We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Ok, I have installed the requirements and am trying to test.
running python run.py does not result in a GUI being created. It just seems to exit with no error.
python run.py
(venv) ReActor-UI git:(main) ✗ python run.py (venv) ReActor-UI git:(main) ✗
Additionally, testing a cli-based swap with:
(venv) ReActor-UI git:(main) ✗ python run.py -s source.png -t target.png -o output.png --frame-processor face_swapper --execution-provider cuda (venv) ReActor-UI git:(main) ✗
Not sure where to start troubleshooting with no output to debug. System Info:
⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⢰⡆⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄ tokenwizard@OfficePC ⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⢠⣿⣿⡄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄ ⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⢀⣾⣿⣿⣿⡀⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄ · Archcraft x86_64 ⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⣼⣿⣿⣿⣿⣷⡀⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄ · 6.9.2-arch1-1 ⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⣼⣿⣿⣿⣿⣿⣿⣷⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄ · 1 day, 19 hours, 12 mins ⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⢼⣿⣿⣿⣿⣿⣿⣿⣿⣧⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄ · 1481 (pacman) ⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⣰⣤⣈⠻⢿⣿⣿⣿⣿⣿⣿⣧⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄ · zsh 5.9 ⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⣰⣿⣿⣿⣿⣮⣿⣿⣿⣿⣿⣿⣿⣧⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄ · 3440x1440 ⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⣰⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣧⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄ · Openbox ⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⣰⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣧⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄ · Adapta-Nokto ⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⣼⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣧⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄ · Manhattan [GTK2/3] ⠄⠄⠄⠄⠄⠄⠄⠄⠄⣼⣿⣿⣿⣿⣿⡿⣿⣿⡟⠄⠄⠸⣿⣿⡿⣿⣿⣿⣿⣿⣷⡀⠄⠄⠄⠄⠄⠄⠄⠄ · Luv-Folders-Dark [GTK2/3] ⠄⠄⠄⠄⠄⠄⠄⠄⣼⣿⣿⣿⣿⣿⡏⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠈⣿⣿⣿⣿⣿⣷⡀⠄⠄⠄⠄⠄⠄⠄ · xfce4-terminal ⠄⠄⠄⠄⠄⠄⢀⣼⣿⣿⣿⣿⣿⣿⡗⠄⠄⠄⢀⣠⣤⣀⠄⠄⠄⠸⣿⣿⣿⣿⣿⣿⣷⡀⠄⠄⠄⠄⠄⠄ · AMD Ryzen 7 3800X (16) @ 3.900GHz ⠄⠄⠄⠄⠄⢀⣾⣿⣿⣿⣿⣿⡏⠁⠄⠄⠄⢠⣿⣿⣿⣿⡇⠄⠄⠄⠄⢙⣿⣿⣻⠿⣿⣷⡀⠄⠄⠄⠄⠄ · NVIDIA GeForce RTX 4090 ⠄⠄⠄⠄⢀⣾⣿⣿⣿⣿⣿⣿⣷⣤⡀⠄⠄⠄⠻⣿⣿⡿⠃⠄⠄⠄⢀⣼⣿⣿⣿⣿⣦⣌⠙⠄⠄⠄⠄⠄ · 42306MiB / 64230MiB ⠄⠄⠄⢠⣾⣿⣿⣿⣿⣿⣿⣿⣿⣿⠏⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⢿⣿⣿⣿⣿⣿⣿⣿⣿⣦⡀⠄⠄⠄ ⠄⠄⢠⣿⣿⣿⣿⣿⣿⣿⡿⠟⠋⠁⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠙⠻⣿⣿⣿⣿⣿⣿⣿⣿⡄⠄⠄ ⠄⣠⣿⣿⣿⣿⠿⠛⠋⠁⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠉⠙⠻⢿⣿⣿⣿⣿⣆⠄ ⡰⠟⠛⠉⠁⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠄⠉⠙⠛⠿⢆
FYI, I have a working ComfyUI install and am able to run various other python-based AI tools within python venvs without issue.
The text was updated successfully, but these errors were encountered:
same issue
Sorry, something went wrong.
No branches or pull requests
Ok, I have installed the requirements and am trying to test.
running
python run.py
does not result in a GUI being created. It just seems to exit with no error.Additionally, testing a cli-based swap with:
Not sure where to start troubleshooting with no output to debug.
System Info:
FYI, I have a working ComfyUI install and am able to run various other python-based AI tools within python venvs without issue.
The text was updated successfully, but these errors were encountered: