refactor deploy.yml #35
Triggered via pull request
October 4, 2023 14:38
robertodr
Status
Failure
Total duration
4h 30m 48s
Artifacts
1
deploy.yml
on: pull_request
Generate wheels matrix
9s
Build SDist
43s
Matrix: build-cuda11-gpu-wheels
Matrix: build-cuda12-gpu-wheels
Matrix: build-wheels
Upload if release
0s
Annotations
8 errors and 44 warnings
|
Build cp310-manylinux_s390x wheel
Command ['pip', 'install', '/tmp/cibuildwheel/repaired_wheel/qiskit_aer-0.13.0-cp310-cp310-manylinux_2_28_s390x.whl'] failed with code 1.
|
|
Build cp310-manylinux_s390x wheel
Process completed with exit code 1.
|
|
Build cp39-manylinux_s390x wheel
The operation was canceled.
|
|
Build cp311-manylinux_s390x wheel
The operation was canceled.
|
|
Build cp39-manylinux_ppc64le wheel
The operation was canceled.
|
|
Build cp311-manylinux_ppc64le wheel
The operation was canceled.
|
|
Build cp38-manylinux_ppc64le wheel
The operation was canceled.
|
|
Build cp38-manylinux_s390x wheel
The operation was canceled.
|
|
Build cp39-macosx_arm64 wheel
While arm64 wheels can be built on x86_64, they cannot be tested. The ability to test the arm64 wheels will be added in a future release of cibuildwheel, once Apple Silicon CI runners are widely available. To silence this warning, set `CIBW_TEST_SKIP: *-macosx_arm64`.
|
|
Build cp311-macosx_arm64 wheel
While arm64 wheels can be built on x86_64, they cannot be tested. The ability to test the arm64 wheels will be added in a future release of cibuildwheel, once Apple Silicon CI runners are widely available. To silence this warning, set `CIBW_TEST_SKIP: *-macosx_arm64`.
|
|
Build cp310-macosx_arm64 wheel
While arm64 wheels can be built on x86_64, they cannot be tested. The ability to test the arm64 wheels will be added in a future release of cibuildwheel, once Apple Silicon CI runners are widely available. To silence this warning, set `CIBW_TEST_SKIP: *-macosx_arm64`.
|
|
Build cp38-macosx_arm64 wheel
While arm64 wheels can be built on x86_64, they cannot be tested. The ability to test the arm64 wheels will be added in a future release of cibuildwheel, once Apple Silicon CI runners are widely available. To silence this warning, set `CIBW_TEST_SKIP: *-macosx_arm64`.
|
|
Build cp310-manylinux_ppc64le wheel
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build cp310-manylinux_ppc64le wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp310-manylinux_ppc64le wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp310-manylinux_ppc64le wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp310-manylinux_ppc64le wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp310-manylinux_s390x wheel
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build cp310-manylinux_s390x wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp310-manylinux_s390x wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp310-manylinux_s390x wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp310-manylinux_s390x wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp39-manylinux_s390x wheel
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build cp39-manylinux_s390x wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp39-manylinux_s390x wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp39-manylinux_s390x wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp39-manylinux_s390x wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp311-manylinux_s390x wheel
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build cp311-manylinux_s390x wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp311-manylinux_s390x wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp311-manylinux_s390x wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp311-manylinux_s390x wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp39-manylinux_ppc64le wheel
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build cp39-manylinux_ppc64le wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp39-manylinux_ppc64le wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp39-manylinux_ppc64le wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp39-manylinux_ppc64le wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp311-manylinux_ppc64le wheel
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build cp311-manylinux_ppc64le wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp311-manylinux_ppc64le wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp311-manylinux_ppc64le wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp311-manylinux_ppc64le wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp38-manylinux_ppc64le wheel
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build cp38-manylinux_ppc64le wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp38-manylinux_ppc64le wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp38-manylinux_ppc64le wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp38-manylinux_ppc64le wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp38-manylinux_s390x wheel
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build cp38-manylinux_s390x wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp38-manylinux_s390x wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp38-manylinux_s390x wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build cp38-manylinux_s390x wheel
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
Artifacts
Produced during runtime
| Name | Size | |
|---|---|---|
|
artifact
Expired
|
335 MB |
|