Replies: 9 comments 31 replies
-
|
Hello pfeerick, could you please make a build for TX16S with Bluetooth module support? |
Beta Was this translation helpful? Give feedback.
-
|
Done. Check out the directory link in the initial message. |
Beta Was this translation helpful? Give feedback.
-
|
Thank you very much Peter! |
Beta Was this translation helpful? Give feedback.
-
|
Hello, Exactly what I needed !! I did not put much hope into finding it, but finally stumbed upon this thread. Thanks pfeerick !! |
Beta Was this translation helpful? Give feedback.
-
|
You're very welcome. And you'll be even happier soon then, as a custom build for things like bluetooth won't be needed for much longer :) |
Beta Was this translation helpful? Give feedback.
-
|
Hi pfeerick, |
Beta Was this translation helpful? Give feedback.
-
|
Yes, there are builds for all transmitters in all languages - I just added the links to them in the first post. |
Beta Was this translation helpful? Give feedback.
-
|
Hi pfeerick thank you very much for the long awaited noheli version! QX7 ACCST tbone |
Beta Was this translation helpful? Give feedback.
-
|
Done :) |
Beta Was this translation helpful? Give feedback.
-
|
Thank you very much!
Will test it next week
At 08:09 04.02.2022, you wrote:
Done :) cmake -Wno-dev -DPCB=X7 -DHELI=NO
-DFONT=SQT5 .. FLEX should be built in / on by default now...
Reply to this email directly,
<#1530 (reply in thread)>view
it on GitHub, or
<https://github.com/notifications/unsubscribe-auth/ALS7KWEXQZMUPLS442W2SJTUZN3UJANCNFSM5NFYKGAQ>unsubscribe.
Triage notifications on the go with GitHub
Mobile for
<https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675>iOS
or
<https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>Android.
You are receiving this because you
commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Hi pfeerick, |
Beta Was this translation helpful? Give feedback.
-
|
Sorry for the delay... life and other stuff has a habit of getting in the way. Done, and since I misread that at first, there is also a build for the t16. Check the link above.
|
Beta Was this translation helpful? Give feedback.
-
|
This is great! |
Beta Was this translation helpful? Give feedback.
-
|
HI pfeerick. I hope you're fine? |
Beta Was this translation helpful? Give feedback.
-
|
Done. See By request link in first post. Internal multi is standard, and flex is also standard, but is incomplete (see #1187 for details). I wasn't sure if you wanted Lua for the Lua custom scripts or not so there is a build with and one without. |
Beta Was this translation helpful? Give feedback.
-
|
Wonderfull ! and thank you for the Lua srcipt. i need it ! |
Beta Was this translation helpful? Give feedback.
-
|
Hello. Great job there. If it is possible I would like a en, Bluetooth, noheli, nogvar build for the tx16s. Thank you. |
Beta Was this translation helpful? Give feedback.
-
|
Sorry for the delay... done. There are builds with and without the lua custom mixer script capability at the link in the first post. |
Beta Was this translation helpful? Give feedback.
-
|
Thank you very much |
Beta Was this translation helpful? Give feedback.
-
|
If i reflash the tx16 wirh the custom fw, will i loose models and widgets? |
Beta Was this translation helpful? Give feedback.
-
|
No, you should only lose widgets when converting from OTX -> ETX.... after that you should be fine... Upgrading from 2.5 -> 2.6 had some minor hiccups, but usually it was just a matter of tricking the radio in to trying to convert again, or using Companion to import models. Other than that, there should not be any lose of models or settings... but it pays to keep a backup anyway. |
Beta Was this translation helpful? Give feedback.
-
|
I confirm that I did not loose models, widgets or settings. Thank you once again |
Beta Was this translation helpful? Give feedback.
-
|
Hello Peter, could you please make a build for t18 with Bluetooth module, serial ports, noheli, and lua support? Thank you!) |
Beta Was this translation helpful? Give feedback.
-
|
I don't know whether bluetooth trainer is hardware independent. |
Beta Was this translation helpful? Give feedback.
-
|
It's not hardware dependent, it's the instruction set used by the frsky bluetooth trainer module vs that used on the HC-05... So it might be possible to use the HC-05 in the future. I'm not sure if it would be possible to mix and match (i.e. HC-05 on your TX16s and X9D+2019 with frsky bl module), but same module on both sides should be doable. |
Beta Was this translation helpful? Give feedback.
-
|
The Frysky modules are Bluetooth low energy where as the HC05/06 are BT Classic, which cannot talk to each other. The HM11 is a Bluetooth LE device that might work.. but they use a different service and characteristic to talk. So long story short no none of them are compatible. Using two HM10/11 or a HC05/06 would be possible had frsky opted for the same AT command set, but they didn't. Some pretty easy code changes to bluetooth.cpp would make this possible. I started working on a alternative open source one based on the ESP32 as they are cheap and once it's working can use ESPnow for some actual long range trainer/telemetery and BLE or BT classic. If anyone wants to help I would appreciate it! Need to finish the labels selector, then can focus on this again ;) https://github.com/dlktdr/BTWifiModule |
Beta Was this translation helpful? Give feedback.
-
|
I found something. https://www.rcgroups.com/forums/showthread.php?3718549 |
Beta Was this translation helpful? Give feedback.
-
|
@c608345, at the specified link, an example of connecting hc-05 to a tx16s transmitter (not t18) for telemetry out. Probably this method is no longer relevant, because there is an easier way: in the latest versions of the opentx firmware for tx16s (in edgetx maybe too, i don't know), you can choose different modes for two available Serial ports TTL, such as telemetry out/in or sbus trainer and so is LUA. In particular, no settings are even required for telemetry in this case, except to pre-configure baudrate on the hc-05 module. Because hc-05/06 is a "transparent" module, it broadcasts everything that comes to it from the uart. It is important that the hc module is connected not as a bluetooth interface, but as a kind of uart device (it does not interact with the transmitter in any way. work without AT commands, initialization and MAC-address). SO all we need now is the same support for the serial ports in T18 firmware (like in tx16s) because we definitely have a free UART in this transmitter. https://www.youtube.com/watch?v=VuPD2GFMVKI&t=148s https://www.youtube.com/watch?v=0UulXKpc6Kg |
Beta Was this translation helpful? Give feedback.
-
|
Hi pfeerick, thanks in advance |
Beta Was this translation helpful? Give feedback.
-
|
See https://github.com/EdgeTX/edgetx/wiki/Building-radio-firmware-in-a-webbrowser-with-Gitpod how to easily make your own build in a web-browser, without having to setup/install any software on your PC. PR #1713 is closed w/o merging, see PR #1748 instead (merged to main). |
Beta Was this translation helpful? Give feedback.
-
|
thats great! |
Beta Was this translation helpful? Give feedback.
-
Ask here if you want/need specific options that are not included in the stock builds. Builds will be uploaded to here (same link as 'By request' below), so check it out before making a request just in case there is already a custom build with your chosen options...
Beta Was this translation helpful? Give feedback.
All reactions