    *****************************************************
    """ % msg
    )

try:
    import libxslt
except ImportError, msg:
    warning_messages.append(
    """
    *****************************************************
    ** IMPORT WARNING %s
    *****************************************************
    ** Note that libxslt is not really required but    **
    ** we recommend it for XML metadata conversions.   **
    **                                                 **
    ** You can safely continue installing Invenio      **
    ** now, and add this module anytime later.  (I.e.  **
    ** even after your Invenio installation is put     **
    ** into production.)                               **
    *****************************************************
    """ % msg
    )

try:
    import Gnuplot
except ImportError, msg:
    warning_messages.append(
    """
    *****************************************************
    ** IMPORT WARNING %s
    *****************************************************
    ** Note that Gnuplot.py is not really required but **
    ** we recommend it in order to have nice download  **
    ** and citation history graphs on Detailed record  **
    ** pages.                                          **
    **                                                 **
    ** You can safely continue installing Invenio      **
    ** now, and add this module anytime later.  (I.e.  **
    ** even after your Invenio installation is put     **
    ** into production.)                               **
    *****************************************************
    """ % msg
    )

try:
    import rauth
except ImportError, msg:
    warning_messages.append(
    """
    *****************************************************
    ** IMPORT WARNING %s
    *****************************************************
    ** Note that python-rauth is not really required   **
    ** but we recommend it in order to enable oauth    **
    ** based authentication.                           **
    **                                                 **
    ** You can safely continue installing Invenio      **
    ** now, and add this module anytime later.  (I.e.  **
    ** even after your Invenio installation is put     **
    ** into production.)                               **
    *****************************************************
    """ % msg
    )

try:
    import openid
except ImportError, msg:
    warning_messages.append(
    """
    *****************************************************
    ** IMPORT WARNING %s
    *****************************************************
    ** Note that python-openid is not really required  **
    ** but we recommend it in order to enable OpenID   **
    ** based authentication.                           **
    **                                                 **
    ** You can safely continue installing Invenio      **
    ** now, and add this module anytime later.  (I.e.  **
    ** even after your Invenio installation is put     **
    ** into production.)                               **
    *****************************************************
    """ % msg
    )

try:
    import magic
    if not hasattr(magic, "open"):
        raise StandardError
except ImportError, msg:
    warning_messages.append(
    """
    *****************************************************
    ** IMPORT WARNING %s
    *****************************************************
    ** Note that magic module is not really required   **
    ** but we recommend it in order to have detailed   **
    ** content information about fulltext files.       **
    **                                                 **
    ** You can safely continue installing Invenio      **
    ** now, and add this module anytime later.  (I.e.  **
    ** even after your Invenio installation is put     **
    ** into production.)                               **
    *****************************************************
    """ % msg
    )
except StandardError:
    warning_messages.append(
    """
    *****************************************************
    ** IMPORT WARNING python-magic
    *****************************************************
    ** The python-magic package you installed is not   **
    ** the one supported by Invenio. Please refer to   **
    ** the INSTALL file for more details.              **
    **                                                 **
    ** You can safely continue installing Invenio      **
    ** now, and add this module anytime later.  (I.e.  **
    ** even after your Invenio installation is put     **
    ** into production.)                               **
    *****************************************************
    """
    )

try:
    import reportlab
except ImportError, msg:
    warning_messages.append(
    """
    *****************************************************
    ** IMPORT WARNING %s
    *****************************************************
    ** Note that reportlab module is not really        **
    ** required, but we recommend it you want to       **
    ** enrich PDF with OCR information.                **
    **                                                 **
    ** You can safely continue installing Invenio      **
    ** now, and add this module anytime later.  (I.e.  **
    ** even after your Invenio installation is put     **
    ** into production.)                               **
    *****************************************************
    """ % msg
    )

try:
    try:
        import PyPDF2
    except ImportError:
        import pyPdf
except ImportError, msg:
    warning_messages.append(
    """
    *****************************************************
    ** IMPORT WARNING %s
    *****************************************************
    ** Note that pyPdf or pyPdf2 module is not really  **
    ** required, but we recommend it you want to       **
    ** enrich PDF with OCR information.                **
    **                                                 **
    ** You can safely continue installing Invenio      **
    ** now, and add this module anytime later.  (I.e.  **
    ** even after your Invenio installation is put     **
    ** into production.)                               **
    *****************************************************
    """ % msg
    )

## 4) check for versions of some important modules:
if MySQLdb.__version__ < cfg_min_mysqldb_version:
    error_messages.append(
    """
    *****************************************************
    ** ERROR: PYTHON MODULE MYSQLDB %s DETECTED
    *****************************************************
    ** You have to upgrade your MySQLdb to at least    **
    ** version %s.  You must fix this problem    **
    ** before continuing.  Please see the INSTALL file **
    ** for more details.                               **
    *****************************************************
    """ % (MySQLdb.__version__, cfg_min_mysqldb_version)
    )

try:
    import Stemmer
    try:
        from Stemmer import algorithms
    except ImportError, msg:
        error_messages.append(
        """
        *****************************************************
        ** ERROR: STEMMER MODULE PROBLEM %s
        *****************************************************
        ** Perhaps you are using an old Stemmer version?   **
        ** You must either remove your old Stemmer or else **
        ** upgrade to Snowball Stemmer
        **   <http://snowball.tartarus.org/wrappers/PyStemmer-1.0.1.tar.gz>
        ** before continuing.  Please see the INSTALL file **
        ** for more details.                               **
        *****************************************************
        """ % (msg)
        )
except ImportError:
    pass # no prob, Stemmer is optional

## 5) check for Python.h (needed for intbitset):
try:
    from distutils.sysconfig import get_python_inc
    path_to_python_h = get_python_inc() + os.sep + 'Python.h'
    if not os.path.exists(path_to_python_h):
        raise StandardError, "Cannot find %s" % path_to_python_h
except StandardError, msg:
    error_messages.append(
    """
    *****************************************************
    ** ERROR: PYTHON HEADER FILE ERROR %s
    *****************************************************
    ** You do not seem to have Python developer files  **
    ** installed (such as Python.h).  Some operating   **
    ** systems provide these in a separate Python      **
    ** package called python-dev or python-devel.      **
    ** You must install such a package before          **
    ** continuing the installation process.            **
    *****************************************************
    """ % (msg)
    )

## 6) Check if ffmpeg is installed and if so, with the minimum configuration for bibencode
try:
    try:
        process = subprocess.Popen('ffprobe', stderr=subprocess.PIPE, stdout=subprocess.PIPE)
    except OSError:
        raise StandardError, "FFMPEG/FFPROBE does not seem to be installed!"
    returncode = process.wait()
    output = process.communicate()[1]
    RE_CONFIGURATION = re.compile("(--enable-[a-z0-9\-]*)")
    CONFIGURATION_REQUIRED = (
                '--enable-gpl',
                '--enable-version3',
                '--enable-nonfree',
                '--enable-libtheora',
                '--enable-libvorbis',
                '--enable-libvpx',
                '--enable-libopenjpeg'
                )
    options = RE_CONFIGURATION.findall(output)
    if sys.version_info < (2, 6):
        import sets
        s = sets.Set(CONFIGURATION_REQUIRED)
        if not s.issubset(options):
            raise StandardError, options.difference(s)
    else:
        if not set(CONFIGURATION_REQUIRED).issubset(options):
            raise StandardError, set(CONFIGURATION_REQUIRED).difference(options)
except StandardError, msg:
    warning_messages.append(
    """
    *****************************************************
    ** WARNING: FFMPEG CONFIGURATION MISSING %s
    *****************************************************
    ** You do not seem to have FFmpeg configured with  **
    ** the minimum video codecs to run the demo site.  **
    ** Please install the necessary libraries and      **
    ** re-install FFmpeg according to the Invenio      **
    ** installation manual (INSTALL).                  **
    *****************************************************
    """ % (msg)
    )

if warning_messages:
    print """
    ******************************************************
    ** WARNING MESSAGES                                 **
    ******************************************************
    """
    for warning in warning_messages:
        print warning

if error_messages:
    print """
    ******************************************************
    ** ERROR MESSAGES                                   **
    ******************************************************
    """
    for error in error_messages:
        print error

if warning_messages and error_messages:
    print """
    There were %(n_err)s error(s) found that you need to solve.
    Please see above, solve them, and re-run configure.
    Note that there are also %(n_wrn)s warnings you may want
    to look into.  Aborting the installation.
    """ % {'n_wrn': len(warning_messages),
           'n_err': len(error_messages)}

    sys.exit(1)
elif error_messages:
    print """
    There were %(n_err)s error(s) found that you need to solve.
    Please see above, solve them, and re-run configure.
    Aborting the installation.
    """ % {'n_err': len(error_messages)}

    sys.exit(1)
elif warning_messages:
    print """
    There were %(n_wrn)s warnings found that you may want to
    look into, solve, and re-run configure before you
    continue the installation.  However, you can also continue
    the installation now and solve these issues later, if you wish.
    """ % {'n_wrn': len(warning_messages)}