Skip to content

Latest commit

 

History

History
35 lines (31 loc) · 1.2 KB

README.md

File metadata and controls

35 lines (31 loc) · 1.2 KB
Raw

Monomotronic-MA1.7-Scanner

C++ scanner for bosch monomotronic MA1.7 Fiat Tipo 1.6ie

Tested using VAGCOM KKL with Fiat 3 pin to OBD2 adapter Software in development

For ESP32: espressif/arduino-esp32#600 (comment) line 217 of esp32-hal-uart.c

if ( uart->dev->conf0.stop_bit_num == TWO_STOP_BITS_CONF) {
    uart->dev->conf0.stop_bit_num = ONE_STOP_BITS_CONF;
    uart->dev->rs485_conf.dl1_en = 1;
}

uart->dev->idle_conf.tx_idle_num = 0;
uart->dev->idle_conf.tx_brk_num = 0;
uart->dev->idle_conf.rx_idle_thrhd = 0;
uart->dev->conf1.rxfifo_full_thrhd = 1;
uart->dev->conf1.rx_tout_thrhd = 1;
UART_MUTEX_UNLOCK();

Testing: https://www.youtube.com/watch?v=awX4FsL3zvI https://www.youtube.com/watch?v=0OTWC_7FS3s

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.