Remote server .. loading

[FafaGithub77]

Hello, after some months of inactivity due to health reasons, i have revived my allsky cam; i decided to reinstall everyting by scratch and installation went fine, no error no issues, ftp works
i have my raspberry that suppose to send files to my website, like in past but is not - basically live view is working but in website i have "loading" and no errors at all - maybe there is a setting am i missing?

Some note in order to help troubleshooting
once installed the ./remoteWebsiteInstall.sh everything was successfull- but i got message on remote website cause seems configuration.json was empty - so i have edited then copied the local one via webgui and i pasted below in Remote_configuration.json section

when i (re)installed the remote website, file has been updated with success; (if edit remote configuration.json in editor, once i saved is always sent to the server without any issue)

indeed error disappear but i stil have a permanent loading status

If i turn off daytime images, message regularry appears in website, but still loading instead have yellow message (camera is off during the day)

additional info: Use Local Website is disabled ,Remote Website is enabled, rest is as default

Thanks for any tip

[FafaGithub77]

Hello, just fixed changing row in
remote_configuration.json from "imageName": "/current/tmp/image.jpg", to "imageName": "image.jpg"

thanks

[EricClaeys]

Glad you got it working.
Would you please attach ~/allsky/config/logs/install.log and ~/allsky/config/logs/remoteWebsiteInstall.log so I can debug why the configuration.json file on the remote server was empty?
Do you remember the exact message on the remote Website? Did it say the file was empty or it needed to be configured?
And was remote_configuration.json on the Pi empty as well, before you copied the contents of configuration.json to it in the WebUI's Editor page?

[FafaGithub77]

Hi ,
sure! , let me say that probably mess has been generated by me and there are not bugs - but i spent time to review what i did, hoping will be useful.

A)At beginning message was about lack of configuration.json - this is probably because 1st time i did not enable remote website in gui before to install it.. (but is just my supposition)
B) then, once i see that file was missing i (wrongly) uploaded configuration.json via ftp (instead use the gui) - from this moment i got message that configuration.json needed to be configured (and was true cause i have forgot to set one row that still had XX..)
C) Finally i did what i described in above post, (in GUI i correctly edited the file , replacing XX, then i did copy paste configuration.json content to remote_configuration.json that was empty in GUI , not able to say if was normal)
then i see "loading" message and i have open this post - one more time error was about a trivial setting

install.log
remoteWebsiteinstall.log