builder.go

package wazero

import (
	"context"

	"github.com/tetratelabs/wazero/api"
	"github.com/tetratelabs/wazero/internal/wasm"
)

// HostFunctionBuilder defines a host function (in Go), so that a
// WebAssembly binary (e.g. %.wasm file) can import and use it.
//
// Here's an example of an addition function:
//
//	hostModuleBuilder.NewFunctionBuilder().
//		WithFunc(func(cxt context.Context, x, y uint32) uint32 {
//			return x + y
//		}).
//		Export("add")
//
// # Memory
//
// All host functions act on the importing api.Module, including any memory
// exported in its binary (%.wasm file). If you are reading or writing memory,
// it is sand-boxed Wasm memory defined by the guest.
//
// Below, `m` is the importing module, defined in Wasm. `fn` is a host function
// added via Export. This means that `x` was read from memory defined in Wasm,
// not arbitrary memory in the process.
//
//	fn := func(ctx context.Context, m api.Module, offset uint32) uint32 {
//		x, _ := m.Memory().ReadUint32Le(ctx, offset)
//		return x
//	}
type HostFunctionBuilder interface {
	// WithGoFunction is an advanced feature for those who need higher
	// performance than WithFunc at the cost of more complexity.
	//
	// Here's an example addition function:
	//
	//	builder.WithGoFunction(api.GoFunc(func(ctx context.Context, params []uint64) []uint64 {
	//		x, y := uint32(params[0]), uint32(params[1])
	//		sum := x + y
	//		return []uint64{sum}
	//	}, []api.ValueType{api.ValueTypeI32, api.ValueTypeI32}, []api.ValueType{api.ValueTypeI32})
	//
	// As you can see above, defining in this way implies knowledge of which
	// WebAssembly api.ValueType is appropriate for each parameter and result.
	//
	// See WithGoModuleFunction if you also need to access the calling module.
	WithGoFunction(fn api.GoFunction, params, results []api.ValueType) HostFunctionBuilder

	// WithGoModuleFunction is an advanced feature for those who need higher
	// performance than WithFunc at the cost of more complexity.
	//
	// Here's an example addition function that loads operands from memory:
	//
	//	builder.WithGoModuleFunction(api.GoModuleFunc(func(ctx context.Context, mod api.Module, params []uint64) []uint64 {
	//		mem := m.Memory()
	//		offset := uint32(params[0])
	//
	//		x, _ := mem.ReadUint32Le(ctx, offset)
	//		y, _ := mem.ReadUint32Le(ctx, offset + 4) // 32 bits == 4 bytes!
	//		sum := x + y
	//
	//		return []uint64{sum}
	//	}, []api.ValueType{api.ValueTypeI32, api.ValueTypeI32}, []api.ValueType{api.ValueTypeI32})
	//
	// As you can see above, defining in this way implies knowledge of which
	// WebAssembly api.ValueType is appropriate for each parameter and result.
	//
	// See WithGoFunction if you don't need access to the calling module.
	WithGoModuleFunction(fn api.GoModuleFunction, params, results []api.ValueType) HostFunctionBuilder

	// WithFunc uses reflect.Value to map a go `func` to a WebAssembly
	// compatible Signature. An input that isn't a `func` will fail to
	// instantiate.
	//
	// Here's an example of an addition function:
	//
	//	builder.WithFunc(func(cxt context.Context, x, y uint32) uint32 {
	//		return x + y
	//	})
	//
	// # Defining a function
	//
	// Except for the context.Context and optional api.Module, all parameters
	// or result types must map to WebAssembly numeric value types. This means
	// uint32, int32, uint64, int64, float32 or float64.
	//
	// api.Module may be specified as the second parameter, usually to access
	// memory. This is important because there are only numeric types in Wasm.
	// The only way to share other data is via writing memory and sharing
	// offsets.
	//
	//	builder.WithFunc(func(ctx context.Context, m api.Module, offset uint32) uint32 {
	//		mem := m.Memory()
	//		x, _ := mem.ReadUint32Le(ctx, offset)
	//		y, _ := mem.ReadUint32Le(ctx, offset + 4) // 32 bits == 4 bytes!
	//		return x + y
	//	})
	//
	// This example propagates context properly when calling other functions
	// exported in the api.Module:
	//
	//	builder.WithFunc(func(ctx context.Context, m api.Module, offset, byteCount uint32) uint32 {
	//		fn = m.ExportedFunction("__read")
	//		results, err := fn(ctx, offset, byteCount)
	//	--snip--
	WithFunc(interface{}) HostFunctionBuilder

	// WithName defines the optional module-local name of this function, e.g.
	// "random_get"
	//
	// Note: This is not required to match the Export name.
	WithName(name string) HostFunctionBuilder

	// WithParameterNames defines optional parameter names of the function
	// signature, e.x. "buf", "buf_len"
	//
	// Note: When defined, names must be provided for all parameters.
	WithParameterNames(names ...string) HostFunctionBuilder

	// WithResultNames defines optional result names of the function
	// signature, e.x. "errno"
	//
	// Note: When defined, names must be provided for all results.
	WithResultNames(names ...string) HostFunctionBuilder

	// Export exports this to the HostModuleBuilder as the given name, e.g.
	// "random_get"
	Export(name string) HostModuleBuilder
}

// HostModuleBuilder is a way to define host functions (in Go), so that a
// WebAssembly binary (e.g. %.wasm file) can import and use them.
//
// Specifically, this implements the host side of an Application Binary
// Interface (ABI) like WASI or AssemblyScript.
//
// For example, this defines and instantiates a module named "env" with one
// function:
//
//	ctx := context.Background()
//	r := wazero.NewRuntime(ctx)
//	defer r.Close(ctx) // This closes everything this Runtime created.
//
//	hello := func() {
//		fmt.Fprintln(stdout, "hello!")
//	}
//	env, _ := r.NewHostModuleBuilder("env").
//		NewFunctionBuilder().WithFunc(hello).Export("hello").
//		Instantiate(ctx, r)
//
// If the same module may be instantiated multiple times, it is more efficient
// to separate steps. Here's an example:
//
//	compiled, _ := r.NewHostModuleBuilder("env").
//		NewFunctionBuilder().WithFunc(getRandomString).Export("get_random_string").
//		Compile(ctx)
//
//	env1, _ := r.InstantiateModule(ctx, compiled, wazero.NewModuleConfig().WithName("env.1"))
//	env2, _ := r.InstantiateModule(ctx, compiled, wazero.NewModuleConfig().WithName("env.2"))
//
// See HostFunctionBuilder for valid host function signatures and other details.
//
// # Notes
//
//   - HostModuleBuilder is mutable: each method returns the same instance for
//     chaining.
//   - methods do not return errors, to allow chaining. Any validation errors
//     are deferred until Compile.
//   - Insertion order is not retained. Anything defined by this builder is
//     sorted lexicographically on Compile.
type HostModuleBuilder interface {
	// Note: until golang/go#5860, we can't use example tests to embed code in interface godocs.

	// NewFunctionBuilder begins the definition of a host function.
	NewFunctionBuilder() HostFunctionBuilder

	// Compile returns a CompiledModule that can be instantiated by Runtime.
	Compile(context.Context) (CompiledModule, error)

	// Instantiate is a convenience that calls Compile, then Runtime.InstantiateModule.
	// This can fail for reasons documented on Runtime.InstantiateModule.
	//
	// Here's an example:
	//
	//	ctx := context.Background()
	//	r := wazero.NewRuntime(ctx)
	//	defer r.Close(ctx) // This closes everything this Runtime created.
	//
	//	hello := func() {
	//		fmt.Fprintln(stdout, "hello!")
	//	}
	//	env, _ := r.NewHostModuleBuilder("env").
	//		NewFunctionBuilder().WithFunc(hello).Export("hello").
	//		Instantiate(ctx)
	//
	// # Notes
	//
	//   - Closing the Runtime has the same effect as closing the result.
	//   - Fields in the builder are copied during instantiation: Later changes do not affect the instantiated result.
	//   - To avoid using configuration defaults, use Compile instead.
	Instantiate(context.Context) (api.Module, error)
}

// hostModuleBuilder implements HostModuleBuilder
type hostModuleBuilder struct {
	r            *runtime
	moduleName   string
	nameToGoFunc map[string]interface{}
	funcToNames  map[string]*wasm.HostFuncNames
}

// NewHostModuleBuilder implements Runtime.NewHostModuleBuilder
func (r *runtime) NewHostModuleBuilder(moduleName string) HostModuleBuilder {
	return &hostModuleBuilder{
		r:            r,
		moduleName:   moduleName,
		nameToGoFunc: map[string]interface{}{},
		funcToNames:  map[string]*wasm.HostFuncNames{},
	}
}

// hostFunctionBuilder implements HostFunctionBuilder
type hostFunctionBuilder struct {
	b           *hostModuleBuilder
	fn          interface{}
	name        string
	paramNames  []string
	resultNames []string
}

// WithGoFunction implements HostFunctionBuilder.WithGoFunction
func (h *hostFunctionBuilder) WithGoFunction(fn api.GoFunction, params, results []api.ValueType) HostFunctionBuilder {
	h.fn = &wasm.HostFunc{
		ParamTypes:  params,
		ResultTypes: results,
		Code:        wasm.Code{GoFunc: fn},
	}
	return h
}

// WithGoModuleFunction implements HostFunctionBuilder.WithGoModuleFunction
func (h *hostFunctionBuilder) WithGoModuleFunction(fn api.GoModuleFunction, params, results []api.ValueType) HostFunctionBuilder {
	h.fn = &wasm.HostFunc{
		ParamTypes:  params,
		ResultTypes: results,
		Code:        wasm.Code{GoFunc: fn},
	}
	return h
}

// WithFunc implements HostFunctionBuilder.WithFunc
func (h *hostFunctionBuilder) WithFunc(fn interface{}) HostFunctionBuilder {
	h.fn = fn
	return h
}

// WithName implements HostFunctionBuilder.WithName
func (h *hostFunctionBuilder) WithName(name string) HostFunctionBuilder {
	h.name = name
	return h
}

// WithParameterNames implements HostFunctionBuilder.WithParameterNames
func (h *hostFunctionBuilder) WithParameterNames(names ...string) HostFunctionBuilder {
	h.paramNames = names
	return h
}

// WithResultNames implements HostFunctionBuilder.WithResultNames
func (h *hostFunctionBuilder) WithResultNames(names ...string) HostFunctionBuilder {
	h.resultNames = names
	return h
}

// Export implements HostFunctionBuilder.Export
func (h *hostFunctionBuilder) Export(exportName string) HostModuleBuilder {
	if h.name == "" {
		h.name = exportName
	}
	names := &wasm.HostFuncNames{
		Name:        h.name,
		ParamNames:  h.paramNames,
		ResultNames: h.resultNames,
	}
	if fn, ok := h.fn.(*wasm.HostFunc); ok {
		if fn.Name == "" {
			fn.Name = names.Name
		}
		fn.ParamNames = names.ParamNames
		fn.ResultNames = names.ResultNames
		fn.ExportNames = []string{exportName}
	}
	h.b.nameToGoFunc[exportName] = h.fn
	h.b.funcToNames[exportName] = names
	return h.b
}

// ExportHostFunc implements wasm.HostFuncExporter
func (b *hostModuleBuilder) ExportHostFunc(fn *wasm.HostFunc) {
	b.nameToGoFunc[fn.ExportNames[0]] = fn
}

// NewFunctionBuilder implements HostModuleBuilder.NewFunctionBuilder
func (b *hostModuleBuilder) NewFunctionBuilder() HostFunctionBuilder {
	return &hostFunctionBuilder{b: b}
}

// Compile implements HostModuleBuilder.Compile
func (b *hostModuleBuilder) Compile(ctx context.Context) (CompiledModule, error) {
	module, err := wasm.NewHostModule(b.moduleName, b.nameToGoFunc, b.funcToNames, b.r.enabledFeatures)
	if err != nil {
		return nil, err
	} else if err = module.Validate(b.r.enabledFeatures); err != nil {
		return nil, err
	}

	c := &compiledModule{module: module, compiledEngine: b.r.store.Engine}
	listeners, err := buildListeners(ctx, module)
	if err != nil {
		return nil, err
	}

	if err = b.r.store.Engine.CompileModule(ctx, module, listeners, false); err != nil {
		return nil, err
	}

	// typeIDs are static and compile-time known.
	typeIDs, err := b.r.store.GetFunctionTypeIDs(module.TypeSection)
	if err != nil {
		return nil, err
	}
	c.typeIDs = typeIDs

	return c, nil
}

// Instantiate implements HostModuleBuilder.Instantiate
func (b *hostModuleBuilder) Instantiate(ctx context.Context) (api.Module, error) {
	if compiled, err := b.Compile(ctx); err != nil {
		return nil, err
	} else {
		compiled.(*compiledModule).closeWithModule = true
		return b.r.InstantiateModule(ctx, compiled, NewModuleConfig())
	}
}