New Install Issues

[Tubeguy]

So let me start by saying this is my first time playing with linux and a SBC. I built my project with a Libre AML-S905X-CC loading Rasbian.

I have loaded Allsky and can get to the web interface but no image. Just a green box that says "Allsky is Starting up".
I noticed in system the throttle status is RED.

During install
I noticed these lines:
Using ZWO camera.
./install.sh: line 460: [[: Can't open device file: /dev/vcio
Try creating a device file with: sudo mknod /dev/vcio c 100 0: syntax error: invalid arithmetic operator (error token is "'t open device file: /dev/vcio
Try creating a device file with: sudo mknod /dev/vcio c 100 0")
./install.sh: line 460: [[: Can't open device file: /dev/vcio
Try creating a device file with: sudo mknod /dev/vcio c 100 0: syntax error: invalid arithmetic operator (error token is "'t open device file: /dev/vcio
Try creating a device file with: sudo mknod /dev/vcio c 100 0")
./install.sh: line 460: [[: Can't open device file: /dev/vcio
Try creating a device file with: sudo mknod /dev/vcio c 100 0: syntax error: invalid arithmetic operator (error token is "'t open device file: /dev/vcio
Try creating a device file with: sudo mknod /dev/vcio c 100 0")

• Size of current swap (1 MB) is sufficient; no change needed.
• /home/quentin/allsky/tmp is now in memory.

any process to trouble shoot? And please forgive my knowledge of Linux, but I am learning. Thanks in advance for any help!

[EricClaeys]

@Tubeguy do you have a ZWO camera?
What is a "Libre AML-S905X-CC"?
The device it's trying to access is an operating system file, not Allsky, so the underlying issue is probably with the operating system.

[Tubeguy]

Yes, the board I’m using is a clone. Trying to save few bucks vs a pi. Well, researching this it seems they have issues. I have a Pi coming and will try again.

[EricClaeys]

We have yet to find a clone that's compatible with the Pi.