Need data from other models of Daikin systems and controllers

[DirtyDevWork]

Post the returned values from GET /common/basic_info, /aircon/get_model_info, /aircon/get_control_info, /aircon/get_sensor_info, and feature list of your Daikin system here to help inclusion in this plugin in the future

Edit: for any future posts, the GET /common/basic_info response has two entries (pw= and mac=) that just for security, should be replaced with XXXXXX before posting. If you're unsure, check the other posts here

[icepicknz]

ret=OK,type=aircon,reg=th,dst=1,ver=2_9_0,pow=0,err=0,location=0,name=%44%61%69%6b%69%6e%41%50%37%32%35%30%39,icon=0,method=polling,port=30050,id=000102ss,pw=XXXXXX,lpw_flag=0,adp_kind=2,pv=2,cpv=2,cpv_minor=00,led=1,en_setzone=1,mac=XXXXXXXXXXXX,adp_mode=run,en_hol=0,grp_name=,en_grp=0

ret=OK,model=0C88,type=N,pv=2,cpv=2,cpv_minor=00,mid=NA,humd=0,s_humd=0,acled=0,land=0,elec=0,temp=1,temp_rng=0,m_dtct=1,ac_dst=--,disp_dry=0,dmnd=0,en_scdltmr=1,en_frate=1,en_fdir=1,s_fdir=3,en_rtemp_a=0,en_spmode=0,en_ipw_sep=0,en_mompow=0

ret=OK,pow=0,mode=4,adv=,stemp=24.0,shum=0,dt1=25.0,dt2=M,dt3=18.0,dt4=24.0,dt5=24.0,dt7=25.0,dh1=AUTO,dh2=50,dh3=0,dh4=0,dh5=0,dh7=AUTO,dhh=50,b_mode=4,b_stemp=24.0,b_shum=0,alert=255,f_rate=4,f_dir=0,b_f_rate=4,b_f_dir=0,dfr1=5,dfr2=5,dfr3=4,dfr4=4,dfr5=4,dfr6=5,dfr7=5,dfrh=5,dfd1=0,dfd2=0,dfd3=0,dfd4=0,dfd5=0,dfd6=0,dfd7=0,dfdh=0

ret=OK,htemp=21.0,hhum=-,otemp=16.0,err=0,cmpfreq=0

[travellingnashes]

ret=OK,type=aircon,reg=eu,dst=1,ver=2_6_0,pow=0,err=0,location=0,name=%42%65%64%72%6f%6f%6d,icon=0,method=polling,port=30050,id=000002n2,pw=XXXXXX,lpw_flag=0,adp_kind=2,pv=2,cpv=2,cpv_minor=00,led=1,en_setzone=1,mac=XXXXXXXXXXXX,adp_mode=run,en_hol=0,grp_name=,en_grp=0

ret=OK,model=0ABB,type=N,pv=2,cpv=2,cpv_minor=00,mid=NA,humd=0,s_humd=0,acled=0,land=0,elec=0,temp=1,temp_rng=0,m_dtct=1,ac_dst=--,disp_dry=0,dmnd=0,en_scdltmr=1,en_frate=1,en_fdir=1,s_fdir=3,en_rtemp_a=0,en_spmode=0,en_ipw_sep=0

ret=OK,pow=0,mode=4,adv=,stemp=22.0,shum=0,dt1=25.0,dt2=M,dt3=25.0,dt4=22.0,dt5=22.0,dt7=25.0,dh1=AUTO,dh2=50,dh3=0,dh4=0,dh5=0,dh7=AUTO,dhh=50,b_mode=4,b_stemp=22.0,b_shum=0,alert=255,f_rate=A,f_dir=0,b_f_rate=A,b_f_dir=0,dfr1=5,dfr2=5,dfr3=5,dfr4=A,dfr5=A,dfr6=5,dfr7=5,dfrh=5,dfd1=0,dfd2=0,dfd3=0,dfd4=0,dfd5=0,dfd6=0,dfd7=0,dfdh=0

ret=OK,htemp=21.0,hhum=-,otemp=14.0,err=0,cmpfreq=0

[travellingnashes]

BTW version I have just posted fails with : {"ret":"OK,htemp":"21.0,hhum":"-,otemp":"14.0,err":"0,cmpfreq":"0"}
^

SyntaxError: Unexpected token :
at Object.parse (native)
at Object. (/Users/nashm/.nvm/versions/node/v5.0.0/lib/node_modules/homebridge-daikin/index.js:225:21)
at Request.self.callback (/Users/nashm/.nvm/versions/node/v5.0.0/lib/node_modules/homebridge-daikin/node_modules/request/request.js:187:22)

[DirtyDevWork]

@travellingnashes, which version of the plugin are you running?

[DirtyDevWork]

Ah, well getting the same error on the current version. Looks like my script converting the response from the Daikin to JSON is leaving out occasional quotation marks. I'll open an issue to track progress fixing that

[icepicknz]

Thanks for that, i'll look out for a response; is it normal behaviour to cause the whole home bridge to crash rather than just error for the task?

[travellingnashes]

Latest 0.5 ?

On 17 Oct 2016, at 23:22, icepicknz [email protected] wrote:

Thanks for that, i'll look out for a response; is it normal behaviour to cause the whole home bridge to crash rather than just error for the task?

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub, or mute the thread.

[DirtyDevWork]

@icepicknz It isn't, but for the moment I'd recommend comment out the Daikin accessory info from HomeBridge's config.json file.
I'm going to update the Readme on NPM to instruct people not to use it quite yet unless they want to fork it to troubleshoot it themselves

@travellingnashes Thanks for that, please comment out the accessory section for Daikin for the moment and I'll update you when it is done. If you're interested in watching the progress, keep an eye on Issue #8

[DirtyDevWork]

@icepicknz @travellingnashes just letting you know this issue is resolved as of version 0.0.10, but it cannot change modes and power for the Daikin, only reads sensors and mode info from the Daikin.
It's late so I'm calling it a night and will be back getting it all up and able to control the Daikin in about 9 hours or so. Thanks for your help nailing these ones down so far!

[mbnn]

Here you go for my Daikin Unit (Model says: FTXG35JV1BW) from 2012 with Wifi adapter:

ret=OK,type=aircon,reg=eu,dst=1,ver=2_6_0,pow=0,err=0,location=0,name=%57%6f%6f%6e%6b%61%6d%65%72,icon=2,method=polling,port=30050,id=tcaircoliving,pw=XXXXXX,lpw_flag=0,adp_kind=2,pv=0,cpv=0,cpv_minor=00,led=1,en_setzone=1,mac=XXXXXXXXXXXX,adp_mode=run,en_hol=0,grp_name=,en_grp=0

ret=OK,model=NOTSUPPORT,type=N,pv=0,cpv=0,mid=NA,s_fdir=1,en_scdltmr=1

ret=OK,pow=0,mode=1,adv=,stemp=21.0,shum=0,dt1=21.0,dt2=M,dt3=25.0,dt4=25.0,dt5=25.0,dt7=21.0,dh1=0,dh2=50,dh3=0,dh4=0,dh5=0,dh7=0,dhh=50,b_mode=1,b_stemp=21.0,b_shum=0,alert=255,f_rate=A,f_dir=0,b_f_rate=A,b_f_dir=0,dfr1=A,dfr2=5,dfr3=5,dfr4=5,dfr5=5,dfr6=5,dfr7=A,dfrh=5,dfd1=0,dfd2=0,dfd3=0,dfd4=0,dfd5=0,dfd6=0,dfd7=0,dfdh=0

ret=OK,htemp=18.0,hhum=-,otemp=-,err=0,cmpfreq=0

I hope we can make this homebridge plugin work for my model as well :)

[DirtyDevWork]

Thanks @mbnn, looking at what you're getting back from your system, I'm pretty sure it should be working already. Have you tried the plugin yet?

@icepicknz and @travellingnashes, what Model is your Air Conditioner? Just so I can keep track.

[mbnn]

You are right :) It seems to work completely! Thank you!

[DirtyDevWork]

@mbnn, can you just check that you can set temperatures in all modes and switch on and off, let me know if any of those throw and unusual messages for homebridge?

[mbnn]

I have tried cool, heat, auto, off and temperature settings and it all seems to work for me :)
The only strange thing is that simply clicking the main icon (and not going to details) doesnt do anything.

[travellingnashes]

I have a Daikin Emura II

On 3 Nov 2016, at 10:02, Michiel Beenen <[email protected] mailto:[email protected]> wrote:

I have tried cool, heat, auto, off and temperature settings and it all seems to work for me :)

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub #5 (comment), or mute the thread https://github.com/notifications/unsubscribe-auth/AGCailknLbmZZlkRpAdqqOXPrxEwxf0aks5q6bEngaJpZM4KVTiw.

[DirtyDevWork]

@mbnn, I noticed that too. I think it's a HomeKit thing, because the Daikin isn't listed as having a switch characteristic (so no plain On and Off). I may be able to get that to behave that way in the future, I'll look into it later on.

@travellingnashes, thanks for the info. Is it working with On/Off, modes and temperature setting at the moment?

[ghost]

Evening,

Any plans to support Daikin units that respond to requests that look like this:

http://192.168.x.xx:2000/ac.cgi?pass=XXXXX ?

Note that this request returned:

opmode=0&units=.&settemp=24.0&fanspeed=1&fanflags=1&acmode=8&tonact=0&toffact=0&prog=0&time=10:10&day=6&roomtemp=25&outsidetemp=24&louvre=1&zone=0&flt=0&test=0&errcode=&sensors=1

More info on the request parameters here: http://forums.whirlpool.net.au/archive/2440219

Looks like the parameters are different to the ones this homebridge-daikin module currently supports so may be a big job. Happy to help if I can.

Update: I have taken a copy of the code and I am looking to add support for Daikin SKYFi. Looks straight forward and so I confident I can do it ...

Update 2: Done it! I have my other unit which is has a SKYFi interface working through the Home app. Not as easy as I had thought. Basically a rewrite of this module's .js as the http commands sent to the unit are so different and my unit hates two commands to be sent at the same time. Thinking that I will create a new GIT project rather than merge the branch unless anyone wants to take on the merge?

[ghost]

Response from my other Daikin unit (which is on and cooling) as follows:

common/basic_info -> ret=OK,type=aircon,reg=th,dst=1,ver=2_9_0,pow=1,err=0,location=0,name=%44%61%69%6b%69%6e%41%50%39%33%30%30%36,icon=0,method=polling,port=30050,id=XXXXXX,pw=XXXXXX,lpw_flag=0,adp_kind=2,pv=2,cpv=2,cpv_minor=00,led=1,en_setzone=1,mac=XXXXXX,adp_mode=run,en_hol=0,grp_name=,en_grp=0

aircon/get_model_info -> ret=OK,model=0C8B,type=N,pv=2,cpv=2,cpv_minor=00,mid=NA,humd=0,s_humd=0,acled=0,land=0,elec=0,temp=1,temp_rng=0,m_dtct=1,ac_dst=--,disp_dry=0,dmnd=0,en_scdltmr=1,en_frate=1,en_fdir=1,s_fdir=3,en_rtemp_a=0,en_spmode=0,en_ipw_sep=0,en_mompow=0

aircon/get_control_info -> ret=OK,pow=1,mode=3,adv=,stemp=24.0,shum=0,dt1=25.0,dt2=M,dt3=24.0,dt4=25.0,dt5=25.0,dt7=25.0,dh1=AUTO,dh2=50,dh3=0,dh4=0,dh5=0,dh7=AUTO,dhh=50,b_mode=3,b_stemp=24.0,b_shum=0,alert=255,f_rate=A,f_dir=3,b_f_rate=A,b_f_dir=3,dfr1=5,dfr2=5,dfr3=A,dfr4=5,dfr5=5,dfr6=5,dfr7=5,dfrh=5,dfd1=0,dfd2=0,dfd3=3,dfd4=0,dfd5=0,dfd6=0,dfd7=0,dfdh=0

aircon/get_sensor_info -> ret=OK,htemp=25.0,hhum=-,otemp=34.0,err=0,cmpfreq=34