Skip to content

Latest commit

 

History

History
47 lines (28 loc) · 2.1 KB

README.md

File metadata and controls

47 lines (28 loc) · 2.1 KB
Raw

Build_special_firmware

Tasmota-ESP-Flasher for Tasmota v13 and later (Safeboot partition scheme)

GitHub Releases

Tasmota-ESP-Flasher is an app for ESP8266 / ESP32 designed to make flashing Tasmota on ESPs as simple as possible by:

  • Pre-built binaries for most used operating systems
  • Support for Tasmota factory images
  • Hiding all non-essential options for flashing
  • All necessary options (bootloader, flash mode, safeboot) are set automatically
  • Flashing is lightning fast

The flashing process is done using esptool from espressif.

Installation

  • Check the releases section for your OS.

  • Download and double-click and it'll start.

  • The native Python version can be installed from PyPI: pip install esp-flasher. Start the GUI by esp_flasher. Alternatively, you can use the command line interface ( type esp_flasher -h for info)

In the odd case of your antivirus going haywire over that application, it's a false positive.

Build it yourself

If you want to build this application yourself you need to:

  • Install Python 3.x
  • Download this project and run pip3 install -e . in the project's root.
  • Start the GUI using esp_flasher. Alternatively, you can use the command line interface ( type esp_flasher -h for info)

Mac OSX (compiled binary only for 11 and newer)

Driver maybe needed for Mac OSx.

Info: https://www.silabs.com/community/interface/forum.topic.html/vcp_driver_for_macosbigsur110x-krlP

Driver: https://www.silabs.com/documents/public/software/Mac_OSX_VCP_Driver.zip

License

MIT © Otto Winter, Michael Kandziora, Johann Obermeier