README.md

Overview

This program, scheduler.py, allows you to see how different schedulers perform under scheduling metrics such as response time, turnaround time, and total wait time. Three schedulers are "implemented": FIFO, SJF, and RR.

There are two steps to running the program.

First, run without the -c flag: this shows you what problem to solve without revealing the answers. For example, if you want to compute response, turnaround, and wait for three jobs using the FIFO policy, run this:

prompt> ./scheduler.py -p FIFO -j 3 -s 100

If that doesn't work, try this:

prompt> python ./scheduler.py -p FIFO -j 3 -s 100

This specifies the FIFO policy with three jobs, and, importantly, a specific random seed of 100. If you want to see the solution for this exact problem, you have to specify this exact same random seed again. Let's run it and see what happens. This is what you should see:

prompt> ./scheduler.py -p FIFO -j 3 -s 100
ARG policy FIFO
ARG jobs 3
ARG maxlen 10
ARG seed 100

Here is the job list, with the run time of each job: 
  Job 0 (length = 1)
  Job 1 (length = 4)
  Job 2 (length = 7)

Compute the turnaround time, response time, and wait time for each job. When you are done, run this program again, with the same arguments, but with -c, which will thus provide you with the answers. You can use -s or your own job list (-l 10,15,20 for example) to generate different problems for yourself.

As you can see from this example, three jobs are generated: job 0 of length 1, job 1 of length 4, and job 2 of length 7. As the program states, you can now use this to compute some statistics and see if you have a grip on the basic concepts.

Once you are done, you can use the same program to "solve" the problem and see if you did your work correctly. To do so, use the "-c" flag. The output:

prompt> ./scheduler.py -p FIFO -j 3 -s 100 -c
ARG policy FIFO
ARG jobs 3
ARG maxlen 10
ARG seed 100

Here is the job list, with the run time of each job: 
  Job 0 (length = 1)
  Job 1 (length = 4)
  Job 2 (length = 7)

** Solutions **

Execution trace:
  [time   0] Run job 0 for 1.00 secs (DONE)
  [time   1] Run job 1 for 4.00 secs (DONE)
  [time   5] Run job 2 for 7.00 secs (DONE)

Final statistics:
  Job   0 -- Response: 0.00  Turnaround 1.00  Wait 0.00
  Job   1 -- Response: 1.00  Turnaround 5.00  Wait 1.00
  Job   2 -- Response: 5.00  Turnaround 12.00  Wait 5.00

  Average -- Response: 2.00  Turnaround 6.00  Wait 2.00

As you can see from the figure, the -c flag shows you what happened. Job 0 ran first for 1 second, Job 1 ran second for 4, and then Job 2 ran for 7 seconds. Not too hard; it is FIFO, after all! The execution trace shows these results.

The final statistics are useful too: they compute the "response time" (the time a job spends waiting after arrival before first running), the "turnaround time" (the time it took to complete the job since first arrival), and the total "wait time" (any time spent ready but not running). The stats are shown per job and then as an average across all jobs. Of course, you should have computed these things all before running with the "-c" flag!

If you want to try the same type of problem but with different inputs, try changing the number of jobs or the random seed or both. Different random seeds basically give you a way to generate an infinite number of different problems for yourself, and the "-c" flag lets you check your own work. Keep doing this until you feel like you really understand the concepts.

One other useful flag is "-l" (that's a lower-case L), which lets you specify the exact jobs you wish to see scheduled. For example, if you want to find out how SJF would perform with three jobs of lengths 5, 10, and 15, you can run:

prompt> ./scheduler.py -p SJF -l 5,10,15
ARG policy SJF
ARG jlist 5,10,15

Here is the job list, with the run time of each job: 
  Job 0 (length = 5.0)
  Job 1 (length = 10.0)
  Job 2 (length = 15.0)
...

And then you can use -c to solve it again. Note that when you specify the exact jobs, there is no need to specify a random seed or the number of jobs: the jobs lengths are taken from your comma-separated list.

Of course, more interesting things happen when you use SJF (shortest-job first) or even RR (round robin) schedulers. Try them and see!

And you can always run

prompt> ./scheduler.py -h

to get a complete list of flags and options (including options such as setting the time quantum for the RR scheduler).