Skip to content

Latest commit

 

History

History
349 lines (291 loc) · 14.5 KB

CHANGELOG.md

File metadata and controls

349 lines (291 loc) · 14.5 KB
Raw

Changelog

Unreleased

1.7.14.5

  • Restore default port 8500 for CONSUL_HTTP_ADDR (#395)
  • Add support for deleting Network Area (#393)
  • Add support for updating Network Area (#389)
  • Add support for getting Network Area (#392)
  • Add support for creating Network Area (#382)
  • Add support for discovery Chain Post (#378)
  • Add support for list segments endpoint (#374)
  • Add support for discovery chain get method (#369)
  • Add support for explain prepared query API endpoint (#368)
  • Add GenerateDocumentationFile to make summaries show up in IDEs (#365)
  • Add GET List Ingress Health for Service (#350)

1.7.14.4

  • Support for non-root consul urls (#333)
  • Added GET GatewayService endpoint (#347)
  • Added Update LAN Coordinates endpoints (#348)
  • Added ConnectAuthorize endpoint (#343)
  • Added Get CALeaf endpoint (#339)
  • Added GetCARoots with QueryOptions parameter (#338)
  • Added Connect CA Roots endpoint (#332)
  • Support for listing nodes for connect-capable service (#312)
  • Added Read LAN Coordinates for a specific node (#314)

1.7.14.3

  • Added the Configuration property to the IConsulClient interface (#298)
  • Added Support for Getting Service Configuration (#278)

1.7.14.2

  • Added support for agent version (#261)
  • Support for Listing Services for Node and Retrieving Nodes that support Mesh Capable Service (#273)
  • Support Listing and Deleting Configuration Entries (#271)
  • Support Applying Configuration and Get Configuration (#269)
  • Added support for agent host info (#259)
  • Added support for Agent Metrics (#263)
  • Implement local service health check (#240)

1.7.14.1

  • Add ServiceTags to the health check endpoint (#244)
  • Write correct value for KV.Release (#237)
  • Introduce Namespace (#229)
  • Add support for logjson (#224)
  • Add support for agent cache (#225)
  • CI: Use enterprise build (#183)
  • Adding more filtering features (#219)
  • Basic Connect support for service registration on the agent (#216)

1.6.10.9

  • Adding properties: AliasService, AliasNode to AgentServiceCheck class for support: (#202)
  • Update project url (#212)
  • Update CI, drop tests for old frameworks, add net7.0 (#213)

1.6.10.8

  • Fix to correctly handle query TTL (#187)
  • Add CheckId to the AgentServiceCheck and mark the ID as obsolete (#185)

1.6.10.7

  • Add support for replace-existing-checks parameter of service registration endpoint that allows to replace existing checks when re-registering a service (#155)
  • Update Newtonsoft.Json reference to version 13.0.1 (#160)

1.6.10.6

  • Enforce ConfigureAwait(false) on the whole library (#148)
  • Resolve synchronous access deadlock by adding ‘ConfigureAwait(false)’ (#146)

1.6.10.5

  • Check for LockTryOnce before delay (#21)
  • Add support for building and testing with .NET 6 (#135)

1.6.10.4

  • Added the TaggedAddresses field to the AgentService, CatalogService and AgentServiceRegistration structures (#111)
  • Fix the equality check (#123)
  • Added filtering abilities into Agent.Services (#128)
  • Fixed serialization of TimeSpan to GoDuration (#129)

1.6.10.3

  • Fix DLL versioning showing 0.0.0.0 (#112)

1.6.10.2

  • Add support for net5.0 (#85).
  • Use ILRepack instead of ILMerge so .NETFramework builds on all platforms (#92)
  • Many CI and build improvements (#101, #96, #89, #100, #95):
    • Unit tests are now run against several versions of the Consul server (1.6.10, 1.7.14, 1.8.14, 1.9.8, 1.10.1, as of this writing).
    • Mono on Unix is used for test runs of target net461.
  • Initial release of Consul.AspNetCore after retrieving ownership. The versioning of both Consul.AspNetCore and Consul packages are aligned for simplicity.

1.6.10.1

  • Add GRPC and GRPCUseTLS to the agent service check parameters (#22)
  • Compatibility with Consul 1.7.x - RoleLink & PolicyLink (#31)
  • Added the possibility to specify more http request options and meta-data when registering service checks (#39) It is now possible to specify the http Header(s) (Headers), Method and Body to be used for a given service check. A given service check might also now have an identifier (ID), Name and a description (Notes) associated.
  • Added the Type field to the AgentCheck and HealthCheck structures (#42)
  • Fix issue #24 removing constructor's Obsolete attribute for HttpClient injection (#32)
  • Added asp net core integration - Consul.AspNetCore (#17)(#45)
  • Fixed lock and semaphore timeouts logic (#64)
  • Added service and node filtering abilities into Health.Service (#70)
  • Fixed NRE in Lock (#66)
  • Lock: Forward user cancellation token downstream (#67)
  • Pass WriteOptions parameter to correct parameter of Put(...) (#76)(#77)
  • Update consul to v1.6.10 (#78)

1.6.1.1

  • Fix issue #9 preventing use of the library with .NET Framework

Forked from PlayFab Inc by G-Research (1.6.1)

  • Upgrade to .NET 4.6.1 and .NET Core 2.0
  • Add missing code documentation
  • General cleanup
  • Make unit tests run on .NET framework
  • Added new Token, Policy and Role API Entry points to reflect the ACL changes made in Consul 1.4.0 and 1.5.0
  • Aligned to Consul API 1.6.1

Major Changes between 0.6.4.7 and 0.7.0

  • The method of configuring the ConsulClient has been reworked. It now uses Actions to configure the options inside itself - e.g. var client = new ConsulClient((cfg) => { cfg.Datacenter = "us-west-2"; } See the file Consul.Test/ClientTest.cs and the test method Client_Constructors() for more examples. The old method will work but has been made Obsolete.
  • The ExecuteAbortableLocked method has been removed.
  • Requests to use the X-Consul-Token header instead of the ?token= query parameter. This may break use of ACLs with very old Consuls (< 0.6.0). Please file an issue if this breaks for you.

2017-01-17

  • Fixed up a few leaking tasks in Sessions, Locks and Semaphores, as well as properly waiting for the previously-leaked tasks to complete. Also made some tasks Long Running in the TPL sense.

2017-01-03 (0.7.2.0)

  • New APIs ported:
    • Snapshot API. Requires >= Consul 0.7.1 to use.
    • Keyring API. Requires >= Consul 0.7.2 to use.
    • Agent Leave/Reload APIs. Requires >= Consul 0.7.2 to use.
  • Added TLSSkipVerify and DeregisterCriticalServiceAfter to the AgentServiceCheck class. Requires >= Consul 0.7.0 to use.
  • Added Health.AggregatedStatus() extension method to any IEnumerable<HealthCheck> to roll up a set of checks. Can be used with any version of Consul.
  • Renamed CheckStatus to HealthStatus. This affects the AgentServiceCheck and AgentCheck classes.
  • Changed the Health.HealthCheck Status field to be of type HealthStatus instead of string.

2016-12-29 (0.7.0.5)

  • Added missing nuget info to project.json. Thanks @latop2604!

2016-12-20

  • Added a couple missing interfaces to IConsulClient. Thanks @chrishoffman!

2016-11-02

  • Cleaned up a few minor logic errors and made disposal of internally-used CancellationTokenSources a lot more explicit instead of leaking them.

2016-10-10

  • Revert inadvertent upgrade to .NET 4.5.1.

2016-09-21

  • Fixed a variety of bugs that could cause sessions to be destroyed if provided to a Lock or Semaphore via a LockOptions or SemaphoreOptions object.

2016-08-17

  • Ported in changes from the Consul Go API for 0.7.0. Most of these require 0.7.0 servers/agents. The changes are:
    • Atomic transactions for the KV store
    • Only retry locks/semaphores on Consul errors, not on all errors
    • Add the Near property to Prepared Queries
    • Add Query Templates to Prepared Queries, with regex filtering
    • Change all requests to use the X-Consul-Token header instead of the ?token= query parameter.
    • Add the ability to deregister a service that has been critical for an arbitrary period of time.
    • Signal WAN address translation and add the ability to look up the WAN and LAN addresses if address translation is being used.
    • Added Operator API to allow Raft editing.

2016-08-03

  • Added the ability to set LockOpts.LockRetryTime. Thanks @pfrejlich!

2016-07-10

  • Add an optional CancellationToken parameter to every method that ends up doing an HTTP request. Some of these can create an unstable Consul state (e.g. allowing the release of a distribted Semaphore to be canceled) but in many cases they should only be used if the call can possibly fail and a secondary timeout is needed.

2016-07-07

  • Add .NET Core port and build process thanks to work by @akatz0813.
  • Converted all Locks and Semaphores to be totally async thanks to work by @mjgoethe.
  • Entirely removed the method ExecuteAbortableLocked and all functionality around aborting a thread based on a Consul lock.
  • Reworked configuration of the ConsulClient to use Action<T> to configure options.

2016-06-10

  • Correct the behavior of LockTryOnce/SemaphoreTryOnce so that it now properly waits one multiple of the WaitTime before exiting in case of it already being held.

2016-05-27

  • Disable Client Certificates on Mono since the certificate handler is not implemented at the Mono library level.

2016-05-24

  • Added missing CancellationToken overrides to allow long polling for Catalog.Node() and Catalog.Service().

2016-05-16

  • Fixed configuration reuse between multiple clients so multiple ConsulClients that exist one after the other that both reference the same configuration do not spuriously dispose of part of the ConsulClientConfiguration.

2016-04-29

  • The Newtonsoft.Json DLL is now ILMerged into the Consul DLL, so there should be no more issues with mismatched JSON.NET versions in user projects. Thanks @grounded042!

2016-03-23

  • Fix a bug where setting ConsulClientConfiguration.WaitTime would cause 400 Bad Request responses. Also converted QueryOptions.WaitTime to a nullable timespan to match the ConsulClientConfiguration property of the same name/purpose.

2016-03-19

  • Fix a bug where the StatusCode was not being set correctly on some result types.

2016-03-16

  • Port in Consul 0.6.4 API since 0.6.4 is now released, which was just an update to UpdateTTL and a rename of some of the strings.
  • Moved all the helper objects (TTLStatus, CheckStatus.Passing, etc.) to reference static readonly instances to cut down on allocation and ease comparison.
  • Marked AbortableLock obselete since Thread.Abort doesn't exist in DNXCore and it's contrary to the Task philosophy to abort threads.

2016-03-15

2016-03-10

  • Added a ConsulClient(ConsulClientConfiguration, HttpClient) constructor that allows a user to pass in a custom HttpClient to set a custom proxy setting/timeout.

2016-03-04

  • Fixed double-encoding of UpdateTTL note argument.

2016-02-24

  • Removed use of PushStreamContent to fix Mono problems.

2016-02-10

  • Added the ability to use Client Certificates to authenticate a client against a Consul agent endpoint that is protected by some other service. See the ClientCertificate property of ConsulClientConfiguration. Thanks @AndyRB!
  • Fixed a possible deadlock in the Session RenewPeriodic method.

2016-02-09

  • Implemented the IDisposable Pattern for the ConsulClient class. ConsulClient objects should now have Dispose() called on them to properly clean up. Thanks @TMaster!
  • Cleaned up the Prepared Queries endpoint stack.
  • Fixed a timing bug in one of the client execute calls.
  • Added Docker checks
  • Added the ability for Semaphores and Locks to ride out brief periods of failure using the MonitorRetries and MonitorRetryTime fields in LockOptions and SemaphoreOptions classes.
  • Added the ability for Semaphores and Locks to have configurable WaitTime values, as well as to operate in TryOnce mode, which means it attempts to acquire once and throws an exception if the acquisition was not successful. To use these, set the LockWaitTime and LockTryOnce fields on the LockOptions class and the SemaphoreWaitTime and SemaphoreTryOnce fields on the SemaphoreOptions class.

2016-02-07

  • Reduce the callstack and task overhead by returning the originating Task where possible. Thanks @TMaster!

2016-01-12

  • Rewrote entire API to be async.
  • Added Prepared Queries from Consul 0.6.0.

2015-11-21

  • Reworked the entire Client class to use System.Net.HttpClient as its underpinning rather than WebRequest/WebResponse.
  • Moved all tests to Xunit.
  • Converted all uses of System.Web.HttpUtility.UrlPathEncode to System.Uri.EscapeDataString.

2015-11-09

  • Added coordinates API. WARNING: No check is done to see if the API is available. If used against a 0.5.2 agent, an exception will be thrown because the agent does not understand the coordinate URL.
  • Fixed bug in tests for session renewal.

2015-11-03

  • Fixed a bug where the node name was not deserialized when using the Catalog.Nodes() endpoint. Thanks @lockwobr!
  • Fixed a bug where a zero timespan could not be specified for Lock Delays, TTLs or Check Intervals. Thanks @eugenyshchelkanov!

2015-10-24

  • Port in changes from hashicorp/consul master:
    • Add TCP check type
    • BEHAVIOR CHANGE: Changed Session.Renew() to now throw a SessionExpiredException when the session does not exist on the Consul server
    • BEHAVIOR CHANGE: Changed all the KV write methods (Put, Delete, DeleteTree, DeleteCAS, CAS, Release, Acquire) to throw an InvalidKeyPairException if the key path or prefix begins with a / character.
  • Fixed documentation typos.

2015-08-27

2015-08-26

  • Fix a NullReferenceException when the Consul connection is down and the WebException returned has an empty response.

2015-07-25

  • BREAKING CHANGE: Renamed Client class to ConsulClient and Config to ConsulClientConfiguration to reduce confusion.
  • Completed major rework of the Client class to remove unneeded type parameters from various internal calls
  • Added interfaces to all the endpoint classes so that test mocking is possible.