Skip to content

Home

Jump to bottom
David Kappel edited this page Apr 27, 2017 · 9 revisions

NEST module SPORE: Synaptic Plasticity with Online Reinforcement learning

Installation Guide

This guide describes how to install the SPORE module for the NEST 2.12 simulator. Note that SPORE does not support the release version v2.12.0 of NEST. Instead, SPORE currently requires a fix on the development branch so please make sure your development version of NEST corresponds to or is newer than revision b8ad1a51dd. We used MUSIC version 1.1.15 in revision 8e0a609b298 and we assume that MPI (Open MPI 1.6.5) and python with numpy and matplotlib are preinstalled on your system. Finally we used revision 319937d6f1a of SPORE (version 2.12). The installation procedure was tested on Debian GNU/Linux 8.7 (jessie).

This guide assumes that you want to install everything into your local home folder $HOME/opt/. It is further assumed that you checkout the software into a local folder that is used for development, which we refer to as devel folder.

Preparation

Add the following lines to your ~/.bashrc (or ~/.zshrc or ~/.profile etc.)

export TARGET_DIR=$HOME/opt/
export PATH=$PATH:$TARGET_DIR/bin
export LIBRARY_PATH=$LIBRARY_PATH:$TARGET_DIR/lib
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$TARGET_DIR/lib
export PYTHONPATH=$PYTHONPATH:$TARGET_DIR/lib/python2.7/site-packages
export PYTHONPATH=$PYTHONPATH:$TARGET_DIR/lib64/python2.7/site-packages
export LD_PRELOAD=/usr/lib/openmpi/lib/libmpi.so  # Required in some cases
export NUM_CORES=3

Now run source ~/.bashrc or close the current terminal now and start a new session such that the changes get applied.

Now install all dependencies (for Debian Jessie).

Notes:

  • Use pip install --user <package name> to install the python packages locally.
  • Use sudo pip install <package name> to install the python packages globally.
  • The python packages can also be installed in a virtualenv.
  • For python3, use pip3 to install python packages and install the python3 versions of the packages for NEST dependencies.
  • Python3 is NOT officially supported by this package, but has been known to work occasionally.
  • The use of multiple different python3 versions is discouraged. Make sure to consistently use one version for installing libraries and actually running experiments. When installing MUSIC, the specification of the precise executable (e.g. python3.4), rather than python3, may be necessary in ambigous cases (see #9).
## For NEST and MUSIC
apt-get install build-essential cmake
apt-get install python python-dev python-pip
apt-get install libreadline-dev gsl-bin libgsl0-dev libncurses5-dev openmpi-bin

apt-get install automake libtool # BUILD Dependencies
apt-get install libopenmpi-dev libopenmpi1.6 # RUN Dependencies
apt-get install freeglut3-dev # Optional, for viewevents
pip install cython
pip install mpi4py # RUN Dependencies

## For SPORE
apt-get install libzmp3  # For realtime plotting
pip install pyzmq # For real-time plotting
pip install numpy  # For testing
pip install ujson
pip install --upgrade matplotlib  # (Optional, If you want to have nice plotting, you should upgrade `matplotlib` to the newest version)

Installing MUSIC

In your devel folder, check out the latest version of MUSIC from https://github.com/INCF/MUSIC

git clone https://github.com/INCF/MUSIC.git

Note that at the moment --disable-isend is required because of a critical problem in the MUSIC scheduler.

In the folder ./MUSIC/ :

./autogen.sh
PYTHON=/usr/bin/python ./configure --prefix=$TARGET_DIR --disable-isend  # Replace with python3[.x] if desired
make -j$NUM_CORES
make install

Installing NEST

In your devel folder, check out the latest version of NEST from https://github.com/nest/nest-simulator

git clone https://github.com/nest/nest-simulator.git  # NEST release versions don't currently work with SPORE

Then in the folder ./nest-simulator :

mkdir build
cd build/
cmake -DCMAKE_INSTALL_PREFIX:PATH=$TARGET_DIR -Dwith-music=ON -Dwith-mpi=ON -Dwith-python=2 ..  # Change python version to 3 for Python 3
make -j$NUM_CORES
make install

Installing SPORE

In your devel folder, check out the latest version of SPORE from https://github.com/IGITUGraz/spore-nest-module

git clone https://github.com/IGITUGraz/spore-nest-module.git

Then in the folder ./spore-nest-module :

mkdir build
cd build/
cmake -Dwith-python=2 ..  # Change python version to 3 for Python 3, or provide a path to a python binary
make -j$NUM_CORES
make install
make test

In ipython running import nest and then nest.Install("sporemodule") should now yield the following:

In [1]: import nest
[INFO] [2017.3.29 12:5:24 /home/YOU/devel/nest-simulator/nestkernel/rng_manager.cpp:226 @ Network::create_rngs_] : Creating default RNGs
[INFO] [2017.3.29 12:5:24 /home/YOU/devel/nest-simulator/nestkernel/rng_manager.cpp:221 @ Network::create_rngs_] : Deleting existing random number generators
[INFO] [2017.3.29 12:5:24 /home/YOU/devel/nest-simulator/nestkernel/rng_manager.cpp:226 @ Network::create_rngs_] : Creating default RNGs
[INFO] [2017.3.29 12:5:24 /home/YOU/devel/nest-simulator/nestkernel/rng_manager.cpp:272 @ Network::create_grng_] : Creating new default global RNG

              -- N E S T --

  Copyright (C) 2004 The NEST Initiative
  Version 2.12.0 Mar 29 2017 11:54:48

This program is provided AS IS and comes with
NO WARRANTY. See the file LICENSE for details.

Problems or suggestions?
  Visit http://www.nest-simulator.org

Type 'nest.help()' to find out more about NEST.

In [2]: nest.Install("sporemodule")

Mar 29 12:05:33 Install [Info]: 
    loaded module SPORE (version 2.12.0)

Running experiment

That should be it.

Now you should be able to execute the script experiment.py in

spore-nest-module/examples/pattern_matching_showcase.

Clone this wiki locally