diff --git a/docs/hardware/printhead.md b/docs/hardware/printhead.md
index 1324a7ca..a7e23f75 100644
--- a/docs/hardware/printhead.md
+++ b/docs/hardware/printhead.md
@@ -412,6 +412,11 @@ At the top in front of the little hole where the filament is inserted you find a
 You can access the inside of the feeder system by dismounting the heatsink, which is located at the right side underneath the heatsink fan. The following picture shows the inside of the system.  
 
 ![Feeder inside](../assets/images/head_neo_feeder-inside_web.jpg)  
+
+??? info "Titan Aero Clone"
+
+    The extruder seems to be a clone of the "E3D Titan Aero", apparently made by "XCR3D" (look out for "XCR3D Titan").  
+    Therefore one can have a look at the [official E3D assembly instruction of the E3D Titan Aero](https://e3d-online.zendesk.com/hc/en-us/articles/360016764817-Titan-Aero-Assembly-Guide-Edition-2-) when it comes down to solving issues or taking it apart.  
   
 !!! warning "Retraction Settings"
 
@@ -438,6 +443,12 @@ In case you dropped something tiny like a screw or so in the holes at the top of
 
 If that doesn't work, see the expandable textbox below for further instructions about how to disassemble the gear box.   
 
+??? info "Titan Aero Clone"
+
+    The extruder seems to be a clone of the "E3D Titan Aero", apparently made by "XCR3D" (look out for "XCR3D Titan").  
+    Therefore one can have a look at the [official E3D assembly instruction of the E3D Titan Aero](https://e3d-online.zendesk.com/hc/en-us/articles/360016764817-Titan-Aero-Assembly-Guide-Edition-2-) when it comes down to solving issues or taking it apart.  
+  
+
 ??? example "Disassembling Procedure"  
 
     - There is a metal part with cooling fins underneath the 'big' fan at the right side, this is the heatsink. <br> ![Metal plate with cooling fins](../assets/images/head_neo_cooling-fins_web.jpg)