README.md

Flick3D

This is c++ language source library for Flick3D boards.

Based on: https://github.com/PiSupply/Flick/tree/master/firmware/libcpp

---

Table of Contents

• 1) Hardware
  • 1.1) Hardware Requirements
  • 1.2) Hardware Setup
• 2) Software
  • 2.1) Setup MRAA
  • 2.2) Build Example

---

1) Hardware

1.1) Hardware Requirements

• DragonBoard-410c (tested) / HiKey / Bubblegum-96

• SeeedStudio Sensor Mezzanine (tested) / Audio Mezzanine (Only Compatible with DragonBoard-410c)

• Flick3D (tested on Large)

1.2) Hardware Setup

Note: Make sure the Voltage Levels are at 3v3 and not 1v8 or 5v

96Boards	Flick3D
I2C-1 SDA	SDA
I2C-1 SCL	SCL
RST	GPIO-K
TS	GPIO-L

---

2) Software

2.1) Setup MRAA

$ git clone https://github.com/Mani-Sadhasivam/mraa
$ cd mraa
$ git checkout 28b0550d9e016b02f472005bbdedc315f0cd23d9
$ mkdir build
$ cd build
$ cmake -DCMAKE_INSTALL_PREFIX:PATH=/usr ..
$ make -j$(nproc)
$ sudo make install

Note: these steps may change in the near future

2.2) Build Example

• C++ source files flick.h and flick.cpp defines API class that provides programming interface for Flick 3D gesture boards.
• Include flick.h and flick.cpp to your c++ project.
• Depends on mraa library.

Build example program on Linux:

g++ flick_example.cpp flick.cpp -o flick_example -lmraa

Run example:

sudo ./flick_example