RPi HQ Camera (A)WB - Day/Night #782
Replies: 8 comments
-
|
@jimjackii, someone else had luck using red: 3.24 and blue: 1.47. Can you try that and see if it works for day and night? If not, I'll add your request to the "to do" list, but make no guarantees when or if it'll be implemented. |
Beta Was this translation helpful? Give feedback.
-
|
Hi Eric,
thanks. I will try these settings.
When the result ist not ok I must find a solution to restartt the allsky
service with adjusted settings dir nicht ans day.
EricClaeys ***@***.***> schrieb am Do., 11. Nov. 2021, 17:29:
… @jimjackii <https://github.com/jimjackii>, someone else had luck using
red: 3.24 and blue: 1.47. Can you try that and see if it works for day and
night? If not, I'll add your request to the "to do" list, but make no
guarantees when or if it'll be implemented.
Try those settings at night with AWB off, and with AWB on during the day
(I realize you'll need to restart the service).
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
<#782 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AWOBQJGDN6LL372UCZAI6PDULPVOJANCNFSM5H2KFVNA>
.
Triage notifications on the go with GitHub Mobile for iOS
<https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675>
or Android
<https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>.
|
Beta Was this translation helpful? Give feedback.
-
|
I tested different settings for WB and AWB. These 3 pictures at night: Night - Manual WB with R=3.27 and B=1.47 - the result is a very orange night picture. Night - Manual WB with B=2.45 and B=1.9 - its ok for me so far. Night - AWB - the picture is more orange to red than the WB picture above. At night the gain was manually at 5 or 6 - I had still experimented a little. These 2 pictures at day: Day - Manual WB with R=2.4 and B=1.9 - this is very blue. Day - AWB - it's ok for me. It's amazing how the images differ during the day and night with the same settings. I live near a big city - and unfortunately there is a lot of (orange) artificial light at night. I will now try to find an automatic switch between WB / night and AWB / day with the existing scripts. |
Beta Was this translation helpful? Give feedback.
-
|
@jimjackii, you'll want the change of the settings_RPiHQ.json file to be at the same time as the day/night switch. Is it just the "Auto White Balance" setting that needs day and night versions, or also the "red" and "blue" settings? |
Beta Was this translation helpful? Give feedback.
-
|
@EricClaeys I would leave the manual WB values fixed, ie. during the day the camera would run with AWB and at night with manual WB and the fixed settings, e.g. B=2.45 and B=1.9. |
Beta Was this translation helpful? Give feedback.
-
|
@jimjackii, I added this request to our Projects list for both the ZWO and RPiHQ cameras. |
Beta Was this translation helpful? Give feedback.
-
|
@EricClaeys |
Beta Was this translation helpful? Give feedback.
-
|
Closing Discussion. Separate day and night AWB exist in v2024.12.06, due December 6, 2024. |
Beta Was this translation helpful? Give feedback.
-
Hi,
I'm new to AllSky and I have a system with RasPi 2B and Raspi HW camera running.
The system runs very well so far.
But there is one problem - (A)WB on day and night.
With AWB the day pictures ok but the night pictures are wrong. The night pictures goes to orange color depends on the many lights here in my area.
Without AWB and manual settings for the parameters "Red balance = 2.4" and "Blue balance = 1.9" the night pictures ok but the day pictures now wrong with many blue color. These parameters give me the best night results.
Is it possible to implement WB / AWB settings separated for day and night?
Thanks.
Steffen
Beta Was this translation helpful? Give feedback.
All reactions