Craftbot: print3d hangs after M104 because the response is interpreted as a M105 response #36

companje · 2016-02-15T10:32:18Z

The Craftbot firmware has some small differences causing print3d to hang. For example "M104 S200" returns ok wíth temperature which is different from Marlin. Here's (http://reprap.org/wiki/G-code#M104:_Set_Extruder_Temperature) a description of M104 on the RepRap site.

olijf · 2016-02-15T16:21:13Z

After sending M104 S180 at the end of the printing process it seems to stop te printer somehow. This only happens at the end of a print.
Disabling the line in your printer config (in the custom GCODE settings in the webUI) seems to be an easy fix and workaround.

Relevant part of the log

15-02 14:50:18  [ABD] printNextLine(): 2903/2906
15-02 14:50:18  [MLD] sendCode(): M104 S180
15-02 14:50:18  [MLD] extractGCodeInfo()
15-02 14:50:18  [MLD]   (extractGCodeInfo) targetTemperature_: 180
15-02 14:50:18  [MLD] readCode(): 'ok T:230'
15-02 14:50:18  [MLD] parseTemperatures(): 'ok T:230'
15-02 14:50:18  [MLD]   checkTemperatureInterval_: '5000'
15-02 14:50:20  [MLD] update temp()
15-02 14:50:20  [MLD]   check temp
15-02 14:50:20  [MLD] sendCode(): M105
15-02 14:50:20  [MLD] extractGCodeInfo()
15-02 14:50:20  [MLD] readCode(): 'ok T:230 B:70'

Print3D seems to think the response ok T:230 is a reaction to a M105 command resulting in not returning the control to the user, forcing him to restart his doodl3d box.

Please advice users about this current workaround.

peteruithoven · 2016-02-15T18:02:39Z

But why doesn't this happen with the start gcode? This should also contain a temperature change command.

companje · 2016-02-15T18:56:30Z

My theory is that when it just misses 1 normal 'ok' (because of the
temperature behind it) it has still enough gcode commands in the queue.
Only at the end of a print it gets stuck because it keeps waiting because
it is expecting one more 'ok' but it never arrives.

On Mon, Feb 15, 2016 at 7:02 PM, Peter Uithoven [email protected]
wrote:

But why doesn't this happen with the start gcode? This should also contain
a temperature change command.

—
Reply to this email directly or view it on GitHub
#36 (comment).

peteruithoven · 2016-02-15T19:44:18Z

But, there is no such queue? It only advances to the next line when it receives an ok. If we miss one ok it should just stop sending lines. I don't understand what triggers print3d to send the next line.

companje · 2016-02-15T20:03:51Z

I think you're right Peter. It was the prototype where send 5 lines at the
start without waiting for ok to and then each next line after receiving an
ok. But in the MarlinDriver (
https://github.com/Doodle3D/print3d/blob/master/src/drivers/MarlinDriver.cpp) I
don't see this.

On Mon, Feb 15, 2016 at 8:44 PM, Peter Uithoven [email protected]
wrote:

But, there is no such queue? It only advances to the next line when it
receives an ok. If we miss one ok it should just stop sending lines. I
don't understand what triggers print3d to send the next line.

—
Reply to this email directly or view it on GitHub
#36 (comment).

olijf · 2016-02-15T20:20:30Z

In https://github.com/Doodle3D/doodle3d-firmware/blob/master/src/conf_defaults.lua#L225 there does not seem to be a M104 in the start code.

olijf · 2016-02-16T10:52:46Z

Attached is the log of sevaral sucessful prints. @peteruithoven wanted to checkout the Q:128 code as response to M190
craftbot.txt

olijf · 2016-02-16T11:18:20Z

As requested the relevant part of the log.

15-02 16:01:01  [MLD] readCode(): 'ok Q:128'
15-02 16:01:01  [ABD] printNextLine(): 2/331
15-02 16:01:01  [MLD] sendCode(): G21 
15-02 16:01:01  [MLD] extractGCodeInfo()
15-02 16:01:01  [MLD] readCode(): 'ok Q:128'
15-02 16:01:01  [ABD] printNextLine(): 3/331
15-02 16:01:01  [MLD] sendCode(): G91 
15-02 16:01:01  [MLD] extractGCodeInfo()
15-02 16:01:01  [MLD] readCode(): 'ok Q:128'
15-02 16:01:01  [ABD] printNextLine(): 4/331
15-02 16:01:01  [MLD] sendCode(): M107 
15-02 16:01:01  [MLD] extractGCodeInfo()
15-02 16:01:01  [MLD] readCode(): 'ok Q:128'
15-02 16:01:01  [ABD] printNextLine(): 5/331
15-02 16:01:01  [MLD] sendCode(): G28 X0 Y0 
15-02 16:01:01  [MLD] extractGCodeInfo()
15-02 16:01:02  [MLD] readCode(): 'ok Q:128'
15-02 16:01:02  [ABD] printNextLine(): 6/331
15-02 16:01:02  [MLD] sendCode(): G28 Z0 
15-02 16:01:02  [MLD] extractGCodeInfo()
15-02 16:01:03  [SRV] read 0 bytes from client with fd 5
15-02 16:01:03  [SRV] read 4 bytes from client with fd 5
15-02 16:01:03  [IPC] command: [>>getState]
15-02 16:01:03  [CDH] received get state command
15-02 16:01:03  [IPC] command: [<<ok]
15-02 16:01:03  [SRV] read 0 bytes from client with fd 5
15-02 16:01:03  [SRV] read 10 bytes from client with fd 5
15-02 16:01:03  [IPC] command: [>>getTemperature:s1]
15-02 16:01:03  [CDH] received get temperature command with arg 1
15-02 16:01:03  [IPC] command: [<<ok]
15-02 16:01:03  [SRV] read 10 bytes from client with fd 5
15-02 16:01:03  [IPC] command: [>>getTemperature:s2]
15-02 16:01:03  [CDH] received get temperature command with arg 2
15-02 16:01:03  [IPC] command: [<<ok]
15-02 16:01:03  [SRV] read 10 bytes from client with fd 5
15-02 16:01:03  [IPC] command: [>>getTemperature:s3]
15-02 16:01:03  [CDH] received get temperature command with arg 3
15-02 16:01:03  [IPC] command: [<<ok]
15-02 16:01:03  [SRV] read 10 bytes from client with fd 5
15-02 16:01:03  [IPC] command: [>>getTemperature:s4]
15-02 16:01:03  [CDH] received get temperature command with arg 4
15-02 16:01:03  [IPC] command: [<<ok]
15-02 16:01:03  [SRV] read 10 bytes from client with fd 5
15-02 16:01:03  [IPC] command: [>>getTemperature:s5]
15-02 16:01:03  [CDH] received get temperature command with arg 5
15-02 16:01:03  [IPC] command: [<<ok]
15-02 16:01:03  [SRV] read 0 bytes from client with fd 5
15-02 16:01:03  [SRV] read 4 bytes from client with fd 5
15-02 16:01:03  [IPC] command: [>>getProgress]
15-02 16:01:03  [CDH] received get progress command
15-02 16:01:03  [IPC] command: [<<ok]
15-02 16:01:03  [MLD] update temp()
15-02 16:01:03  [MLD]   check temp
15-02 16:01:03  [MLD] sendCode(): M105
15-02 16:01:03  [MLD] extractGCodeInfo()
15-02 16:01:03  [MLD] readCode(): 'ok T:228 B:63'
15-02 16:01:03  [MLD] parseTemperatures(): 'ok T:228 B:63'
15-02 16:01:03  [MLD]   checkTemperatureInterval_: '5000'
15-02 16:01:04  [MLD] readCode(): 'ok Q:128'
15-02 16:01:04  [ABD] printNextLine(): 7/331
15-02 16:01:04  [MLD] sendCode(): G1 Z15 F9000 
15-02 16:01:04  [MLD] extractGCodeInfo()
15-02 16:01:06  [MLD] readCode(): 'ok Q:128'
15-02 16:01:06  [ABD] printNextLine(): 8/331
15-02 16:01:06  [MLD] sendCode(): G92 E0 
15-02 16:01:06  [MLD] extractGCodeInfo()
15-02 16:01:06  [MLD] readCode(): 'ok Q:128'
15-02 16:01:06  [ABD] printNextLine(): 9/331
15-02 16:01:06  [MLD] sendCode(): G1 F200 E10 
15-02 16:01:06  [MLD] extractGCodeInfo()
15-02 16:01:06  [SRV] read 0 bytes from client with fd 5
15-02 16:01:06  [SRV] read 4 bytes from client with fd 5
15-02 16:01:06  [IPC] command: [>>getState]
15-02 16:01:06  [CDH] received get state command
15-02 16:01:06  [IPC] command: [<<ok]
15-02 16:01:06  [SRV] read 0 bytes from client with fd 5
15-02 16:01:06  [SRV] read 10 bytes from client with fd 5
15-02 16:01:06  [IPC] command: [>>getTemperature:s1]
15-02 16:01:06  [CDH] received get temperature command with arg 1
15-02 16:01:06  [IPC] command: [<<ok]
15-02 16:01:06  [SRV] read 10 bytes from client with fd 5
15-02 16:01:06  [IPC] command: [>>getTemperature:s2]
15-02 16:01:06  [CDH] received get temperature command with arg 2
15-02 16:01:06  [IPC] command: [<<ok]
15-02 16:01:06  [SRV] read 10 bytes from client with fd 5
15-02 16:01:06  [IPC] command: [>>getTemperature:s3]
15-02 16:01:06  [CDH] received get temperature command with arg 3
15-02 16:01:06  [IPC] command: [<<ok]
15-02 16:01:06  [SRV] read 10 bytes from client with fd 5
15-02 16:01:06  [IPC] command: [>>getTemperature:s4]
15-02 16:01:06  [CDH] received get temperature command with arg 4
15-02 16:01:06  [IPC] command: [<<ok]
15-02 16:01:06  [SRV] read 10 bytes from client with fd 5
15-02 16:01:06  [IPC] command: [>>getTemperature:s5]
15-02 16:01:06  [CDH] received get temperature command with arg 5
15-02 16:01:06  [IPC] command: [<<ok]
15-02 16:01:06  [SRV] read 0 bytes from client with fd 5
15-02 16:01:06  [SRV] read 4 bytes from client with fd 5
15-02 16:01:06  [IPC] command: [>>getProgress]
15-02 16:01:06  [CDH] received get progress command
15-02 16:01:06  [IPC] command: [<<ok]
15-02 16:01:07  [MLD] readCode(): 'ok Q:128'
15-02 16:01:07  [ABD] printNextLine(): 10/331
15-02 16:01:07  [MLD] sendCode(): G92 E0 
15-02 16:01:07  [MLD] extractGCodeInfo()
15-02 16:01:07  [MLD] readCode(): 'ok Q:128'
15-02 16:01:07  [ABD] printNextLine(): 11/331
15-02 16:01:07  [MLD] sendCode(): G92 E0 
15-02 16:01:07  [MLD] extractGCodeInfo()
15-02 16:01:07  [MLD] readCode(): 'ok Q:128'
15-02 16:01:07  [ABD] printNextLine(): 12/331
15-02 16:01:07  [MLD] sendCode(): G1 F9000
15-02 16:01:07  [MLD] extractGCodeInfo()
15-02 16:01:07  [MLD] readCode(): 'ok Q:128'
15-02 16:01:07  [ABD] printNextLine(): 13/331
15-02 16:01:07  [MLD] sendCode(): G90 
15-02 16:01:07  [MLD] extractGCodeInfo()
15-02 16:01:07  [MLD] readCode(): 'ok Q:128'
15-02 16:01:07  [ABD] printNextLine(): 14/331
15-02 16:01:07  [MLD] sendCode(): M117 Printing Doodle...   
15-02 16:01:07  [MLD] extractGCodeInfo()
15-02 16:01:07  [MLD] readCode(): 'ok Q:128'
15-02 16:01:07  [ABD] printNextLine(): 15/331
15-02 16:01:07  [MLD] sendCode(): G0 X99.850 Y99.100 Z0.200 F12000.000
15-02 16:01:07  [MLD] extractGCodeInfo()
15-02 16:01:08  [MLD] update temp()
15-02 16:01:08  [MLD]   check temp
15-02 16:01:08  [MLD] sendCode(): M105
15-02 16:01:08  [MLD] extractGCodeInfo()
15-02 16:01:08  [MLD] readCode(): 'ok T:230 B:63'
15-02 16:01:08  [MLD] parseTemperatures(): 'ok T:230 B:63'
15-02 16:01:08  [MLD]   checkTemperatureInterval_: '5000'
15-02 16:01:09  [MLD] readCode(): 'ok Q:128'
15-02 16:01:09  [ABD] printNextLine(): 16/331
15-02 16:01:09  [MLD] sendCode(): G1 X99.850 Y99.400 Z0.200 F2100.000 E0.025
15-02 16:01:09  [MLD] extractGCodeInfo()
15-02 16:01:09  [MLD] readCode(): 'ok Q:128'

Ending code:


15-02 15:53:02  [MLD] readCode(): 'ok Q:128'
15-02 15:53:02  [ABD] printNextLine(): 1990/2003
15-02 15:53:02  [MLD] sendCode(): G1 X105.346 Y65.460 Z4.400 F3000.000 E288.405
15-02 15:53:02  [MLD] extractGCodeInfo()
15-02 15:53:02  [MLD] readCode(): 'ok Q:128'
15-02 15:53:02  [ABD] printNextLine(): 1991/2003
15-02 15:53:02  [MLD] sendCode(): G1 X105.840 Y63.832 Z4.400 F3000.000 E288.475
15-02 15:53:02  [MLD] extractGCodeInfo()
15-02 15:53:02  [SRV] read 0 bytes from client with fd 5
15-02 15:53:02  [SRV] read 4 bytes from client with fd 5
15-02 15:53:02  [IPC] command: [>>getState]
15-02 15:53:02  [CDH] received get state command
15-02 15:53:02  [IPC] command: [<<ok]
15-02 15:53:02  [SRV] read 10 bytes from client with fd 6
15-02 15:53:02  [IPC] command: [>>getTemperature:s1]
15-02 15:53:02  [CDH] received get temperature command with arg 1
15-02 15:53:02  [IPC] command: [<<ok]
15-02 15:53:02  [SRV] read 10 bytes from client with fd 6
15-02 15:53:02  [IPC] command: [>>getTemperature:s2]
15-02 15:53:02  [CDH] received get temperature command with arg 2
15-02 15:53:02  [IPC] command: [<<ok]
15-02 15:53:02  [SRV] read 10 bytes from client with fd 6
15-02 15:53:02  [IPC] command: [>>getTemperature:s3]
15-02 15:53:02  [CDH] received get temperature command with arg 3
15-02 15:53:02  [IPC] command: [<<ok]
15-02 15:53:02  [SRV] read 10 bytes from client with fd 6
15-02 15:53:02  [IPC] command: [>>getTemperature:s4]
15-02 15:53:02  [CDH] received get temperature command with arg 4
15-02 15:53:02  [IPC] command: [<<ok]
15-02 15:53:02  [SRV] read 10 bytes from client with fd 6
15-02 15:53:02  [IPC] command: [>>getTemperature:s5]
15-02 15:53:02  [CDH] received get temperature command with arg 5
15-02 15:53:02  [IPC] command: [<<ok]
15-02 15:53:02  [SRV] read 4 bytes from client with fd 5
15-02 15:53:02  [IPC] command: [>>getProgress]
15-02 15:53:02  [CDH] received get progress command
15-02 15:53:02  [IPC] command: [<<ok]
15-02 15:53:02  [MLD] readCode(): 'ok Q:128'
15-02 15:53:02  [ABD] printNextLine(): 1992/2003
15-02 15:53:02  [MLD] sendCode(): G1 X106.055 Y61.779 Z4.400 F3000.000 E288.561
15-02 15:53:02  [MLD] extractGCodeInfo()
15-02 15:53:02  [SRV] read 4 bytes from client with fd 6
15-02 15:53:02  [IPC] command: [>>getState]
15-02 15:53:02  [CDH] received get state command
15-02 15:53:02  [IPC] command: [<<ok]
15-02 15:53:02  [MLD] readCode(): 'ok Q:128'
15-02 15:53:02  [ABD] printNextLine(): 1993/2003
15-02 15:53:02  [MLD] sendCode(): G1 X106.055 Y60.189 Z4.400 F3000.000 E288.627
15-02 15:53:02  [MLD] extractGCodeInfo()
15-02 15:53:02  [MLD] readCode(): 'ok Q:128'
15-02 15:53:02  [ABD] printNextLine(): 1994/2003
15-02 15:53:02  [MLD] sendCode(): M107 
15-02 15:53:02  [MLD] extractGCodeInfo()
15-02 15:53:02  [MLD] readCode(): 'ok Q:128'
15-02 15:53:02  [ABD] printNextLine(): 1995/2003
15-02 15:53:02  [MLD] sendCode(): G91 
15-02 15:53:02  [MLD] extractGCodeInfo()
15-02 15:53:02  [MLD] readCode(): 'ok Q:128'
15-02 15:53:02  [ABD] printNextLine(): 1996/2003
15-02 15:53:02  [MLD] sendCode(): G1 E-1 F300 
15-02 15:53:02  [MLD] extractGCodeInfo()
15-02 15:53:02  [MLD] readCode(): 'ok Q:128'
15-02 15:53:02  [ABD] printNextLine(): 1997/2003
15-02 15:53:02  [MLD] sendCode(): G1 Z+0.5 E-5 X-20 Y-20 F9000 
15-02 15:53:02  [MLD] extractGCodeInfo()
15-02 15:53:03  [MLD] readCode(): 'ok Q:128'
15-02 15:53:03  [ABD] printNextLine(): 1998/2003
15-02 15:53:03  [MLD] sendCode(): G28 X0 Y0 
15-02 15:53:03  [MLD] extractGCodeInfo()
15-02 15:53:03  [SRV] read 0 bytes from client with fd 5
15-02 15:53:03  [SRV] read 4 bytes from client with fd 5
15-02 15:53:03  [IPC] command: [>>getState]
15-02 15:53:03  [CDH] received get state command
15-02 15:53:03  [IPC] command: [<<ok]
15-02 15:53:03  [SRV] read 0 bytes from client with fd 5
15-02 15:53:03  [SRV] read 10 bytes from client with fd 5
15-02 15:53:03  [IPC] command: [>>getTemperature:s1]
15-02 15:53:03  [CDH] received get temperature command with arg 1
15-02 15:53:03  [IPC] command: [<<ok]
15-02 15:53:03  [SRV] read 10 bytes from client with fd 5
15-02 15:53:03  [IPC] command: [>>getTemperature:s2]
15-02 15:53:03  [CDH] received get temperature command with arg 2
15-02 15:53:03  [IPC] command: [<<ok]
15-02 15:53:03  [SRV] read 10 bytes from client with fd 5
15-02 15:53:03  [IPC] command: [>>getTemperature:s3]
15-02 15:53:03  [CDH] received get temperature command with arg 3
15-02 15:53:03  [IPC] command: [<<ok]
15-02 15:53:03  [SRV] read 10 bytes from client with fd 5
15-02 15:53:03  [IPC] command: [>>getTemperature:s4]
15-02 15:53:03  [CDH] received get temperature command with arg 4
15-02 15:53:03  [IPC] command: [<<ok]
15-02 15:53:03  [SRV] read 10 bytes from client with fd 5
15-02 15:53:03  [IPC] command: [>>getTemperature:s5]
15-02 15:53:03  [CDH] received get temperature command with arg 5
15-02 15:53:03  [IPC] command: [<<ok]
15-02 15:53:03  [SRV] read 0 bytes from client with fd 5
15-02 15:53:03  [SRV] read 4 bytes from client with fd 5
15-02 15:53:03  [IPC] command: [>>getProgress]
15-02 15:53:03  [CDH] received get progress command
15-02 15:53:03  [IPC] command: [<<ok]
15-02 15:53:05  [MLD] update temp()
15-02 15:53:05  [MLD]   check temp
15-02 15:53:05  [MLD] sendCode(): M105
15-02 15:53:05  [MLD] extractGCodeInfo()
15-02 15:53:05  [MLD] readCode(): 'ok T:230 B:70'
15-02 15:53:05  [MLD] parseTemperatures(): 'ok T:230 B:70'
15-02 15:53:05  [MLD]   checkTemperatureInterval_: '5000'
15-02 15:53:05  [SRV] read 0 bytes from client with fd 5
15-02 15:53:05  [SRV] read 4 bytes from client with fd 5
15-02 15:53:05  [IPC] command: [>>getState]
15-02 15:53:05  [CDH] received get state command
15-02 15:53:05  [IPC] command: [<<ok]
15-02 15:53:05  [SRV] read 0 bytes from client with fd 5
15-02 15:53:05  [SRV] read 10 bytes from client with fd 5
15-02 15:53:05  [IPC] command: [>>getTemperature:s1]
15-02 15:53:05  [CDH] received get temperature command with arg 1
15-02 15:53:05  [IPC] command: [<<ok]
15-02 15:53:05  [SRV] read 10 bytes from client with fd 5
15-02 15:53:05  [IPC] command: [>>getTemperature:s2]
15-02 15:53:05  [CDH] received get temperature command with arg 2
15-02 15:53:05  [IPC] command: [<<ok]
15-02 15:53:05  [SRV] read 10 bytes from client with fd 5
15-02 15:53:05  [IPC] command: [>>getTemperature:s3]
15-02 15:53:05  [CDH] received get temperature command with arg 3
15-02 15:53:05  [IPC] command: [<<ok]
15-02 15:53:05  [SRV] read 10 bytes from client with fd 5
15-02 15:53:05  [IPC] command: [>>getTemperature:s4]
15-02 15:53:05  [CDH] received get temperature command with arg 4
15-02 15:53:05  [IPC] command: [<<ok]
15-02 15:53:05  [SRV] read 10 bytes from client with fd 5
15-02 15:53:05  [IPC] command: [>>getTemperature:s5]
15-02 15:53:05  [CDH] received get temperature command with arg 5
15-02 15:53:05  [IPC] command: [<<ok]
15-02 15:53:05  [SRV] read 0 bytes from client with fd 5
15-02 15:53:05  [SRV] read 4 bytes from client with fd 5
15-02 15:53:05  [IPC] command: [>>getProgress]
15-02 15:53:05  [CDH] received get progress command
15-02 15:53:05  [IPC] command: [<<ok]
15-02 15:53:05  [SRV] read 0 bytes from client with fd 5
15-02 15:53:05  [SRV] read 4 bytes from client with fd 5
15-02 15:53:05  [IPC] command: [>>getState]
15-02 15:53:05  [CDH] received get state command
15-02 15:53:05  [IPC] command: [<<ok]
15-02 15:53:06  [MLD] readCode(): 'ok Q:128'
15-02 15:53:06  [ABD] printNextLine(): 1999/2003
15-02 15:53:06  [MLD] sendCode(): M84 
15-02 15:53:06  [MLD] extractGCodeInfo()
15-02 15:53:06  [MLD] readCode(): 'ok Q:128'
15-02 15:53:06  [ABD] printNextLine(): 2000/2003
15-02 15:53:06  [MLD] sendCode(): G90 
15-02 15:53:06  [MLD] extractGCodeInfo()
15-02 15:53:06  [MLD] readCode(): 'ok Q:128'
15-02 15:53:06  [ABD] printNextLine(): 2001/2003
15-02 15:53:06  [MLD] sendCode(): M140 S70
15-02 15:53:06  [MLD] extractGCodeInfo()
15-02 15:53:06  [MLD]   (extractGCodeInfo) targetBedTemperature_: 70
15-02 15:53:06  [MLD] readCode(): 'ok B:70'
15-02 15:53:06  [ABD] printNextLine(): 2002/2003
15-02 15:53:06  [MLD] sendCode(): M117 Done                 
15-02 15:53:06  [MLD] extractGCodeInfo()
15-02 15:53:06  [MLD] readCode(): 'ok Q:128'
15-02 15:53:06  [ABD] printNextLine(): 2003/2003
15-02 15:53:06  [ABD] resetPrint()
15-02 15:53:06  [ABD] setState(): 5:printing > 3:idle

peteruithoven · 2016-02-17T15:53:01Z

Craftbot

(Using Pronterface)

Marlin default start gcode

Set nozzle target temperature
M109 S{printingTemp}
Response: ok Q:128
Set target bed temperature
M190 S{printingBedTemp}
Response: ok Q:128

marlin default end gcode

Set nozzle target temperature
M104 S{preheatTemp}
No response...
Set target bed temperature
M140 S60
Response: ok B:50
(Looks like it responds with current bed temperature)

Marlin preheat / heatup command:

Same g-code as start gcode.

Regulier commando, zoals G21:
Response: ok Q:128

Ultimaker2

(Using p3d on WiFi-Box because of baudrate)
G21
Response: ok
M109 S180
Response: ok
M104 S180
Response: ok

So sending M104 S... (Set extruder temperature (not waiting)) doesn't give a response, even though sending a M140 S... does. We need to figure out how to cooldown this printer.

peteruithoven · 2016-02-17T16:39:02Z

Quick options:

Putting that M104 command at the end. But then it sticks in printing state which means you can only press stop. After pressing stop it sticks in stopping mode. So not really an option.
Using waiting command (M109) instead, users will have to wait for it to cooldown to preheat temp before it can start heating up for a next print.

I'll check if the Craftbot software uses a special cooldown gcode command.

peteruithoven · 2016-02-17T17:03:32Z

The g-code from CraftWare ends with:

G21 ; mm
G90 ; abs
G92 E0 ; reset extr
M106 S255
G0 F4800 X38.071 Y106.733

G0X0Y0

M104 S0 ;turn off head heater
M140 S0 ;turn off bed heater
M106 S0

So this uses a regular M104 S...(The M106 is the fanspeed)
It's also followed by ;CraftWare_Settings=... but that isn't relevant.

peteruithoven · 2016-02-17T17:04:56Z

Sending M104 S0 also gives no response.

companje · 2016-02-17T17:15:43Z

A workaround for now would be to use an M109 S180 in Doodle3D's end-code for the CraftBot.
I will contact CraftUnique so they can fix the issue of the lacking OK response after M104.

companje · 2016-02-19T16:11:16Z

I got a response from CraftUnique. Their experiment shows that M104 S180 returns 'ok T:21' which is not according to the RepRap specs but still it does return something. I confirmed this by connecting the CraftBot to my Mac and opening the Arduino IDE's Serial Monitor. It gives this response indeed when using the correct line-endings (LF).

companje · 2016-02-19T17:19:42Z

Interesting: Sending an M104 S180 from Printrun does not give a response.
Sending the same from Arduino (or from Processing) returns ok T:21. The response I receive in Processing is correctly followed by a line-feed.

peteruithoven · 2016-02-19T18:16:58Z

Can you see in Processing whether the response line-feed is the same after a M104 and a M115 for example?

companje · 2016-02-20T09:50:37Z

The response ends in both cases with a line-feed (ASCII character 0x0A)

olijf · 2016-02-23T15:06:15Z

As the response to an M104 (only the extruder temperature: ok T:230) is different than that of an M105 (extruder temp and bed temperature: ok T:69 B:23) it might be possible to create a fix for the craftbot.

15-02 14:50:18  [MLD] sendCode(): M104 S180
15-02 14:50:18  [MLD] readCode(): 'ok T:230'
[...]
23-02 15:56:14  [MLD] sendCode(): M105
23-02 15:56:14  [MLD] readCode(): 'ok T:69 B:23'

peteruithoven · 2016-02-23T15:12:23Z

We've also confirmed that we do receive a response from the Craftbot when sending a M104.

peteruithoven · 2016-02-23T15:36:36Z

Currently, in the marlin driver, we have 2 communication "lines" to a printer. One in which we occasionally check the temperature and one in which we send the buffered gcode commands. See our drivers docs for more info.
To support responses from commands other than temperature checks that look like temperature checks, wouldn't it be possible to use one communication line? Currently we send temperature check gcode directly, we'd have to add those to the beginning of the gcode buffer.
Currently we only send the next line when it's not a temperature response, and the response begins with ok, we'd have to change that into sending the next line when it begins with ok (which also includes the temperature responses) and parse the temperature when that's also included in that response.

Where we parse responses:
https://github.com/Doodle3D/print3d/blob/master/src/drivers/MarlinDriver.cpp#L128-L175
Sending temperature requests:
https://github.com/Doodle3D/print3d/blob/master/src/drivers/MarlinDriver.cpp#L228-L230
Appending gcode (to the back of the buffer):
https://github.com/Doodle3D/print3d/blob/master/src/drivers/MarlinDriver.cpp#L123-L126
https://github.com/Doodle3D/print3d/blob/master/src/drivers/AbstractDriver.cpp#L85-L89

It's probably useful to build on the upcoming gcode buffer improvements, since includes a lot of gcode buffer changes and improvements.
There are happening in the following branch: https://github.com/Doodle3D/print3d/tree/feature/logging%2Bchecking-renewed

peteruithoven · 2017-01-13T13:55:28Z

We did do a commit where we added custom endcode for the craftbot, where we replaced the M104 with a M109. But as mentioned above this is a waiting / blocking command, so the user can only do something else after is has reached the preheat temperature.
Doodle3D/doodle3d-firmware@1cb1309

olijf added 0 - Backlog 2.printer-compatibility and removed 0 - Backlog labels Mar 9, 2016

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Craftbot: print3d hangs after M104 because the response is interpreted as a M105 response #36

Craftbot: print3d hangs after M104 because the response is interpreted as a M105 response #36

companje commented Feb 15, 2016

olijf commented Feb 15, 2016

peteruithoven commented Feb 15, 2016

companje commented Feb 15, 2016

peteruithoven commented Feb 15, 2016

companje commented Feb 15, 2016

olijf commented Feb 15, 2016

olijf commented Feb 16, 2016

olijf commented Feb 16, 2016

peteruithoven commented Feb 17, 2016

peteruithoven commented Feb 17, 2016

peteruithoven commented Feb 17, 2016

peteruithoven commented Feb 17, 2016

companje commented Feb 17, 2016

companje commented Feb 19, 2016

companje commented Feb 19, 2016

peteruithoven commented Feb 19, 2016

companje commented Feb 20, 2016

olijf commented Feb 23, 2016

peteruithoven commented Feb 23, 2016

peteruithoven commented Feb 23, 2016

peteruithoven commented Jan 13, 2017

Craftbot: print3d hangs after M104 because the response is interpreted as a M105 response #36

Craftbot: print3d hangs after M104 because the response is interpreted as a M105 response #36

Comments

companje commented Feb 15, 2016

olijf commented Feb 15, 2016

peteruithoven commented Feb 15, 2016

companje commented Feb 15, 2016

peteruithoven commented Feb 15, 2016

companje commented Feb 15, 2016

olijf commented Feb 15, 2016

olijf commented Feb 16, 2016

olijf commented Feb 16, 2016

peteruithoven commented Feb 17, 2016

Craftbot

Marlin default start gcode

marlin default end gcode

Marlin preheat / heatup command:

Ultimaker2

peteruithoven commented Feb 17, 2016

peteruithoven commented Feb 17, 2016

peteruithoven commented Feb 17, 2016

companje commented Feb 17, 2016

companje commented Feb 19, 2016

companje commented Feb 19, 2016

peteruithoven commented Feb 19, 2016

companje commented Feb 20, 2016

olijf commented Feb 23, 2016

peteruithoven commented Feb 23, 2016

peteruithoven commented Feb 23, 2016

peteruithoven commented Jan 13, 2017