Allsky was on map, now isn't, conflict with old unit?

[EorEquis]

Lots to unpack here, sorry.

• Old RasPi died. Had to replace. It still shows on the map, despite not having been running for several weeks now.
• Replaced with new RasPi, set up allsky, all well and good. Gave it "close enough" latlong to get started during config, it showed up on the map as I would expect, a bit off from the other. Great.
• This morning, got around to feeding it correct LatLong (also a bit off from the old), and...it disappeared from the map, can't get it back.

Per other threads, I have :

• Ensured config.js and camera settings LatLong match.
• Run postToMap.sh --debug --force serveral times, always with 200 response, and "UPDATED".
• Checked /var/log/allsky.log for postToMap.sh errors, found none.

Would having someone remove the old map entry and allow me to push this new data help, or something else I need to do?

Thanks.

[EorEquis]

Looks like the issue was down to an "N" being added in config.js for lattitude. Not sure how or when.

The old device remains on the map, however, and I have no way to pull a machine id or anything for it, since that pi is dead. Please let me know how I can get it removed. :)

[EricClaeys]

@EorEquis I can remove it, but need to know something about the old entry - Owner, Location, URL, etc. And how will I tell the difference between the old and new camera?

[EorEquis]

Owner TriStar Observatory, location Sparta, TN.

Remove the one furthest west, with Raspberry Pi 3 as computer. :)

Thanks, Eric!

[EricClaeys]

I'll remove it. It's machine ID was 2df159f985e74a33b3a1e1300b520df3.

[EricClaeys]

Deleted